Passa alle informazioni sul prodotto
1 su 3

Mikroelektronika d.o.o.

LED Driver Click Board™

LED Driver Click Board™

SKU: MIKROE-2676

Prezzo di listino
£18.00 exc VAT
£21.60 inc VAT
Prezzo di listino £18.00 GBP Prezzo scontato
£18.00 exc VAT
£21.60 inc VAT
In offerta Esaurito
Spese di spedizione calcolate al check-out.
If no stock shown above, check availability

Metodi di pagamento

  • American Express
  • Visa
  • Mastercard
  • Maestro
  • PayPal
  • Apple Pay
  • Google Pay
  • Bank transfer
Visualizza dettagli completi

Panoramica

The LED Driver Click Board™ is based on the MCP1662 high-voltage step-up voltage driver from Microchip. The Click Board™ is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over PWM pin on the MikroBUS line.

The LED Driver Click Board™ carries the MCP1662 high-voltage step-up voltage driver from Microchip. The LED Driver Click Board™ is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over PWM pin on the mikroBUS™ line.

MCP1662 MCU FEATURES

The MCP1662 device is a compact, space-efficient, fixed-frequency, non-synchronous step-up converter optimized to drive LED strings with a constant current from a two- or three-cell alkaline or lithium Energizer®, or NiMH/NiCd, or one-cell Lithium-Ion or Li-Polymer batteries.

The device integrates a 36V, 800 mW low-side switch, which is protected by the 1.3A cycle-by-cycle inductor peak current limit operation.

How Does The LED Driver Click Board™ Work?

The LED Driver Click Board™ has a power input and a PWM input, so the LED lights can be dimmed. It's a great choice for driving LED strips.

SPECIFICATIONS

Type LED Drivers
Applications LED strings with a constant current from a two- or three-cell alkaline or lithium Energizer®, or NiMH/NiCd, or one-cell Lithium-Ion or Li-Polymer batteries
On-board modules MCP1662 High-Voltage Step-Up LED Driver
Key Features Open Load Protection, Overtemperature Protection, Input Voltage Range: 2.4V to 5.5V
Interface PWM
Compatibility mikroBUS
Click board size M (42.9 x 25.4 mm)
Input Voltage 3.3V or 5V

PINOUT DIAGRAM

This table shows how the pinout on the LED Driver Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).

Notes Pin Mikrobus logo.png Pin Notes
NC 1 AN PWM 16 PWM PWM input
NC 2 RST INT 15 NC
NC 3 CS TX 14 NC
NC 4 SCK RX 13 NC
NC 5 MISO SCL 12 NC
NC 6 MOSI SDA 11 NC
Power supply +3.3V 7 3.3V 5V 10 +5V Power supply
Ground GND 8 GND GND 9 GND Ground

MAXIMUM RATINGS

Description Min Typ Max Unit
Supply Voltage 2.4 5.5 V
Max Out Voltage 32 V
Max Out Current 4.2V Vin 8 LEDs 100 mA
Max Out Current 3.3V Vin 4 LEDs 125 mA
Max Out Current 5.0V Vin 4 LEDs 200 mA

Overview
CategoryLED Drivers
ApplicationsLED strings with a constant current from a two- or three-cell alkaline or lithium Energizer®, or NiMH/NiCd, or one-cell Lithium-Ion or Li-Polymer batteries
Key components
On-board modulesMCP1662 High-Voltage Step-Up LED Driver
Features
Key featuresOpen Load Protection, Overtemperature Protection
Interfaces
InterfacePWM
CompatibilitymikroBUS™
Electrical
Input voltage3.3V or 5V
Physical
Click board sizeM (42.9 x 25.4 mm)
Compliance
Country of originSerbia
RoHSCompliant
Additional specifications
Input voltage range2.4V to 5.5V
Informazioni per l'ordine
Codice articolo (SKU)MIKROE-2676
ProduttoreMikroelektronika d.o.o.
EAN8606018710867
Garanzia12 months
Peso di spedizione0.021 kg
  • 1 × LED Driver Click Board™

Contattaci per confermare il contenuto completo della confezione.

Domande ai nostri ingegneri

Domande e risposte

No questions have been asked about this product yet. Ask our engineers below and we'll reply by email.

Non trovi la risposta? Chiedi ai nostri ingegneri.

Fai una domanda

Ask Our Engineers About This Product

Your question goes to the Debug Store technical team. We answer by email, and useful questions may be added to this page without your name or email address.

We reply within 24 hours.