How To Use Tag-Connect Cables With The Generic Debugger

Most debuggers end in one of a handful of standard ribbon connectors, and Tag-Connect makes a cable for each. Match the cable to the connector on your debugger, then put the matching Tag-Connect footprint on your board in place of a header.

In short: a 10-pin 0.05 in Cortex debug connector takes a TC2030-CTX (SWD) or TC2050-IDC-050-ALL (JTAG and SWD). A 20-pin 0.05 in Cortex connector takes the -20 versions. A 20-pin 0.1 in ARM JTAG connector needs the TC2050-ARM2010 or ARM20-CTX adapter. Plain 0.1 in ribbon headers take TC2030-IDC (6-pin), TC2050-IDC (10-pin) or TC2070-IDC (14-pin).

Cortex 10-Pin (0.05 in, MIPI-10)

Use Legged No-legs
SWD, 6-pin footprint TC2030-CTX (legged or NL)
JTAG and SWD, 10-pin footprint TC2050-IDC-050-ALL (legged or NL)

Use the -ALL version if you need all 10 pins connected. The standard TC2050-IDC-050 leaves pins 5 and 9 unconnected. The Atmel-ICE numbers its Cortex connector the other way round, so a standard cable would short its power: use the reversed Cortex 10 cable (the -LEMTA version of the Tag-Connect cable) instead. The TC2030-ICESPI is for the Atmel-ICE AVR port.

Cortex 20-Pin (0.05 in, MIPI-20)

Use Cable
SWD TC2030-CTX-20 (legged or NL)
JTAG and SWD (pins 1 to 10) TC2050-IDC-050-ALL-20 (legged or NL)
SWD plus ETM trace TC2030-CTX-ETM

The 0.05 in 20-pin connector won't fit a traditional 20-pin 0.1 in header.

ARM 20-Pin (0.1 in)

For full JTAG, use the TC2050-ARM2010 adapter with a TC2050-IDC cable. For SWD only, use the ARM20-CTX adapter with a TC2030-IDC cable. Choose the -M version of either adapter when your debugger ends in a female ribbon socket.

Plain 0.1 in and 0.05 in Ribbon Headers

Debugger connector Tag-Connect cable
6-pin 0.1 in TC2030-IDC / -NL
10-pin 0.1 in TC2050-IDC / -NL; male versions TC2050-IDC-M / -NL-M
14-pin 0.1 in TC2070-IDC / -NL
14-pin 2 mm TC2070-IDC-2MM / -NL-2MM
6, 10 or 14-pin 0.05 in TC2030-IDC-050, TC2050-IDC-050-ALL, TC2070-IDC-050
20-pin 0.1 in, split into two 10-pin cables TC2050-2X10 with two TC2050-IDC

Legged or No-Legs?

Legged cables clip into the board, are more robust, and stay put while you debug. No-legs cables use a smaller footprint and are held by hand or by a TC2030-CLIP, or TC2050-CLIP retainer. Tag-Connect rates the spring pins for over 100,000 operations.

Frequently Asked Questions

Which Tag-Connect cable fits a 10-pin Cortex debug connector?

TC2030-CTX for SWD on a 6-pin footprint, or TC2050-IDC-050-ALL for JTAG and SWD on a 10-pin footprint.

Why does the Atmel-ICE need a different cable?

Its Cortex connector is numbered in reverse. A standard Cortex cable would connect power to the wrong pins, so use the reversed Cortex 10 cable (-LEMTA). The TC2030-ICESPI is for the Atmel-ICE AVR port, not its Cortex connector.

Related Guides

Sources

Last reviewed 22 November 2026 by The Debug Store, supplier of Tag-Connect cables.