
Caractéristiques principales
Overview
The Microchip LVP Adapter provides debug and programming connections between a J-Link or Flasher and Microchip PIC32 series target hardware, in low-voltage programming (LVP) mode only. It adapts the standard 0.1" 20-pin target connector to the 6-pin modular debug connector specified by Microchip, with optional solder-on positions for a 14-pin MIPS debug header and a 6-pin PICkit connector.
The SEGGER Microchip LVP Adapter (part number 8.06.09) provides debug and programming connections between a J-Link or Flasher and Microchip PIC32-series target hardware, in low-voltage programming (LVP) mode only. It adapts the standard 0.1" 20-pin target connector to Microchip's 6-pin modular debug connector, with optional solder-on positions for a 14-pin MIPS debug header and a 6-pin PICkit connector. It suits PIC32 firmware bring-up and production programming with SEGGER tools.
Modular, MIPS and PICkit Target Connections
The main target connection is the modular debug connector specified by Microchip, used with the supplied modular cable. SEGGER notes that the supplied modular cable inverts the pin order, as shown in its pinout. Two further connectors can be fitted by the customer: a 14-pin dual-row MIPS debug header and a 6-pin single-row PICkit connector. On the probe side the adapter plugs into the standard J-Link 20-pin 0.1" connector found on most J-Link models, and into the same connector on Flasher. Probe-side pin assignments are in our SEGGER J-Link 20-pin connector pinout guide.
Low-Voltage Programming Only
The adapter supports LVP mode only. The modular connector carries #MCLR, VDD, GND, DIO/PGD and CLK/PGC, with pin 6 not connected.
Compatible SEGGER Probes and Programmers
SEGGER lists the adapter for Flasher PRO, Flasher PRO XL, Flasher Compact and Flasher Portable PLUS, and for J-Link PRO PoE, J-Link PRO, J-Link ULTRA+, J-Link WiFi, J-Link PLUS Classic and Compact, and J-Link BASE Classic and Compact.
Specifications
| Part number | 8.06.09 |
|---|---|
| Probe side | J-Link/Flasher 20-pin, 0.1" (2.54mm) |
| Target side | 6-pin modular debug connector as specified by Microchip (RJ12 on SEGGER's product page, RJ11 in its price list); optional 14-pin dual-row MIPS header and 6-pin single-row PICkit connector (customer-fitted) |
| Programming mode | LVP (low-voltage programming) only |
| Modular connector pinout | 1 #MCLR; 2 VDD; 3 GND; 4 DIO/PGD/RB7; 5 CLK/PGC/RB6; 6 NC |
| Target devices | Microchip PIC32 series |
| Compatible Flasher models | Flasher PRO, PRO XL, Compact, Portable PLUS |
| Compatible J-Link models | J-Link PRO PoE, PRO, ULTRA+, WiFi, PLUS Classic, PLUS Compact, BASE Classic, BASE Compact |
What's Included
- Microchip LVP Adapter
- 6-pin RJ11 modular connector cable
Limitations
- LVP mode only; targets that need high-voltage programming are not supported.
- The MIPS and PICkit connectors are not fitted; you solder them on if you need them.
- Check your device in SEGGER's Knowledge Base before ordering. For PIC32MZ, for example, SEGGER lists ICSP programming support on Flasher but not on J-Link.
Microchip LVP Adapter Compared with Related Adapters
| Adapter | Target devices | Target connector | Price ex VAT |
|---|---|---|---|
| Microchip LVP Adapter (this product) | Microchip PIC32 series | 6-pin modular; optional MIPS 14-pin and PICkit 6-pin | £59 |
| Microchip 2-Wire JTAG TDI Adapter | Microchip IS208x series | 6-pin single-row 0.1" | £66 |
| AVR SPI Adapter | AVR SPI targets | 6-pin 0.1", 6-pin 0.05" or 10-pin 0.1"; 5V or 3.3V target supply | £66 |
Order the Microchip LVP Adapter for £59 ex VAT. Check your PIC32 part against SEGGER's supported devices list, or ask us for a formal quotation. See the full range in our SEGGER debug probes collection.
Last reviewed 16/11/2026.
| General | |
|---|---|
| Part number | 8.06.09 |
| Probe side | J-Link/Flasher 20-pin, 0.1" (2.54mm) |
| Programming mode | LVP (low-voltage programming) only |
| Host and Target Interface | |
| Target side | 6-pin modular debug connector as specified by Microchip (RJ12 on SEGGER's product page, RJ11 in its price list); optional 14-pin dual-row MIPS header and 6-pin single-row PICkit connector (customer-fitted) |
| Modular connector pinout | 1 #MCLR; 2 VDD; 3 GND; 4 DIO/PGD/RB7; 5 CLK/PGC/RB6; 6 NC |
| Target devices | Microchip PIC32 series |
| Software and Compatibility | |
| Compatible Flasher models | Flasher PRO, PRO XL, Compact, Portable PLUS |
| Compatible J-Link models | J-Link PRO PoE, PRO, ULTRA+, WiFi, PLUS Classic, PLUS Compact, BASE Classic, BASE Compact |
| Ordering information | |
| Part number (SKU) | 8.06.09 |
| Manufacturer | SEGGER Microcontroller GmbH |
| EAN | 5055383603640 |
| Warranty | 12 months |
| Shipping weight | 0.1 kg |
- 1 ×Microchip LVP adapter
- 1 ×6-pin RJ11 modular connector cable
Questions et réponses
-
Does the Adapter Support High-Voltage Programming?
No. SEGGER states that it supports LVP mode only.
-
Why Does the Cable Pinout Look Reversed?
SEGGER notes that the modular cable it supplies inverts the pin order, as shown in its published pinout. Keep that in mind when checking signals at the target end.
-
Can I Connect to a MIPS 14-Pin or PICkit Header?
Yes, once you fit the connector. Both are optional, customer-solderable positions on the adapter: a 14-pin dual-row MIPS debug header and a 6-pin single-row PICkit connector.
No questions match your search.