Comment utiliser les câbles Tag-Connect avec le débogueur générique
Most debuggers end in one of a handful of standard ribbon connectors, and Tag-Connect makes a cable for each. Match the cable to the connector on your debugger, then put the matching Tag-Connect footprint on your board in place of a header.
In short: a 10-pin 0.05 in Cortex debug connector takes a TC2030-CTX (SWD) or TC2050-IDC-050-ALL (JTAG and SWD). A 20-pin 0.05 in Cortex connector takes the -20 versions. A 20-pin 0.1 in ARM JTAG connector needs the TC2050-ARM2010 or ARM20-CTX adapter. Plain 0.1 in ribbon headers take TC2030-IDC (6-pin), TC2050-IDC (10-pin) or TC2070-IDC (14-pin).
Cortex 10-Pin (0.05 in, MIPI-10)
| Use | Legged | No-legs |
|---|---|---|
| SWD, 6-pin footprint | TC2030-CTX (legged or NL) | |
| JTAG and SWD, 10-pin footprint | TC2050-IDC-050-ALL (legged or NL) | |
Use the -ALL version if you need all 10 pins connected. The standard TC2050-IDC-050 leaves pins 5 and 9 unconnected. The Atmel-ICE numbers its Cortex connector the other way round, so a standard cable would short its power: use the reversed Cortex 10 cable (the -LEMTA version of the Tag-Connect cable) instead. The TC2030-ICESPI is for the Atmel-ICE AVR port.
Cortex 20-Pin (0.05 in, MIPI-20)
| Use | Cable |
|---|---|
| SWD | TC2030-CTX-20 (legged or NL) |
| JTAG and SWD (pins 1 to 10) | TC2050-IDC-050-ALL-20 (legged or NL) |
| SWD plus ETM trace | TC2030-CTX-ETM |
The 0.05 in 20-pin connector won't fit a traditional 20-pin 0.1 in header.
ARM 20-Pin (0.1 in)
For full JTAG, use the TC2050-ARM2010 adapter with a TC2050-IDC cable. For SWD only, use the ARM20-CTX adapter with a TC2030-IDC cable. Choose the -M version of either adapter when your debugger ends in a female ribbon socket.
Plain 0.1 in and 0.05 in Ribbon Headers
| Debugger connector | Tag-Connect cable |
|---|---|
| 6-pin 0.1 in | TC2030-IDC / -NL |
| 10-pin 0.1 in | TC2050-IDC / -NL; male versions TC2050-IDC-M / -NL-M |
| 14-pin 0.1 in | TC2070-IDC / -NL |
| 14-pin 2 mm | TC2070-IDC-2MM / -NL-2MM |
| 6, 10 or 14-pin 0.05 in | TC2030-IDC-050, TC2050-IDC-050-ALL, TC2070-IDC-050 |
| 20-pin 0.1 in, split into two 10-pin cables | TC2050-2X10 with two TC2050-IDC |
Legged or No-Legs?
Legged cables clip into the board, are more robust, and stay put while you debug. No-legs cables use a smaller footprint and are held by hand or by a TC2030-CLIP, or TC2050-CLIP retainer. Tag-Connect rates the spring pins for over 100,000 operations.
Frequently Asked Questions
Which Tag-Connect cable fits a 10-pin Cortex debug connector?
TC2030-CTX for SWD on a 6-pin footprint, or TC2050-IDC-050-ALL for JTAG and SWD on a 10-pin footprint.
Why does the Atmel-ICE need a different cable?
Its Cortex connector is numbered in reverse. A standard Cortex cable would connect power to the wrong pins, so use the reversed Cortex 10 cable (-LEMTA). The TC2030-ICESPI is for the Atmel-ICE AVR port, not its Cortex connector.
Related Guides
Sources
- Tag-Connect: Cortex-10 / MIPI-10 generic
- Tag-Connect: Cortex-20 / MIPI-20 generic
- Tag-Connect: IDC cable range
Last reviewed 22 November 2026 by The Debug Store, supplier of Tag-Connect cables.