SEGGER Microcontroller GmbH
Adaptateur de raccordement SEGGER 0,1" à 50 mil 10 broches
Adaptateur de raccordement SEGGER 0,1" à 50 mil 10 broches
SKU: 8.06.28
Impossible de charger la disponibilité du service de retrait
Key Features
Overview
Why Engineers Choose The Adaptateur de raccordement SEGGER 0,1" à 50 mil 10 broches
Space Optimisation
Legacy Support
Cost Efficiency
Présentation de l'adaptateur de raccordement 50-Mil 10 broches ! Adaptation sans effort pour une connectivité transparente
Vous en avez assez de devoir composer avec des connecteurs incompatibles ? Dites adieu aux problèmes de connectivité avec notre adaptateur de patch 10 broches 50-Mil de pointe ! Conçu à la perfection, cet adaptateur s'adapte sans effort du connecteur standard 20 broches 0,1" au connecteur Cortex-M standard 10 broches 0,05". Mais ce n'est pas tout ! Il peut également être utilisé avec diverses conceptions non Cortex-M présentant un brochage non standard.
Des connexions personnalisées simplifiées
Grâce à notre adaptateur innovant, vous pouvez désormais établir des connexions et des câblages personnalisés entre les côtés 20 et 10 broches sans problème. Adoptez la liberté de personnalisation et faites ressortir vos projets ! 10 fils de liaison sont inclus.
Ne laissez pas les connecteurs incompatibles vous freiner. Entrez dans un monde de connectivité transparente et commandez dès aujourd'hui l'adaptateur de raccordement 50-Mil 10 broches !
| General Information | |
|---|---|
Product Type |
Adaptateur
|
Part Number (SKU) |
8.06.28
|
Manufacturer |
|
| Physical and Mechanical | |
Weight |
0.02 kg
|
| Other | |
Warranty |
|
HS Code Customs Tariff code
|
|
EAN |
5055383614400
|
Frequently Asked Questions
Have a Question?
-
How does this compare to Tag-Connect solutions for space-saving
While Tag-Connect eliminates connectors entirely using spring pins, this adapter provides a more permanent connection solution with standard connectors that many engineers prefer for reliability.
-
What connectors are compatible on the target side?
The 10-pin side uses standard 0.05" (1.27mm) pitch connectors. Compatible target connectors include Samtec FTSH series and equivalent 2x5 0.05" shrouded headers.
-
Does this work with automotive-grade debugging applications?
Yes, the adapter meets professional standards for automotive and industrial applications. It's commonly used in ECU programming and embedded automotive development workflows.
-
Can this adapter handle 3.3V and 5V target voltages?
The adapter is voltage-transparent and works with any target voltage supported by your debug probe. Most modern applications use 3.3V, but 1.8V and 5V targets are also supported.
-
What's the maximum cable length I can use with this adapter?
The included ribbon cable is optimised for signal integrity. For longer connections, keep cables under 30cm for reliable high-speed debugging to maintain signal quality.
-
Is this compatible with SWD (Serial Wire Debug) interface?
Yes, the adapter supports both JTAG and SWD protocols when used with compatible debug probes. SWD requires only 4 connections: VCC, GND, SWCLK, and SWDIO.
-
How do I wire custom pinouts using the jumper wires?
Remove the standard ribbon cable and use the individual jumper wires to connect pins according to your target's specific pinout. The adapter provides clearly marked connection points for both the 20-pin and 10-pin sides.
-
What's included in the package?
The complete package includes the adapter board, 10 individual jumper wires for custom connections, and a 0.05" 10-pin ribbon cable. No additional cables or components are required.
-
Can I use this adapter with non-SEGGER debug probes?
Yes, any debug probe with a standard 20-pin 0.1" JTAG connector can work with this adapter. It's commonly used with ST-LINK, P&E Micro, and other industry-standard debuggers.
-
What's the difference between this adapter and SEGGER's other Cortex-M adapters?
This patch adapter uniquely includes jumper wires for custom pin mapping, while standard adapters like the 9-Pin and 19-Pin Cortex-M adapters have fixed pinouts. The patch adapter works with both standard Cortex-M and non-standard design