Atténuateur Picotest J2140A
Atténuateur Picotest J2140A
Key Features
- Peut être mis en cascade pour une plus grande atténuation
- Améliorer le bruit de fond ou assurer la mesure de petits signaux
- 50Ω impedance for seamless integration
- SMA connectors ensure reliable connections
- Compact aluminium housing: 25.4 x 25.4 x 16.8 mm
- High power rating: 2W CW, 100W peak (1µs pulse)
- Ideal for oscilloscope and spectrum analyser measurements
Overview
L' atténuateur Picotest J2140A est utile pour modifier la plage dynamique des mesures et pour modifier le niveau du signal de la source du signal de l'oscillateur lors de l'utilisation d'un analyseur de réseau vectoriel.There are two common uses for attenuators when used in conjunction with the network analyzer. One is to attenuate the oscillator source signal. While this may seem odd, one of the most common errors in analyzer measurements is using a source signal that is too large. Even though the analyzer allows setting of the signal output amplitude, the lowest setting is often too high to allow an accurate small-signal measurement to be made. The correct amplitude is the smallest amplitude that exceeds the noise floor.
Attenuators are also useful for improving the dynamic range of the measurement. In some cases, as in measuring the open loop gain of an opamp as one example, the low frequency loop gain will be extremely large (100dB or more is not uncommon). Attenuating the output signal increases the effective range of the measurement.
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.