Picotest
Générateur de formes d'ondes Picotest G5100A avec AGC
Générateur de formes d'ondes Picotest G5100A avec AGC
Impossible de charger la disponibilité du service de retrait
Key Features
- 50MHz bandwidth with 14-bit resolution for high-precision waveform generation
- 125 MSa/s sampling rate enables creation of complex, detailed waveforms
- Dual-channel output for simultaneous generation of different signals
- 10 standard waveforms plus user-defined arbitrary waveforms for maximum flexibility
- 16-bit digital pattern output for comprehensive digital circuit testing
- Extensive modulation capabilities including AM, FM, PM, FSK, and PWM
- USB and GPIB interfaces for seamless integration with measurement systems
Overview
Le générateur de fonctions/formes d'ondes arbitraires PicoTest G5100A 50 MHz peut créer des ondes sinusoïdales stables, précises, propres et à faible distorsion en utilisant la technologie DDS (synthèse numérique directe).
Le générateur de fonctions/formes d'ondes arbitraires 50 MHz compatible classe C G5100A LXI utilise la technologie DDS (Direct Digital Synthesis). Par rapport à la concurrence, le G5100A offre des performances de fréquence plus élevées, des temps de montée et de descente plus rapides, une mémoire plus grande (256 Ko x 14 bits), un générateur de motifs numériques 16 bits, une synchronisation standard de 10 MHz et une meilleure stabilité.
Features
- 50 MHz Sine, 25 MHz Square & 10 MHz arbitrary Waveforms
- 14-bit, 125 MSa/s, 256 K-point Arbitrary Waveform
- Pulse, Ramp, Triangle, Noise & DC Waveforms
- Linear & Logarithmic Sweeps & Burst Operation
- AM, FM, PM (PSK), FSK & PWM Modulation Types
- Amplitude Range, 20 mVpp to 20 Vpp into Open Circuit
- Remote Control via USB, LAN or Opt. GPIB
- Graph Mode for Visual Verification of Signal Settings
- 16-bit Data Output via Pattern Out
- Free Waveform Editor Software Wavepatt®
- User Friendly Operation
Great Performance for Functions and Waveforms
The G5100A 50MHz Function / Arbitrary Waveform Generator can create stable, precise, clean and low distortion sine waves by using DDS (Direct Digital Synthesis) Technology. With fast rise and fall times up to 25 MHz for square waves and 200KHz for linear ramp waves , the G5100A also can reach users』 demand on waveforms。
Pulse Generation
The G5100A can generate variable-edge-time pulses up to 10MHz. With variable period, pulse width and amplitude the G5100A is perfectly suited to applications requiring a flexible pulse signal。
Custom Waveform Generation
The G5100A can generate complex custom waveforms. With 14-bit resolution, and 125 MSa/s sampling rate, the G5100A offers users the flexibility to create waveforms. It also allows users to store up to 5 waveforms, 4 (4 x 256K Points) in nonvolatile memory and 1 in volatile memory.
Waveform editor Wavepatt®
Picotest Waveform Editor Software Wavepatt® allows users to create, edit and download complex waveforms. In addition, users can retrieve waveforms from Agilent Oscilloscope MSO 8104 by using the Wavepatt®。
.jpg)
Graph mode
In graph mode, user can easily visual verify the signal settings. Also, user can always see the selected function on the upper left corner of display.
Data Transmission via Pattern Out
User can use Wavepatt® to creat and store 16-bit data in G5100A. The data can be transmitted via Pattern Out from G5100A rear panel as source for control.
User Friendly Operation
The front-panel operation of G5100A is simple and user friendly. Users can enter all functions with a single key or two, and use knob or numeric keypad to adjust frequency, amplitude, offset and other parameters. Otherwise, users can also directly input voltage values in Vpp, Vrms, dBm or high & low levels. Timing parameters can be entered in Hertz (Hz) or second.
Easy-to-Use Functions
Users can easily use the following functions.
Internal modulations of AM, FM, PM (PSK), FSK & PWM for waveform adjustment.
Built-in linear and logarithmic sweeps from 1ms to 500 s.
The burst mode has a selectable number of cycles per period of time.
Using remote control via USB, LAN or Opt. GPIB interface.
The programmability by SCPI commands under the remote control connection.
Precise phase adjustments and calibrations can be done from the front panel or via a PC.
Support External Frequency Input and Output
The G5100A external frequency reference allows users synchronizing to an external 10 MHz clock, to another G5100A, or any other unit which can support 10-MHz-frequency-input function。
G5100A Programming Times:
G5100A Specifications:
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.