Carte à clic DIGI POT 13
Carte à clic DIGI POT 13
Key Features:
- Canal unique, fonctionnement à alimentation unique, résolution de 256 positions, résistance nominale de 200 kΩ, interface compatible I2C, mémoire non volatile stockant les paramètres d'essuie-glace, 50 ans de conservation typique des données, et plus encore
- Basé sur le MAX5419 - potentiomètre numérique d'Analog Devices
- Peut être utilisé pour le développement de remplacements de potentiomètres mécaniques pour le marché grand public portable, le contrôle du volume, le contrôle du contraste LCD et les applications industrielles de secours sur batterie
- mikroBUS : interface I2C
Présentation du DIGI POT 13 Click Board™
Le DIGI POT 13 Click Board™ est votre solution compacte pour un contrôle précis. Avec son potentiomètre à commande numérique, cette carte complémentaire révolutionne vos projets électroniques. Dites adieu aux potentiomètres mécaniques traditionnels et adoptez la commodité et la flexibilité offertes par le DIGI POT 13 Click Board™.
Fonctionnalités avancées
Technologie de pointe
Le cœur du DIGI POT 13 Click Board™ est le MAX5419, un potentiomètre numérique non volatil à 256 prises de pointe fabriqué par Analog Devices. Découvrez le summum de la technologie des potentiomètres numériques avec cette carte remarquable.
Résistance réglable
Avec une valeur de résistance de bout en bout typique de 200 kΩ, le DIGI POT 13 Click Board™ vous permet d'affiner vos circuits avec précision. Obtenez la résistance souhaitée sans effort et optimisez vos conceptions électroniques.
Options d'alimentation polyvalentes
Conçu pour s'adapter à vos besoins, le DIGI POT 13 Click Board™ peut fonctionner de manière transparente avec des alimentations 3,3 V et 5 V. Profitez de la flexibilité de choisir la source d'alimentation qui convient aux exigences de votre projet.
Stabilité de la température
Bénéficiez de performances exceptionnelles même à des températures variables. Le DIGI POT 13 Click Board™ offre un faible coefficient de température de résistance nominale de bout en bout de 35 ppm/ºC et une valeur ratiométrique impressionnante de 5 ppm/ºC. Gardez vos circuits stables et fiables.
Applications
Le Click Board™ DIGI POT 13 est la solution idéale pour une large gamme d'applications. Que vous développiez des produits pour le marché grand public portable, que vous travailliez sur des systèmes de contrôle du volume, que vous ajustiez le contraste de l'écran LCD ou que vous conceviez des applications industrielles avec batterie de secours, ce Click board™ est fait pour vous.
Développement de logiciels simplifié
Supporté par une bibliothèque compatible mikroSDK, le DIGI POT 13 Click Board™ simplifie le développement de logiciels. Profitez des fonctions incluses qui rationalisent votre processus de codage. Dites adieu à la complexité inutile et bonjour à l'efficacité.
Prêt à l'emploi
Le DIGI POT 13 Click Board™ est livré entièrement testé et prêt à être intégré dans vos projets. Grâce à la compatibilité avec les prises mikroBUS™, vous pouvez facilement intégrer ce Click board™ dans tout système qui le prend en charge. Commencez dès aujourd'hui votre voyage vers un contrôle et une précision améliorés avec le DIGI POT 13 Click Board™.
How Does The DIGI POT 13 Click Board™ Work?
The DIGI POT 13 Click Board™ is based on the MAX5419, a 256-tap non-volatile digital potentiometer from Analog Devices. It can perform as a discrete potentiometer or variable resistor. The potentiometers consist of a resistor array with 255 fixed resistor elements in series between appropriate H and L terminals. The potentiometer wiper (W) terminal is programmable to access any one of the 256 tap points on the resistor string, with typically 325 ohms of wiper resistance and 150-250kΩ of end-to-end resistance (200kΩ typical). It also features a power-on reset circuitry that loads the wiper position from non-volatile memory at power up. The memory is guaranteed for 50 years for wiper data retention and up to 200.000 wiper store cycles.
The DIGI POT 13 Click Board™ communicates with the host MCU using the standard I2C 2-Wire interface, with a maximum clock frequency in Fast data transfer of up to 400KHz (400kbps). The I2C address can be selected via the ADDR SEL jumper with 0 selected by default. Over the I2C interface, all data can be stored in an internal 8-bit EEPROM.
This Click board™ can operate with either 3.3V or 5V logic voltage levels selected via the VCC SEL jumper. This way, both 3.3V and 5V capable MCUs can use the communication lines properly. However, the Click board™ comes equipped with a library containing easy-to-use functions and an example code that can be used, as a reference, for further development.
SPECIFICATIONS
Type | Digital potentiometer |
Applications | It can be used for the development of mechanical potentiometer replacements for the portable consumer market, volume control, LCD contrast control, and battery-backup industrial applications |
On-board modules | MAX5419 - digital potentiometer from Analog Devices |
Key Features | Single channel, single supply operation, 256-position resolution, 200kΩ nominal resistance, I2C-compatible interface, nonvolatile memory stores wiper settings, 50 years of typical data retention, and more |
Interface | I2C |
Compatibility | mikroBUS |
Click board size | M (42.9 x 25.4 mm) |
Input Voltage | 3.3V or 5V |
PINOUT DIAGRAM
This table shows how the DIGI POT 13 Click Board™ pinout corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
Notes | Pin | Pin | Notes | ||||
---|---|---|---|---|---|---|---|
NC | 1 | AN | PWM | 16 | NC | ||
NC | 2 | RST | INT | 15 | NC | ||
NC | 3 | CS | RX | 14 | NC | ||
NC | 4 | SCK | TX | 13 | NC | ||
NC | 5 | MISO | SCL | 12 | SCL | I2C Clock | |
NC | 6 | MOSI | SDA | 11 | SDA | I2C Data | |
Power Supply | 3.3V | 7 | 3.3V | 5V | 10 | 5V | Power Supply |
Ground | GND | 8 | GND | GND | 9 | GND | Ground |
ONBOARD SETTINGS AND INDICATORS
Label | Name | Default | Description |
---|---|---|---|
LD1 | PWR | - | Power LED Indicator |
JP1 | VCC SEL | Left | Logic Level Voltage Selection 3V3/5V: Left position 3V3, Right position 5V |
JP2 | ADDR SEL | Left | I2C Address Selection 0/1: Left position 0, Right position 1 |
DIGI POT 13 CLICK ELECTRICAL SPECIFICATIONS
Description | Min | Typ | Max | Unit |
---|---|---|---|---|
Supply Voltage | 3.3 | - | 5 | V |
Nominal Resistance | - | 200 | - | kΩ |
Resolution | - | 256 | - | taps |
Wiper Resistance | - | 325 | - | Ω |
Software Support
Software Support
We provide a library for the DIGI POT 13 Click Board™ as well as a demo application (example), developed using MIKROE compilers. The demo can run on all the main MIKROE development boards.
The package can be downloaded/installed directly from NECTO Studio The package Manager (recommended), downloaded from our LibStock™ or found on MikroE Github account.
Library Description
This library contains API for the DIGI POT 13 Click Board™ driver.
Key functions
-
digipot13_set_resistance
DIGI POT 13 set the resistance function. -
digipot13_set_wiper_pos
DIGI POT 13 set the wiper position function. -
digipot13_write_data
DIGI POT 13 write data function.
Example Description
This library contains API for the DIGI POT 13 Click Board™ driver. The demo application uses a digital potentiometer to change the resistance values.
void application_task ( void )
{
for ( uint8_t res_kohm = DIGIPOT13_RES_0_KOHM; res_kohm <= DIGIPOT13_RES_200_KOHM; res_kohm += DIGIPOT13_RES_50_KOHM )
{
if ( DIGIPOT13_OK == digipot13_set_resistance( &digipot13, DIGIPOT13_CFG_RES_WH, ( float ) res_kohm ) )
{
log_printf( &logger, " Resistance: %.1f kOhmrn", ( float ) res_kohm );
log_printf( &logger, " ----------------------------rn" );
Delay_ms( 5000 );
}
}
}
The full application code, and ready to use projects can be installed directly from NECTO Studio The package Manager (recommended), downloaded from our LibStock™ or found on MikroE Github account.
Other MikroE Libraries used in the example:
- MikroSDK.Board
- MikroSDK.Log
- Click.DIGIPOT13
Additional Notes and Information
This Click board™ is supported with mikroSDK - MIKROE Software Development Kit, that needs to be downloaded from the LibStock and installed for the compiler you are using to ensure proper operation of mikroSDK compliant Click board™ demo applications.
MIKROSDK
The DIGI POT 13 Click Board™ is supported with mikroSDK - MIKROE Software Development Kit, that needs to be downloaded from the LibStock and installed for the compiler you are using to ensure proper operation of mikroSDK compliant Click board™ demo applications.
Carte à clic DIGI POT 13
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.