Mikroelektronika d.o.o.
Tableau de clic Boost 7
Tableau de clic Boost 7
Impossible de charger la disponibilité du service de retrait
Key Features
- Sorties négatives et positives régulées, courant limité, rendement élevé, faible consommation d'énergie, alimentation de convertisseur sélectionnable, canaux de sortie à commande numérique, etc.
- Basé sur le BD8316GWL - convertisseur DC/DC double de Rohm Semiconductor
- Peut être utilisé pour augmenter une tension d'entrée à un niveau supérieur
- mikroBUS : interface GPIO
Overview
Boostez votre tension avec le Boost 7 Click Board™
Vous souhaitez augmenter la tension de votre charge ? Ne cherchez pas plus loin que la Boost 7 Click Board™, la carte complémentaire compacte qui offre une régulation de tension fiable pour une gamme d'applications.
Des performances puissantes, un encombrement minimal
Doté du convertisseur DC/DC double avancé BD8316GWL de Rohm Semiconductor, le Boost 7 Click Board™ est conçu pour fournir une limite de courant jusqu'à 200 mA et générer des sorties positives et négatives bien régulées de ± 3,3 V ou ± 5 V. Cela le rend idéal pour une large gamme d'applications qui nécessitent des tensions de fonctionnement à rail divisé.
Compatibilité polyvalente
La carte Boost 7 Click Board™ est compatible avec les deux rails d'alimentation mikroBUS™ et prend également en charge une alimentation externe avec une très basse tension de 2,5 V. Cela vous donne la flexibilité dont vous avez besoin pour alimenter votre charge, où que vous soyez.
Développement de logiciels simplifié
Grâce à la bibliothèque compatible mikroSDK, le développement logiciel pour Boost 7 Click Board™ n'a jamais été aussi simple. Notre bibliothèque comprend des fonctions qui simplifient le développement logiciel, pour que vous puissiez être opérationnel rapidement et facilement.
Prêt à l'emploi
La carte Boost 7 Click Board™ est entièrement testée et prête à l'emploi sur tout système équipé de la prise mikroBUS™. Alors pourquoi attendre ? Boostez votre tension et alimentez vos applications avec la carte Boost 7 Click Board™ dès aujourd'hui !How Does The Boost 7 Click Board™ Work?
The Boost 7 Click Board™ is based on the LT1945, a dual step-up and inverted DC/DC converter from Rohm Semiconductor that boosts an input voltage to a higher level required by an output load. The BD8316GWL switching regulator feature integrated N-channel FETs and power P-channel MOSFETs alongside a Soft Start feature. Each converter inside the LT1945 is designed with up to 200mA current limit generating well-regulated positive and negative outputs of ±3.3V or ±5V, making the BD8316GWL ideal for various portable applications.
As mentioned, the BD8316GWL can configure the positive and negative output voltage in the ±3.3V or ±5V range. The desired output voltage can be selected by positioning SMD jumpers labelled as V- SEL and V+ SEL to an appropriate position. It is also possible to control the activity of the output channels via two mikroBUS™ pins, SB1 and SB2 pins. These pins are routed to a default position of the AN and PWM pins of the mikroBUS™ socket. By setting these pins to a high logic state, we put the converter outputs to an active state, and regulated voltages are available at the output terminals. In the same way, setting these pins to a low logic level disables the channels.
The Boost 7 Click Board™ can operate with either 3.3V or 5V logic voltage levels selected via the VCC SEL jumper. This way, both 3.3V and 5V capable MCUs can use the communication lines properly. Additionally, there is a possibility for the BD8316GWL power supply selection via jumper labelled as VIN SEL to supply the BD8316GWL from an external power supply terminal in the range from 2.5V to 5.5V or with a selected voltage from mikroBUS™ power rails. However, the Click board™ comes equipped with a library containing easy-to-use functions and an example code that can be used, as a reference, for further development.
SPECIFICATIONS
| Type | Boost |
| Applications | Can be used to step up an input voltage to some higher level |
| On-board modules | BD8316GWL - dual DC/DC converter from Rohm Semiconductor |
| Key Features | Regulated negative and positive outputs, current-limited, high efficiency, low power consumption, selectable converter power supply, digitally-controlled output channels, and more |
| Interface | GPIO |
| Compatibility | mikroBUS |
| Click board size | M (42.9 x 25.4 mm) |
| Input Voltage | 3.3V or 5V,External |
PINOUT DIAGRAM
This table shows how the pinout of the Boost 7 Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
| Notes | Pin |  |
Pin | Notes | |||
|---|---|---|---|---|---|---|---|
| Negative Channel Control | SB1 | 1 | AN | PWM | 16 | SB2 | Positive Channel Control |
| NC | 2 | RST | INT | 15 | NC | ||
| NC | 3 | CS | RX | 14 | NC | ||
| NC | 4 | SCK | TX | 13 | NC | ||
| NC | 5 | MISO | SCL | 12 | NC | ||
| NC | 6 | MOSI | SDA | 11 | NC | ||
| Power Supply | 3.3V | 7 | 3.3V | 5V | 10 | 5V | Power Supply |
| Ground | GND | 8 | GND | GND | 9 | GND | Ground |
ONBOARD SETTINGS AND INDICATORS
| Label | Name | Default | Description |
|---|---|---|---|
| LD1 | PWR | - | Power LED Indicator |
| JP1 | V-SEL | Left | Negative Output Voltage Selection -3.3V/-5V: Left position -3.3V, Right position -5V |
| JP2 | V+SEL | Left | Positive Output Voltage Selection +3.3V/+5V: Left position +3.3V, Right position +5V |
| JP3 | VCC SEL | Left | Logic Level Voltage Selection 3V3/5V: Left position 3V3, Right position 5V |
| JP4 | VIN SEL | Right | BD8316GWL Power Supply Selection VEXT/VCC: Left position VEXT, Right position VCC |
BOOST 7 CLICK ELECTRICAL SPECIFICATIONS
| Description | Min | Typ | Max | Unit |
|---|---|---|---|---|
| Supply Voltage | 3.3 | - | 5 | V |
| External Supply Voltage | 2.5 | - | 5.5 | V |
| Positive Output Voltage | - | +3.3/+5 | - | V |
| Negative Output Voltage | - | -3.3/-5 | - | V |
Software Support
Software Support
We provide a library for the Boost 7 Click Board™ as well as a demo application (example), developed using MikroE compilers. The demo can run on all the main MikroE development boards.
The package can be downloaded/installed directly from NECTO Studio The package Manager (recommended), downloaded from our LibStock™ or found on MikroE Github account.
Library Description
This library contains API for the Boost 7 Click Board™ driver.
Key functions
-
boost7_enable_out1This function enables the OUT1 (V-) by setting the STB1 pin to high logic state. -
boost7_disable_out1This function disables the OUT1 (V-) by setting the STB1 pin to low logic state. -
boost7_enable_out2This function enables the OUT2 (V+) by setting the STB2 pin to high logic state.
Example Description
This example demonstrates the use of the Boost 7 Click Board™ by controlling the V- and V+ outputs state.
void application_task ( void )
{
log_printf( &logger, " OUT1 (V-) : ENABLEDrn" );
log_printf( &logger, " OUT2 (V+) : DISABLEDrnn" );
boost7_enable_out1 ( &boost7 );
boost7_disable_out2 ( &boost7 );
Delay_ms( 5000 );
log_printf( &logger, " OUT1 (V-) : DISABLEDrn" );
log_printf( &logger, " OUT2 (V+) : ENABLEDrnn" );
boost7_disable_out1 ( &boost7 );
boost7_enable_out2 ( &boost7 );
Delay_ms( 5000 );
}
The full application code, and ready to use projects can be installed directly from NECTO Studio The package Manager (recommended), downloaded from our LibStock™ or found on MikroE Github account.
Other MikroE Libraries used in the example:
- MikroSDK.Board
- MikroSDK.Log
- Click.Boost7
Additional Notes and Information
Depending on the development board you are using, you may need USB UART Click Board™, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. A UART terminal is available in all MikroE compilers.
MIKROSDK
The Boost 7 Click Board™ is supported with mikroSDK - MikroE Software Development Kit. To ensure proper operation of mikroSDK compliant Click board™ demo applications, mikroSDK should be downloaded from the LibStock and installed for the compiler you are using.
Software Support
Software Support
We provide a library for the Boost 7 Click Board™ as well as a demo application (example), developed using MikroE compilers. The demo can run on all the main MikroE development boards.
The package can be downloaded/installed directly from NECTO Studio The package Manager (recommended), downloaded from our LibStock™ or found on MikroE Github account.
Library Description
This library contains API for the Boost 7 Click Board™ driver.
Key functions
-
boost7_enable_out1This function enables the OUT1 (V-) by setting the STB1 pin to high logic state. -
boost7_disable_out1This function disables the OUT1 (V-) by setting the STB1 pin to low logic state. -
boost7_enable_out2This function enables the OUT2 (V+) by setting the STB2 pin to high logic state.
Example Description
This example demonstrates the use of the Boost 7 Click Board™ by controlling the V- and V+ outputs state.
void application_task ( void )
{
log_printf( &logger, " OUT1 (V-) : ENABLEDrn" );
log_printf( &logger, " OUT2 (V+) : DISABLEDrnn" );
boost7_enable_out1 ( &boost7 );
boost7_disable_out2 ( &boost7 );
Delay_ms( 5000 );
log_printf( &logger, " OUT1 (V-) : DISABLEDrn" );
log_printf( &logger, " OUT2 (V+) : ENABLEDrnn" );
boost7_disable_out1 ( &boost7 );
boost7_enable_out2 ( &boost7 );
Delay_ms( 5000 );
}
The full application code, and ready to use projects can be installed directly from NECTO Studio The package Manager (recommended), downloaded from our LibStock™ or found on MikroE Github account.
Other MikroE Libraries used in the example:
- MikroSDK.Board
- MikroSDK.Log
- Click.Boost7
Additional Notes and Information
Depending on the development board you are using, you may need USB UART Click Board™, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. A UART terminal is available in all MikroE compilers.
MIKROSDK
The Boost 7 Click Board™ is supported with mikroSDK - MikroE Software Development Kit. To ensure proper operation of mikroSDK compliant Click board™ demo applications, mikroSDK should be downloaded from the LibStock and installed for the compiler you are using.
Frequently Asked Questions
Ask a Question-
Is the Boost 7 Click Board™ ready to use?
Yes, the Boost 7 Click Board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.
-
What is the mikroSDK-compliant library for the Boost 7 Click Board™?
The Boost 7 Click Board™ is supported by a mikroSDK-compliant library, which includes functions that simplify software development.
-
What are the applications of the Boost 7 Click Board™?
The Boost 7 Click Board™ is used to step up an input voltage to some higher level required by a load, for various applications that require "split rail" operating voltages.
-
What is the voltage range of the external power supply that can be used with the Boost 7 Click Board™?
The Boost 7 Click Board™ provides the opportunity of using an external power supply with a very low voltage of 2.5V.
-
What is the current limit of each converter inside the BD8316GWL?
Each converter inside the BD8316GWL is designed with up to 200mA current limit.
-
What is the Boost 7 Click Board™?
The Boost 7 Click Board™ is an add-on board that steps up the voltage from its input (supply) to its output (load). It features the BD8316GWL, a dual DC/DC converter from Rohm Semiconductor, which is designed to generate well-regulated positive and negative outputs of ±3.3V or ±5V.