Mikroelektronika d.o.o.
Tableau de clic Accel 30
Tableau de clic Accel 30
Impossible de charger la disponibilité du service de retrait
Key Features:
- Faible consommation d'énergie, faible bruit, accélération à pleine échelle sélectionnable, interface hôte configurable, haute résolution, divers modes de fonctionnement, interruption, fréquence d'échantillonnage programmable, etc.
- Basé sur le MC3635 - capteur d'accélération triaxial numérique de MEMSIC
- Peut être utilisé pour la détection de mouvement des produits de consommation, le contrôle de l'interface utilisateur, les jeux, la compensation d'inclinaison de la boussole électronique, etc.
- mikroBUS : interfaces I2C et SPI
Présentation de l'Accel 30 Click Board™ - Votre solution ultime pour la détection de mouvement et plus encore
Vous recherchez une carte complémentaire compacte et polyvalente pour vos projets électroniques ? Ne cherchez pas plus loin que l'Accel 30 Click Board™. Avec son capteur d'accélération avancé, cette carte est la solution parfaite pour la détection de mouvement des produits grand public, le contrôle de l'interface utilisateur, les jeux, la compensation d'inclinaison de la boussole électronique et bien plus encore.
Le MC3635 : capteur d'accélération à très faible consommation et hautes performances
Au cœur de l'Accel 30 Click Board™ se trouve le MC3635, un accéléromètre 3 axes à sortie numérique intégré de MEMSIC. Ce puissant capteur offre des mesures d'accélération à pleine échelle sélectionnables dans des plages de ±2g, ±4g, ±8g, ±12g ou ±16g sur trois axes, avec une interface hôte configurable qui prend en charge les communications série SPI et I2C.
Avec ses modes de fonctionnement haute résolution et basse consommation et sa fonction d'interruption pour divers événements, le MC3635 offre une flexibilité maximale pour répondre à de multiples besoins d'utilisation. Que vous travailliez sur un produit grand public, une application de jeu ou un système électronique complexe, le MC3635 est le choix idéal pour une détection de mouvement précise et fiable.
Développement de logiciels facile avec la conformité mikroSDK
Pour faciliter encore davantage votre processus de développement logiciel, l'Accel 30 Click Board™ est pris en charge par une bibliothèque compatible mikroSDK. Cette bibliothèque comprend une gamme de fonctions qui simplifient le développement logiciel, afin que vous puissiez vous concentrer sur la création de votre application plutôt que de vous soucier des détails techniques.
Commencez dès aujourd'hui à utiliser le tableau de commande Accel 30 Click Board™ entièrement testé
L'Accel 30 Click Board™ est un produit entièrement testé, prêt à être utilisé sur n'importe quel système équipé du socket mikroBUS™. Que vous soyez un développeur professionnel ou un amateur, cette carte offre la combinaison parfaite de performances, de flexibilité et de facilité d'utilisation. Alors pourquoi attendre ? Commencez dès aujourd'hui à construire votre prochain projet électronique avec l'Accel 30 Click Board™ !
How Does The Accel 30 Click Board™ Work?
The Accel 30 Click Board™ is based on the MC3635, a highly reliable digital triaxial acceleration sensor from MEMSIC. The MC3635 is highly configurable with a programmable acceleration range of ±2g, ±4g, ±8g, ±12g, or ±16g, and an internal sample rate from 14 to 1300 samples/second. It contains a 12-bit 32-sample FIFO with a programmable watermark and can be put into several operational modes, such as Sleep/Standby/Sniff/Swake/Cwake/Trig, depending upon the desired sensing application. In addition to all these features, the MC3635 is characterized by excellent temperature stability, low noise, and low power consumption.
The Accel 30 Click Board™ allows using both I2C and SPI interfaces at a maximum frequency of 1MHz for I2C and 8MHz for SPI communication. Selection is made by positioning SMD jumpers marked COMM SEL to the appropriate position. All jumpers must be on the same side, or the Click board™ may become unresponsive. When the I2C interface is selected, the MC3635 allows the choice of its I2C slave address, using the ADDR SEL SMD jumper set to an appropriate position marked 0 and 1. In addition to communication pins, this board also possesses an additional interrupt pin, routed to the INT pin on the mikroBUS™ socket, to signal MCU that an event, such as specific tap or sample acquisition conditions, has happened.
The Accel 30 Click Board™ can only be operated with a 3.3V logic voltage level. The board must perform appropriate logic voltage level conversion before using MCUs with different logic levels. However, the Click board™ comes equipped with a library containing functions and an example code that can be used as a reference for further development.
SPECIFICATIONS
| Type | Acceleration,Motion |
| Applications | Can be used for consumer product motion sensing, user interface control, gaming, electronic compass tilt compensation, and more |
| On-board modules | MC3635 - digital triaxial acceleration sensor from MEMSIC |
| Key Features | Low power consumption, low noise, selectable full-scale acceleration, configurable host interface, high resolution, various operating modes, interrupt, programmable sample rate, and more |
| Interface | I2C,SPI |
| Compatibility | mikroBUS |
| Click board size | S (28.6 x 25.4 mm) |
| Input Voltage | 3.3V |
PINOUT DIAGRAM
This table shows how the pinout of the corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
| Notes | Pin |  |
Pin | Notes | |||
|---|---|---|---|---|---|---|---|
| NC | 1 | AN | PWM | 16 | NC | ||
| NC | 2 | RST | INT | 15 | INT | Interrupt | |
| SPI Chip Select | CS | 3 | CS | RX | 14 | NC | |
| SPI Clock | SCK | 4 | SCK | TX | 13 | NC | |
| SPI Data OUT | SDO | 5 | MISO | SCL | 12 | SCL | I2C Clock |
| SPI Data IN | SDI | 6 | MOSI | SDA | 11 | SDA | I2C Data |
| Power Supply | 3.3V | 7 | 3.3V | 5V | 10 | NC | |
| Ground | GND | 8 | GND | GND | 9 | GND | Ground |
ONBOARD SETTINGS AND INDICATORS
| Label | Name | Default | Description |
|---|---|---|---|
| LD1 | PWR | - | Power LED Indicator |
| JP1 | ADDR SEL | Right | I2C Address Selection 0/1: Left position 0, Right position 1 |
| JP2-JP4 | COMM SEL | Right | Communication Interface Selection SPI/I2C: Left position SPI, Right position I2C |
ACCEL 30 CLICK ELECTRICAL SPECIFICATIONS
| Description | Min | Typ | Max | Unit |
|---|---|---|---|---|
| Supply Voltage | - | 3.3 | - | V |
| Acceleration Range | ±2 | - | ±16 | g |
| Acceleration Resolution | 8 | 10 | 12 | bits |
| Sensitivity | 8 | - | 4096 | LSB/g |
| Sample Rate | 14 | - | 1300 | samp/sec |
Software Support
Software Support
We provide a library for the Accel 30 Click Board™ as well as a demo application (example), developed using MikroE compilers. The demo can run on all the main MikroE development boards.
The package can be downloaded/installed directly from NECTO Studio The package Manager (recommended), downloaded from our LibStock™ or found on MikroE Github account.
Library Description
This library contains API for the Accel 30 Click Board™ driver.
Key functions
-
accel30_get_axisAccel 30 get accel data function. -
accel30_set_resolution_ctrlAccel 30 set resolution control function. -
accel30_set_modeAccel 30 set operating mode function.
Example Description
This library contains API for the Accel 30 Click Board™ driver. The library initializes and defines the I2C or SPI bus drivers to write and read data from registers. The library also includes a function for reading X-axis, Y-axis, and Z-axis data.
void application_task ( void )
{
static accel30_axis_t axis;
if ( ACCEL30_OK == accel30_get_axis( &accel30, &axis ) )
{
log_printf( &logger, "tX : %d rntY : %d rntZ : %d rn", axis.x, axis.y, axis.z );
log_printf( &logger, "------------------------rn" );
}
Delay_ms( 1000 );
}
The complete application code, and ready-to-use projects can be installed directly from NECTO Studio The package Manager (recommended), downloaded from our LibStock™ or found on MikroE Github account.
Other MikroE Libraries used in the example:
- MikroSDK.Board
- MikroSDK.Log
- Click.Accel30
Additional Notes and Information
Depending on the development board you are using, you may need USB UART Click Board™, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. A UART terminal is available in all MikroE compilers.
MIKROSDK
The Accel 30 Click Board™ is supported with mikroSDK - MikroE Software Development Kit, which needs to be downloaded from the LibStock and installed for the compiler you are using to ensure proper operation of mikroSDK compliant Click board™ demo applications.
Tableau de clic Accel 30
Frequently Asked Questions
Ask a Question-
Is the Accel 30 Click Board™ ready to use out of the box?
Yes, the Accel 30 Click Board™ comes as a fully tested product, ready to be used on any system equipped with the mikroBUS™ socket. Whether you're a professional developer or a hobbyist, this board offers the perfect combination of performance, flexibility, and ease of use.
-
The MC3635 offers high-resolution, low-power operating modes and an interrupt feature for various events, providing maximum flexibility to meet multiple use case needs. This makes it an ideal choice for accurate and reliable motion sensing, whether you\'re working on a consumer product, a gaming application, or a complex electronic system.
Yes, software development is made easier with the Accel 30 Click Board™ thanks to its mikroSDK compliant library. This library includes a range of functions that simplify software development, allowing developers to focus on building their application rather than worrying about the technical details.
-
What makes the MC3635 a good choice for motion sensing?
The MC3635 offers high-resolution, low-power operating modes and an interrupt feature for various events, providing maximum flexibility to meet multiple use case needs. This makes it an ideal choice for accurate and reliable motion sensing, whether you're working on a consumer product, a gaming application, or a complex electronic system.
-
What is the MC3635?
The MC3635 is an integrated digital output 3-axis accelerometer from MEMSIC, which is the heart of the Accel 30 Click Board™. It offers selectable full-scale acceleration measurements in ranges of ±2g, ±4g, ±8g, ±12g, or ±16g in three axes, with a configurable host interface that supports both SPI and I2C serial communication.
-
What is the Accel 30 Click Board™?
The Accel 30 Click Board™ is a compact and versatile add-on board designed for electronic projects. It features an advanced acceleration sensor, making it a perfect solution for motion sensing in consumer products, user interface control, gaming, electronic compass tilt compensation, and more.