Mikroelektronika d.o.o.
Carte à clic XBee 2
Carte à clic XBee 2
Impossible de charger la disponibilité du service de retrait
Key Features:
- Technologie de pointe, pré-certifiée, flexibilité, fréquences et protocoles sans fil multiples, fonctions de sécurité, haute programmabilité, et plus encore
- Basé sur le module radio Zigbee 3.0 XB3-24Z8UM - Digi XBee® 3 offrant une connectivité sans fil aux points terminaux de Digi International
- Peut être utilisé pour de vastes applications d'énergie intelligente, des alarmes et de la sécurité sans fil, l'automatisation des bâtiments et autres
- mikroBUS : interfaces SPI et UART
La carte Click Board™ XBee 2 est une carte complémentaire compacte offrant une connectivité de point d'extrémité sans fil à d'autres appareils. Cette carte comprend le XB3-24Z8UM, un module émetteur-récepteur Digi XBee® 3 offrant un écosystème entièrement interopérable couvrant tous les marchés verticaux de Digi International. S'appuyant sur une technologie de pointe, le module pré-certifié Digi XBee® 3 offre la flexibilité de basculer entre plusieurs fréquences et protocoles sans fil selon les besoins (Zigbee, 802.15.4, DigiMesh® et BLE). Il peut être facilement configuré et contrôlé à partir d'une plate-forme centrale simple et est livré avec des fonctionnalités intégrées de sécurité, d'identité et de confidentialité des données Digi TrustFence® qui utilisent plus de 175 contrôles pour se protéger contre les cybermenaces nouvelles et en évolution. Cette carte Click™ convient aux applications d'énergie intelligente, aux alarmes et à la sécurité sans fil, à l'automatisation des bâtiments et autres.
La carte Click Board™ XBee 2 est supportée par une bibliothèque compatible mikroSDK, qui comprend des fonctions qui simplifient le développement logiciel. Cette carte Click Board™ est un produit entièrement testé, prêt à être utilisé sur un système équipé du socket mikroBUS™.
How Does The XBee 2 Click Board™ Work?
The XBee 2 Click Board™ is based on the XB3-24Z8UM, a Digi XBee® 3 Zigbee 3.0 transceiver module providing wireless end-point connectivity from Digi International. This module uses the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking designed for high-throughput applications requiring low latency and predictable communication timing. Building on industry-leading technology, the pre-certified XB3-24Z8UM module delivers the flexibility to switch between multiple frequencies and wireless protocols as needed (Zigbee, 802.15.4, DigiMesh®, and BLE), offering a fully interoperable ecosystem covering all vertical markets.
The XBee 2 Click Board™ comes with a configurable host interface allowing communication with MCU using the chosen interface. The XB3-24Z8UM can communicate with MCU using the UART interface with commonly used UART RX, TX, and hardware flow control pins UART CTS and RTS (Clear to Send and Ready to Send), or using the SPI interface (XBee module will work as an SPI-slave only). In the case of the SPI interface, the users can use it to configure the module and write the library by themselves. The XB3-24Z8UM also has built-in Digi TrustFence® security, identity, and data privacy features, employing more than 175 controls to protect against new and evolving cyber threats.
The XBee 2 Click Board™ is associated with many other features, such as the reset function and the possibility of visual and digital indicators. An active-low reset signal routed on the RST pin of the mikroBUS™ socket activates a hardware reset of the system, while a yellow LED indicator marked as ASSOC represents a visual indication of the module's connection to the network. If the LED is constantly on, it means that the module is not connected to the mobile network, while the case of standard flashing of the LED represents the normal operating mode.
The A/D pin routed on the INT pin of the mikroBUS™ socket represents a type of interrupt whose function can be selected by positioning an onboard SMD jumper to an appropriate position labelled as DTR or ATT. DTR position is a "Data terminal ready" function used to tell the XBee module that the host MCU is ready to communicate, while the ATT position (SPI Attention) represents an indicator for the SPI interface whenever the Xbee module has data for the host MCU. In addition, the board also has a commissioning pushbutton ,marked as COMMI which, combined with an ASSOC LED, provides various simple functions to aid in deploying devices in a network.
The XBee 2 Click Board™ can be operated only with a 3.3V logic voltage level. The board must perform appropriate logic voltage level conversion before using MCUs with different logic levels. However, the Click board™ comes equipped with a library containing functions and an example code that can be used, as a reference, for further development.
SPECIFICATIONS
| Type | ZigBee |
| Applications | Can be used for broad smart-energy applications, wireless alarms and security, building automation, and others |
| On-board modules | XB3-24Z8UM - Digi XBee® 3 Zigbee 3.0 radio module providing wireless end-point connectivity from Digi International |
| Key Features | Industry-leading technology, pre-certified, flexibility, multiple frequencies and wireless protocols, security features, high programmability, and more |
| Interface | SPI,UART |
| Compatibility | mikroBUS |
| Click board size | M (42.9 x 25.4 mm) |
| Supply Voltage | 3.3V |
PINOUT DIAGRAM
This table shows how the pinout on the XBee 2 Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
| Notes | Pin |  |
Pin | Notes | |||
|---|---|---|---|---|---|---|---|
| UART RTS | RTS | 1 | AN | PWM | 16 | CTS | UART CTS |
| Reset | RST | 2 | RST | INT | 15 | A/D | Data Ready Indicator |
| SPI Chip Select | CS | 3 | CS | RX | 14 | TX | UART TX |
| SPI Clock | SCK | 4 | SCK | TX | 13 | RX | UART RX |
| SPI Data OUT | SDO | 5 | MISO | SCL | 12 | NC | |
| SPI Data IN | SDI | 6 | MOSI | SDA | 11 | NC | |
| Power Supply | 3.3V | 7 | 3.3V | 5V | 10 | NC | |
| Ground | GND | 8 | GND | GND | 9 | GND | Ground |
ONBOARD SETTINGS AND INDICATORS
| Label | Name | Default | Description |
|---|---|---|---|
| LD1 | PWR | - | Power LED Indicator |
| LD2 | ASSOC | - | Associate LED Indicator |
| JP1 | - | Right | Data Ready Selection DTR/ATT: Left position DTR, Right position ATT |
| T1 | COMMI | - | Commissioning Button |
XBEE 2 CLICK ELECTRICAL SPECIFICATIONS
| Description | Min | Typ | Max | Unit |
|---|---|---|---|---|
| Supply Voltage | - | 3.3 | - | V |
| Frequency Range | - | 2.4 | - | GHz |
| Indoor/Urban Range | - | - | 60 | m |
| Outdoor/RF Line of Sight Range | - | - | 1200 | m |
| Data Rate | - | 250 | - | Kbps |
| Operating Temperature Range | -40 | +25 | +85 | °C |
Software Support
We provide a library for the XBee 2 Click Board™ as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
The package can be downloaded/installed directly from NECTO Studio The package Manager (recommended), downloaded from our LibStock™ or found on the MikroE Github account.
Library Description
This library contains API for XBee 2 Click driver.
Key functions
-
xbee2_get_serial_numberThis function sends a get serial number command. -
xbee2_set_device_nameThis function sets the device name (node identifier). -
xbee2_set_destination_addressThis function sets the destination address high and low bytes.
Example Description
This example demonstrates the use of the XBee 2 Click Board™ by showing the communication between the two Click Board™ boards configured in transparent mode.
void application_task ( void )
{
#ifdef DEMO_APP_TRANSMITTER
xbee2_generic_write( &xbee2, DEMO_TEXT_MESSAGE, strlen( DEMO_TEXT_MESSAGE ) );
log_printf( &logger, "%s", ( char * ) DEMO_TEXT_MESSAGE );
Delay_ms( 3000 );
#else
xbee2_process( );
if ( app_buf_len > 0 )
{
log_printf( &logger, "%s", app_buf );
xbee2_clear_app_buf( );
}
#endif
}
The complete application code and ready-to-use projects can be installed directly from NECTO Studio The package Manager (recommended), downloaded from our LibStock™ or found on the MikroE Github account.
Other MikroE Libraries used in the example:
- MikroSDK.Board
- MikroSDK.Log
- Click.XBEE2
Additional Notes and Information
Depending on the development board you are using, you may need USB UART Click Board™, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.
MIKROSDK
The XBee 2 Click Board™ is supported with mikroSDK - MikroElektronika Software Development Kit. To ensure proper operation of mikroSDK compliant Click board™ demo applications, mikroSDK should be downloaded from the LibStock and installed for the compiler you are using.
Carte à clic XBee 2
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.