Mikroelektronika d.o.o.
Planche à clic Altitude 5
Planche à clic Altitude 5
Impossible de charger la disponibilité du service de retrait
La planche à clic Altitude 5™ est une carte complémentaire compacte permettant la mesure de la pression atmosphérique à haute résolution. Cette carte est équipée du KP236, un capteur de pression atmosphérique barométrique analogique basé sur un principe capacitif d'Infineon Technologies. Le KP236 est principalement développé pour la mesure de la pression atmosphérique barométrique, mais peut également être utilisé dans d'autres domaines d'application. Sa surface est micro-usinée avec un circuit de conditionnement de signal intégré monolithique implémenté en technologie BiCMOS. La fonction de transfert calibrée convertit la pression en un signal de sortie analogique dans une plage de 40 kPa à 115 kPa. Cependant, le choix du traitement du signal appartient à l'utilisateur ; plus précisément, l'utilisateur peut traiter le signal de sortie sous forme analogique ou numérique.
La haute précision et la haute sensibilité du KP236 rendent l' Altitude 5 Click Board™ adapté aux applications automobiles avancées et aux applications industrielles et grand public.
How Does The Altitude 5 Click Board™ Work?
The Altitude 5 Click Board™ is based on the KP236, a high-resolution analog barometric air pressure sensor based on a capacitive principle from Infineon Technologies. The KP236 surface is micro-machined with a monolithic integrated signal conditioning circuit implemented in BiCMOS technology that can measure pressure in a range from 40kPa up to 115kPa with an accuracy of ±1Pa over a wide operating temperature range at the industry's lowest power. The KP236 is primarily developed for measuring barometric air pressure but can also be used in other application fields.
The pressure is detected by an array of capacitive surface micro-machined sensor cells. The sensor cell output is amplified, temperature-compensated, and linearized to obtain an output voltage proportional to the applied pressure. The transfer function for linearization is computed in the digital part of the sensor using a third-order polynomial calculation. The sensor converts pressure into an analog output signal; more precisely, the user can process the output signal in analog or digital form.
The analog output voltage of the KP236 can be converted to a digital value using MCP3221, a successive approximation A/D converter with a 12-bit resolution from Microchip, using a 2-wire I2C compatible interface, or can be sent directly to an analog pin of the mikroBUS™ socket labeled as AN. Selection can be performed by onboard SMD jumper labeled as ADC SEL to an appropriate position marked as AN and I2C. Using MCP3221 and I2C interface, data transfers at rates of up to 100kbit/s in the Standard and 400kbit/s in the Fast Mode.
Since the sensor for operation requires a 5V logic voltage level only, the Altitude 5 Click Board™ also features the PCA9306 voltage-level translator from Texas Instruments. The I2C interface bus lines are routed to the dual bidirectional voltage-level translator, allowing this Click board™ to work with both 3.3V and 5V MCUs properly.
The Altitude 5 Click Board™ can operate with both 3.3V and 5V logic voltage levels selected via the VIO SEL jumper. This way, it is allowed for both 3.3V and 5V capable MCUs to use the communication lines properly. However, the Click board™ comes equipped with a library containing easy-to-use functions and an example code that can be used, as a reference, for further development.
SPECIFICATIONS
| Type | Pressure |
| Applications | Can be used for advanced automotive applications and industrial and consumer applications |
| On-board modules | KP236 - high-resolution analog barometric air pressure sensor based on a capacitive principle from Infineon Technologies |
| Key Features | High precision pressure measurements, high accuracy, automotive qualified, wide temperature range, possibility of signal processing in analog and digital form, and more |
| Interface | Analog,I2C |
| Compatibility | mikroBUS |
| Click board size | M (42.9 x 25.4 mm) |
| Input Voltage | 3.3V or 5V |
PINOUT DIAGRAM
This table shows how the pinout on the Altitude 5 Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
| Notes | Pin |  |
Pin | Notes | |||
|---|---|---|---|---|---|---|---|
| Analog Signal | AN | 1 | AN | PWM | 16 | NC | |
| NC | 2 | RST | INT | 15 | NC | ||
| NC | 3 | CS | RX | 14 | NC | ||
| NC | 4 | SCK | TX | 13 | NC | ||
| NC | 5 | MISO | SCL | 12 | SCL | I2C Clock | |
| NC | 6 | MOSI | SDA | 11 | SDA | I2C Data | |
| Power Supply | 3.3V | 7 | 3.3V | 5V | 10 | 5V | Power Supply |
| Ground | GND | 8 | GND | GND | 9 | GND | Ground |
ONBOARD SETTINGS AND INDICATORS
| Label | Name | Default | Description |
|---|---|---|---|
| LD1 | PWR | - | Power LED Indicator |
| JP1 | VIO SEL | Left | Logic Level Voltage Selection 3V3/5V: Left position 3V3, Right position 5V |
| JP2 | ADC SEL | Right | Output Voltage A/D Selection AN/I2C: Left position AN, Right position I2C |
ALTITUDE 5 CLICK ELECTRICAL SPECIFICATIONS
| Description | Min | Typ | Max | Unit |
|---|---|---|---|---|
| Supply Voltage | 3.3 | - | 5 | V |
| Ambient Operating Pressure Range | 40 | - | 115 | kPa |
| Maximum Output Current | - | - | 1 | mA |
| Accuracy | -1 | - | 1 | kPa |
| Sensitivity | - | 53.3 | - | mV/kPa |
| Operating Temperature Range | -40 | +25 | +125 | °C |
Software Support
We provide a library for the Altitude 5 Click Board™ as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
The package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe Github account.
Library Description
This library contains API for the Altitude 5 Click Board™driver.
Key functions
-
altitude5_get_altitudeAltitude 5 get altitude function. -
altitude5_get_pressureAltitude 5 get pressure function. -
altitude5_get_adc_voltageAltitude 5 get ADC voltage function.
Example Description
This library contains API for the Altitude 5 Click Board™ driver. The demo application reads ADC value, calculate pressure and altitude.
void application_task ( void )
{
static float pressure;
static float altitude;
altitude5_get_pressure( &altitude5, &pressure );
log_printf( &logger, " Pressure : %.2f mBar rn", pressure );
Delay_ms( 100 );
altitude5_get_altitude( &altitude5, &altitude );
log_printf( &logger, " Altitude : %.2f m rn", altitude );
log_printf( &logger, "----------------------------rn" );
Delay_ms( 1000 );
}
The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe Github account.
Other Mikroe Libraries used in the example:
- MikroSDK.Board
- MikroSDK.Log
- Click.Altitude5
Additional Notes and Information
Depending on the development board you are using, you may need a USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.
MIKROSDK
The Altitude 5 Click Board™ is supported with mikroSDK - MikroElektronika Software Development Kit. To ensure proper operation of mikroSDK compliant Click board™ demo applications, mikroSDK should be downloaded from the LibStock and installed for the compiler you are using.
Planche à clic Altitude 5
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.