Mikroelektronika d.o.o.
Environnement 2 Click Board
Environnement 2 Click Board
Impossible de charger la disponibilité du service de retrait
Le Environment 2 Click Board™ est une carte complémentaire compacte contenant les meilleures solutions de détection d'humidité SHT et de qualité de l'air SGP de Sensirion. Cette carte comprend SHT40 et SGP40, un capteur d'humidité relative ultra-faible consommation de haute précision, et un capteur de température combiné à un capteur de gaz à base de MOx. Le capteur SHT40 offre une sortie numérique linéarisée, fournit une précision de température constante, jusqu'à 0,1 °C, et affiche les meilleures performances lorsqu'il fonctionne dans la plage de température et d'humidité de 5 à 60 °C et de 20 à 80 % d'humidité relative, tandis que le SGP40, un capteur de gaz numérique, dispose d'une micro-plaque chauffante à température contrôlée fournissant un signal de qualité de l'air intérieur basé sur les COV compensé en humidité. Cette Click Board™ convient à la qualité de l'air intérieur et à diverses applications liées à la température et à l'humidité.
Le tableau Environnement 2 Click Board™ est pris en charge par une bibliothèque compatible mikroSDK, qui comprend des fonctions qui simplifient le développement logiciel. Cette Click Board™ est un produit entièrement testé, prêt à être utilisé sur un système équipé du socket mikroBUS™.
How Does The Environment 2 Click Board™ Work?
The Environment 2 Click Board™ as its foundation uses the SHT40 and SGP40, a high-accuracy best-in-class SHT relative humidity, and a temperature sensor combined with MOx based gas sensor from Sensirion. The SHT40 offers reduced power consumption, improved accuracy specifications, and a fully calibrated digital I2C Fast Mode Plus interface for the fastest data transfer. It covers extended operating humidity and temperature ranges from 0 to 100%RH and from -40°C to 125°C with accuracies of ±1.8%RH and ±0.2°C. On the other side, an additional gas sensor of this combo solution, the SGP40, provides a humidity-compensated VOC-based indoor air quality signal in addition to a temperature-controlled micro hot plate.
The SHT40 shows the best performance when operated within the recommended average temperature and humidity range of 5-60°C and 20-80%RH. Long-term exposure to conditions outside recommended normal range, especially at high relative humidity, may temporarily offset the RH signal. After returning to the recommended average temperature and humidity range, the sensor will recover to within specifications by itself.
The output signal of the SGP40 is processed by Sensirion's VOC Algorithm, which automatically adapts to the environment the sensor is exposed to to translate the raw signal into a VOC Index. Sensing element and VOC Algorithm feature unmatched robustness against contaminating gases present in real-world applications enabling exceptional long-term stability and low drift, high reproducibility, and reliability.
The Environment 2 Click Board™ communicates with MCU using the standard I2C 2-Wire interface. Since both sensors for operation requires a 3.3V logic voltage level only, this Click board™ also features the PCA9306 voltage-level translator from Texas Instruments. The I2C interface bus lines are routed to the dual bidirectional voltage-level translator, allowing this Click board™ to work with both 3.3V and 5V MCUs properly.
The Environment 2 Click Board™ can operate with both 3.3V and 5V logic voltage levels selected via the VIO SEL jumper. This way, it is allowed for both 3.3V and 5V capable MCUs to properly use the I2C communication lines. However, the Click board™ comes equipped with a library containing easy-to-use functions and an example code that can be used, as a reference, for further development.
SPECIFICATIONS
| Type | Environmental |
| Applications | Can be used for indoor air quality and various temperature and humidity-related applications. |
| On-board modules | SHT40 and SGP40 - high-accuracy best-in-class SHT relative humidity, and a temperature sensor combined with MOx based gas sensor from Sensirion |
| Key Features | Low power consumption, high accuracy, covers extended operating humidity and temperature ranges, long-term stability and lifetime, and more. |
| Interface | I2C |
| Compatibility | mikroBUS |
| Click board size | M (42.9 x 25.4 mm) |
| Input Voltage | 3.3V or 5V |
PINOUT DIAGRAM
This table shows how the pinout on Environment 2 Click corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
| Notes | Pin |  |
Pin | Notes | |||
|---|---|---|---|---|---|---|---|
| NC | 1 | AN | PWM | 16 | NC | ||
| NC | 2 | RST | INT | 15 | NC | ||
| NC | 3 | CS | RX | 14 | NC | ||
| NC | 4 | SCK | TX | 13 | NC | ||
| NC | 5 | MISO | SCL | 12 | SCL | I2C Clock | |
| NC | 6 | MOSI | SDA | 11 | SDA | I2C Data | |
| Power Supply | 3.3V | 7 | 3.3V | 5V | 10 | 5V | Power Supply |
| Ground | GND | 8 | GND | GND | 9 | GND | Ground |
ONBOARD SETTINGS AND INDICATORS
| Label | Name | Default | Description |
|---|---|---|---|
| LD1 | PWR | - | Power LED Indicator |
| JP1 | VIO SEL | Left | Logic Level Voltage Selection 3V3/5V: Left position 3V3, Right position 5V |
ENVIRONMENT 2 CLICK ELECTRICAL SPECIFICATIONS
| Description | Min | Typ | Max | Unit |
|---|---|---|---|---|
| Supply Voltage | 3.3 | - | 5 | V |
| SHT40 Temperature Accuracy | - | ±0.2 | - | °C |
| SHT40 Relative Humidity Accuracy | - | ±1.8 | - | %RH |
| SHT40 Operating Humidity Range | 0 | - | 100 | %RH |
| SGP40 Measurement Range | 0 | - | 1000 | ppm |
| SGP40 Operating Humidity Range | 0 | - | 90 | %RH |
| Operating Temperature Range | -10 | +25 | +50 | °C |
Software Support
We provide a library for the Environment 2 Click Board™ as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
The package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on the mikroE Github account.
Library Description
This library contains an API for the Environment 2 Click Board™ driver.
Key Functions
environment2_cfg_setup- Config Object Initialization function.environment2_init- Initialization function.environment2_default_cfg- Click the Default Configuration function.
Example Description
This library contains an API for the Environment 2 Click Board™ driver. The library contains drivers for measuring air quality, temperature and relative humidity.
The application is composed of three sections :
void application_init ( void ) {
log_cfg_t log_cfg; /**< Logger config object. */
environment2_cfg_t environment2_cfg; /**< Click config object. */
// Logger initialization.
LOG_MAP_USB_UART( log_cfg );
log_cfg.level = LOG_LEVEL_DEBUG;
log_cfg.baud = 115200;
log_init( &logger, &log_cfg );
log_printf( &logger, "rn Application Initrn" );
// Click initialization.
environment2_cfg_setup( &environment2_cfg );
ENVIRONMENT2_MAP_MIKROBUS( environment2_cfg, MIKROBUS_1 );
err_t init_flag = environment2_init( &environment2, &environment2_cfg );
if ( init_flag == I2C_MASTER_ERROR ) {
log_error( &logger, " Application Init Error. " );
log_printf( &logger, " Please, run program again... " );
for ( ; ; );
}
log_printf( &logger, " Application Task rn" );
log_printf( &logger, "-----------------------rn" );
log_printf( &logger, " Environment 2 Click rn" );
log_printf( &logger, "-----------------------rn" );
if ( environment2_sgp40_measure_test( &environment2 ) == ENVIRONMENT2_SGP40_TEST_PASSED ) {
log_printf( &logger, " All tests passedrn" );
log_printf( &logger, " Successfullyrn" );
} else {
log_printf( &logger, " One or more tests havern" );
log_printf( &logger, " Failedrn" );
}
log_printf( &logger, "-----------------------rn" );
Delay_ms( 100 );
environment2_sgp40_heater_off( &environment2 );
Delay_ms( 100 );
}
The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on mikroE Github account.
Other mikroE Libraries used in the example:
- MikroSDK.Board
- MikroSDK.Log
- Click.Environment2
Additional Notes and Information
Depending on the development board you are using, you may need a USB UART click, USB UART 2 click or RS232 click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all MikroElektronika compilers, or any other terminal application of your choice, can be used to read the message.
MIKROSDK
The Environment 2 Click Board™ is supported with mikroSDK - MikroElektronika Software Development Kit. To ensure proper operation of mikroSDK compliant Click board™ demo applications, mikroSDK should be downloaded from the LibStock and installed for the compiler you are using.
Software Support
We provide a library for the Environment 2 Click Board™ as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
The package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on the mikroE Github account.
Library Description
This library contains an API for the Environment 2 Click Board™ driver.
Key Functions
environment2_cfg_setup- Config Object Initialization function.environment2_init- Initialization function.environment2_default_cfg- Click the Default Configuration function.
Example Description
This library contains an API for the Environment 2 Click Board™ driver. The library contains drivers for measuring air quality, temperature and relative humidity.
The application is composed of three sections :
void application_init ( void ) {
log_cfg_t log_cfg; /**< Logger config object. */
environment2_cfg_t environment2_cfg; /**< Click config object. */
// Logger initialization.
LOG_MAP_USB_UART( log_cfg );
log_cfg.level = LOG_LEVEL_DEBUG;
log_cfg.baud = 115200;
log_init( &logger, &log_cfg );
log_printf( &logger, "rn Application Initrn" );
// Click initialization.
environment2_cfg_setup( &environment2_cfg );
ENVIRONMENT2_MAP_MIKROBUS( environment2_cfg, MIKROBUS_1 );
err_t init_flag = environment2_init( &environment2, &environment2_cfg );
if ( init_flag == I2C_MASTER_ERROR ) {
log_error( &logger, " Application Init Error. " );
log_printf( &logger, " Please, run program again... " );
for ( ; ; );
}
log_printf( &logger, " Application Task rn" );
log_printf( &logger, "-----------------------rn" );
log_printf( &logger, " Environment 2 Click rn" );
log_printf( &logger, "-----------------------rn" );
if ( environment2_sgp40_measure_test( &environment2 ) == ENVIRONMENT2_SGP40_TEST_PASSED ) {
log_printf( &logger, " All tests passedrn" );
log_printf( &logger, " Successfullyrn" );
} else {
log_printf( &logger, " One or more tests havern" );
log_printf( &logger, " Failedrn" );
}
log_printf( &logger, "-----------------------rn" );
Delay_ms( 100 );
environment2_sgp40_heater_off( &environment2 );
Delay_ms( 100 );
}
The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on mikroE Github account.
Other mikroE Libraries used in the example:
- MikroSDK.Board
- MikroSDK.Log
- Click.Environment2
Additional Notes and Information
Depending on the development board you are using, you may need a USB UART click, USB UART 2 click or RS232 click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all MikroElektronika compilers, or any other terminal application of your choice, can be used to read the message.
MIKROSDK
The Environment 2 Click Board™ is supported with mikroSDK - MikroElektronika Software Development Kit. To ensure proper operation of mikroSDK compliant Click board™ demo applications, mikroSDK should be downloaded from the LibStock and installed for the compiler you are using.
Environnement 2 Click Board
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.