Mikroelektronika d.o.o.
Planche à clic Binho Nova
Planche à clic Binho Nova
Impossible de charger la disponibilité du service de retrait
Key Features:
- Adaptateur multiprotocole, prise en charge de l'interface SPI I2C et UART, broches configurables (GPIO, interruption, PWM), idéal pour les tests et la validation, et plus encore.
- Cette carte est dotée de deux connecteurs femelles 1,27 mm 2x5 adaptés à la connexion de l'adaptateur hôte USB multiprotocole Binho Nova en fonction de l'interface souhaitée, en association avec des embases d'empilage qui vous permettent de la combiner facilement avec d'autres cartes Click™ en utilisant une seule prise mikroBUS™.
- Peut être utilisé pour les tests manuels pendant le développement et le débogage du micrologiciel et pour l'automatisation des tests et de la validation du matériel.
- mikroBUS : interfaces I2C, SPI, UART, PWM, analogiques et GPIO
Le Binho Nova Click Board™ est un adaptateur qui peut être utilisé comme adaptateur multiprotocole. Cette carte comporte deux connecteurs femelles 1,27 mm 2x5 adaptés à la connexion de l'adaptateur hôte USB multiprotocole Binho Nova, en fonction de l'interface souhaitée. Ce Click Board™ est conçu pour une flexibilité ultime et permet l'utilisation de cet adaptateur avec différents protocoles de communication, tels que I2C, SPI ou UART. Il comporte cinq broches de signal, qui peuvent être utilisées comme entrée/sortie numérique, sortie PWM, interruption numérique ou entrée/sortie analogique. Outre ces connecteurs, il comporte également deux cavaliers d'alimentation qui peuvent être utilisés pour alimenter l'hôte à partir du Binho Nova. Ce Click Board™ convient aux tests manuels pendant le développement du micrologiciel, le débogage et l'automatisation des tests et de la validation du matériel.
REMARQUE : le Binho Nova Click Board™ est livré avec des embases empilables qui vous permettent de le combiner facilement avec d'autres cartes Click™ en utilisant une seule prise mikroBUS™.
How Does The Binho Nova Click Board™ work?
The Binho Nova Click Board™ was designed for ultimate flexibility with multiple ways to control and interact with it. It features two female 1.27mm 2x5 connectors suitable for connecting the Binho Nova Multi-Protocol USB Host Adapter depending on the desired interface. The connected Binho Nova Adapter is powered by its USB connection to the host PC and provides downstream power to the Binho Nova Click board™. Additionally, two power jumpers labelled as 3V3 and 5V are used to supply the host from the connected Binho Nova Adapter. It represents a perfect solution for manual testing during firmware development and debugging, automating hardware testing, and validation.
Binho Nova USB Host Adapter has 3 modes of operation: Master, Slave, and Monitor/Debug. By default, it communicates as a Master device, while the Slave device support is coming soon and will be made available to all existing devices via a firmware update. Thanks to the stacking headers that this Click board™ has, there is the possibility of connecting any Click board™ with the Binho Nova Click board™. In this way, it is possible to use the USB Host Adapter in a Mode that would monitor when the MCU communicates with additional Click while "sniffing" communications and protocols.
The Binho Nova Click Board™ can establish communication with MCU using several different communication protocols. It can serve as an SPI bus controlled device, with a frequency between 500kHz and 12MHz and with all 4 SPI modes are supported, or can serve as an I2C bus controlled device that supports clock frequencies from 100kHz up to 3.4MHz that covers all common operational modes (Standard, Full-Speed, Fast, and High-Speed). In addition to using these two communications, it also supports communication as a UART pass-through, with a maximum baud rate of 1.000.000bps for the data transfer.
Some Binho Nova connector pins can be assigned to other, related or unrelated, purposes such as GPIO, interrupt, PWM signals, or analogue input/outputs. In that manner, two onboard jumpers, labelled as AN and PWM, are used to designate which pin from the Binho Nova connector is connected to the AN pin or PWM on the mikroBUS ™ socket. The default state of AN jumper represents enabled SPI communication while optionally provides the ability to use ADC/DAC, where SPI is not active. On the other hand, with the PWM jumper, the default state is enabled I2C and UART communication, while the optional state provides PWM where the UART is disabled.
The Binho Nova Click Board™ features two enable jumpers used to supply the host from the Binho USB Host Adapter. The presence of an active power supply is visually detected by a green LED diode labelled as PWR. In the case of using the Binho USB Host Adapter in Slave or Monitoring/Debug Mode, these headers need to be removed. Only when Master Mode is used and is necessary to power the host headers should be left on the Click board™.
SPECIFICATIONS
| Type | Adapter |
| Applications | Can be used for manual testing during firmware development and debugging and automating hardware testing and validation. |
| On-board modules | This board features two female 1.27mm 2x5 connectors suitable for connecting the Binho Nova Multi-Protocol USB Host Adapter depending on the desired interface, in association with stacking headers that allow you to easily combine it with other Click boards™ by using just one mikroBUS™ socket. |
| Key Features | Multi-protocol adapter, support for SPI I2C and UART interface, configurable pins (GPIO, Interrupt, PWM), ideal for testing and validation, and more. |
| Interface | PWM,UART,Analog,GPIO,I2C,SPI |
| Compatibility | mikroBUS |
| Click board size | S (28.6 x 25.4 mm) |
| Input Voltage | 5V, 3.3V,External |
PINOUT DIAGRAM
This table shows how the pinout on the Binho Nova Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
| Notes | Pin |  |
Pin | Notes | |||
|---|---|---|---|---|---|---|---|
| CS/INT Selection | AN | 1 | AN | PWM | 16 | PWM | SDA/TX Selection |
| NC | 2 | RST | INT | 15 | INT | Interrupt | |
| SPI Chip Select | CS | 3 | CS | RX | 14 | TX | UART TX |
| SPI Clock | SCK | 4 | SCK | TX | 13 | RX | UART RX |
| SPI Data OUT | SDO | 5 | MISO | SCL | 12 | SCL | I2C Clock |
| SPI Data IN | SDI | 6 | MOSI | SDA | 11 | SDA | I2C Data |
| Power Supply | 3.3V | 7 | 3.3V | 5V | 10 | 5V | Power Supply |
| Ground | GND | 8 | GND | GND | 9 | GND | Ground |
ONBOARD SETTINGS AND INDICATORS
| Label | Name | Default | Description |
|---|---|---|---|
| LD1 | PWR | - | Power LED Indicator |
| JP1 | PWR | Left | Binho Nova I/O Signal Selection IO1/IO0: Left position IO1, Right position IO0 |
| JP2 | AN | Left | Binho Nova I/O Signal Selection IO4/IO0: Left position IO4, Right position IO0 |
| J1 | SPI | Populated | Connector for SPI/Analog Interface |
| J2 | I2C/UART | Populated | Connector for I2C/UART/PWM Interface |
| J3 | 3V3 | Unpopulated | Supply Enable Jumpers from Binho Nova Host USB Adapter |
| J4 | 5V | Unpopulated | Supply Enable Jumpers from Binho Nova Host USB Adapter |
BINHO NOVA CLICK ELECTRICAL SPECIFICATIONS
| Description | Min | Typ | Max | Unit |
|---|---|---|---|---|
| Supply Voltage | 3.3 | - | 5 | V |
| Binho USB Host Adapter Output Current | - | - | 100 | mA |
| Operating Temperature Range | 0 | +25 | +80 | °C |
Software Support
Mikroe does not provide software support for the Binho Nova Click Board™ in the form of libraries and functions but only offers its users an example code showing the proper usage. The software support is provided by Binho, so please visit Mission Control Software, which provides an easy-to-use GUI interface for your Binho Nova Multi-Protocol USB Host Adapter to get the full software support.
The example code of the Binho Nova Click Board™ is performed via UART communication and consists of a few simple steps that echo strings that are entered.
- 1. Place "Binho Nova Click" into mikroBUS™ socket 1.
- 2. Insert the "Binho USB Host Adapter" connector into the "Binho Nova Click" I2C/UART slot.
- 3. Start the "Mission Control Software" application.
- 4. Connect "Binho USB Host Adapter".
- 5. Activate UART protocol with a UART rate of 115200bps.
- 6. Send some string down the UART protocol, and if everything is in the correct order, it shall be echoed back.
Planche à clic Binho Nova
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.