Mikroelektronika d.o.o.
Tableau de clic Ambient 11
Tableau de clic Ambient 11
Impossible de charger la disponibilité du service de retrait
Overview
L' Ambient 11 Click Board™ est équipé du VEML6035, un capteur de lumière ambiante I2C à faible consommation et haute sensibilité de Vishay Semiconductors. En raison des possibilités qu'offrent ses fonctionnalités, l'Ambient 11 Click peut être utilisé comme capteur de lumière ambiante pour les appareils mobiles, l'éclairage industriel et comme commutateur optique pour les appareils et écrans grand public, informatiques et industriels.
L' Ambient 11 Click Board™ est pris en charge par une bibliothèque compatible mikroSDK, qui comprend des fonctions qui simplifient le développement logiciel. Ce Click Board™ est un produit entièrement testé, prêt à être utilisé sur un système équipé du socket mikroBUS™.
How Does The Ambient 11 Click Board™ Work?
The Ambient 11 Click Board™ is based around the VEML6035, which is a 16-bit low power, high sensitivity CMOS ambient light sensor operated via a simple I2C command. This sensor has many features that make it a perfect solution for small designs such as the Ambient 11 Click Board™. One of these features is certainly its high level of integration that allows a minimal number of external components.
The sensor offers an active interruption feature that is triggered outside of the threshold window settings eliminating loading on the host. Besides that, VEML6035 has excellent temperature compensation to maintain output stability under changing temperature and its refresh rate setting does not need an external RC low pass filter. There is a programmable shutdown mode that reduces current consumption to 0.5 μA. Operating voltage ranges from 1.7 V to 3.6 V.
VEML6035 is a cost-effective solution of the ambient light sensor with an I2C bus interface. The standard serial digital interface is easy to access "Ambient Light Signal" without complex calculation and programming by an external controller. Besides the digital output also a flexible programmable interrupt pin is available.
Given the options its elements can offer, the Ambient 11 Click Board™ can be used as an ambient light sensor for mobile devices, industrial lighting operation, and as an optical switch for consumer, computing and industrial devices and displays.
The Ambient 11 Click Board™ is designed to be operated only with a 3.3V logic level. A proper logic voltage level conversion should be performed before the Click board™ is used with MCUs with logic levels of 5V.
SPECIFICATIONS
| Type | Optical |
| Applications | Ambient light sensor for mobile devices, industrial lighting operation, and as an optical switch for consumer, computing and industrial devices and displays |
| On-board modules | VEML6035, a low power, high sensitivity, I2C ambient light sensor from Vishay Semiconductors |
| Key Features | Low stand by current consumption: typ. 0.5 μA; Integrated modules: ambient light sensor (ALS) |
| Interface | GPIO,I2C |
| Compatibility | mikroBUS |
| Click board size | S (28.6 x 25.4 mm) |
| Input Voltage | 3.3V |
PINOUT DIAGRAM
This table shows how the pinout for the Ambient 11 Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
| Notes | Pin |  |
Pin | Notes | |||
|---|---|---|---|---|---|---|---|
| NC | 1 | AN | PWM | 16 | NC | ||
| NC | 2 | RST | INT | 15 | INT | Interrupt | |
| NC | 3 | CS | RX | 14 | NC | ||
| NC | 4 | SCK | TX | 13 | NC | ||
| NC | 5 | MISO | SCL | 12 | SCL | I2C Clock | |
| NC | 6 | MOSI | SDA | 11 | SDA | I2C Data | |
| Power Supply | 3.3V | 7 | 3.3V | 5V | 10 | NC | |
| Ground | GND | 8 | GND | GND | 9 | GND | Ground |
ONBOARD SETTINGS AND INDICATORS
| Label | Name | Default | Description |
|---|---|---|---|
| LD1 | PWR | - | Power LED Indicator |
Software Support
We provide a library for the Ambient 11 Click Board™ on our LibStock page, as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Library Description
This library holds functions that can be used to write data, read raw data, read and calculate Ambiental illumination and check for interrupt occurrence.
Key Functions
void ambient11_write_data ( uint8_t wr_cmd, uint16_t wr_data )- Writes 16-bit data into register defined by the 8-bit command.uint16_t ambient11_read_data ( uint8_t wr_cmd )- Reads data from register defined by the 8-bit command.float ambient11_calc_illumination ( float typical_res )- Function is used to calculate ambient illumination.
Example Description
The application is composed of three sections :
- System Initialization - Initializes I2C module, LOG structure and sets INT pin as an input.
- Application Initialization - Initalizes I2C driver, applies low sensitiviti settings ( GAIN = 0, DG = 0, SENS = 1 and IT = 100ms ) and makes an initial log.
- Application Task - (code snippet) This example shows the capabilities of the Ambient 11 click by measuring ambient illumination and displaying calculated value via the USART terminal in lux.
void application_task ( )
{
lx_val = ambient11_calc_illumination( resolution );
FloatToStr( lx_val, log_txt );
mikrobus_logWrite( "Illumination : ", _LOG_TEXT );
mikrobus_logWrite( log_txt, _LOG_TEXT );
mikrobus_logWrite( "lx", _LOG_LINE );
mikrobus_logWrite( "-------------------------", _LOG_LINE );
Delay_ms( 2000 );
}
The full application code, and ready to use projects can be found on our LibStock page.
Other mikroE Libraries used in the example:
- I2C
- UART
- Conversion
Additional Notes and Information
Depending on the development board you are using, you may need a USB UART click, USB UART 2 click or RS232 click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all MikroElektronika compilers, or any other terminal application of your choice, can be used to read the message.
MIKROSDK
The Ambient 11 Click Board™ is supported with mikroSDK - MikroElektronika Software Development Kit. To ensure proper operation of mikroSDK compliant Click board™ demo applications, mikroSDK should be downloaded from the LibStock and installed for the compiler you are using.
Software Support
We provide a library for the Ambient 11 Click Board™ on our LibStock page, as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Library Description
This library holds functions that can be used to write data, read raw data, read and calculate Ambiental illumination and check for interrupt occurrence.
Key Functions
void ambient11_write_data ( uint8_t wr_cmd, uint16_t wr_data )- Writes 16-bit data into register defined by the 8-bit command.uint16_t ambient11_read_data ( uint8_t wr_cmd )- Reads data from register defined by the 8-bit command.float ambient11_calc_illumination ( float typical_res )- Function is used to calculate ambient illumination.
Example Description
The application is composed of three sections :
- System Initialization - Initializes I2C module, LOG structure and sets INT pin as an input.
- Application Initialization - Initalizes I2C driver, applies low sensitiviti settings ( GAIN = 0, DG = 0, SENS = 1 and IT = 100ms ) and makes an initial log.
- Application Task - (code snippet) This example shows the capabilities of the Ambient 11 click by measuring ambient illumination and displaying calculated value via the USART terminal in lux.
void application_task ( )
{
lx_val = ambient11_calc_illumination( resolution );
FloatToStr( lx_val, log_txt );
mikrobus_logWrite( "Illumination : ", _LOG_TEXT );
mikrobus_logWrite( log_txt, _LOG_TEXT );
mikrobus_logWrite( "lx", _LOG_LINE );
mikrobus_logWrite( "-------------------------", _LOG_LINE );
Delay_ms( 2000 );
}
The full application code, and ready to use projects can be found on our LibStock page.
Other mikroE Libraries used in the example:
- I2C
- UART
- Conversion
Additional Notes and Information
Depending on the development board you are using, you may need a USB UART click, USB UART 2 click or RS232 click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all MikroElektronika compilers, or any other terminal application of your choice, can be used to read the message.
MIKROSDK
The Ambient 11 Click Board™ is supported with mikroSDK - MikroElektronika Software Development Kit. To ensure proper operation of mikroSDK compliant Click board™ demo applications, mikroSDK should be downloaded from the LibStock and installed for the compiler you are using.
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.