Bouclier à clic en plumes d'Adafruit
Bouclier à clic en plumes d'Adafruit
Notre carte de protection Adafruit Feather Click Board™ avec deux prises mikroBUS en guise d'ailes prouve l'extension nécessaire de vos cartes Feather en permettant à votre projet de « voler » avec plus de 1100 Click Boards™. Vous le nommez, nous l'avons ! Ce nombre de cartes Click Board™ vous offre une sélection polyvalente de périphériques qui peuvent être retirés de l'étagère et utilisés pour le prototypage en un rien de temps.
Feather est la plateforme de développement open source standardisée d'Adafruit pour les projets IoT. Le système Feather & FeatherWing d'Adafruit se compose d'une carte de base (Feather) et de cartes d'extension (Wings). Elles sont connectées entre elles via un connecteur standardisé à 28 broches (deux rangées de connecteurs à 16 et 12 broches) et prennent en charge toutes les interfaces nécessaires à la communication avec n'importe quelle Click Board™. Veuillez visiter leur page pour plus d'informations sur les cartes Feather et les normes.
Remarque : la plinthe Feather n'est pas incluse dans l'emballage.
Create Embedded Toys
We are introducing our first Adafruit Feather to mikroBUS adapter board which will allow you to quickly make prototypes by combining more than 100 Adafruit Feather compatible baseboards with hundreds of Click boards.
Overview
The Feather is Adafruit's standardized open-source development platform for IoT projects. The Adafruit Feather & FeatherWing system consist of baseboard (Feather) and expansion boards (Wings). They are connected to each other over standardized 28-pins connector (two rows of 16-pin and 12-pin connectors) and supports all interface needed for communication with any Click board. For more information about Feather boards and standard please visit their standard page.
The Feather Click Shield with two mikroBUS sockets as wings is proving needed expansion of your Feather boards by allowing your project to "fly" with more than 750 Click boards. You name it we have it! This amount of Click boards gives you a versatile selection of peripheral devices that can be taken off the shelf and used for prototyping in no time.
Note: Feather baseboard is not included in the package.
Main features
The Feather Click Shield comes equipped with two proprietary mikroBUS™ sockets, allowing all the Click board™ devices to be interfaced with the Feather boards with no effort at all. It is enough to place the small standardized add-on board of your choice on the top of the mikroBUS™ socket - and click it in. That is why this small add-on board is called Click board™ - it just clicks!
The mikroBUS™ standard is founded and maintained by MikroElektronika company, allowing all the various Click boards™ to perfectly fit in, without any compatibility issues. Besides the power available from the Feather board itself, the Feather click shield offers an additional 5V power supply (switchable through the onboard switch), required by some of the more power demanding Click boards™. This allows interfacing with an extended range of different devices. More information about the mikroBUS™ standard can be found on the official mikroBUS™ page.
Feather click shield is designed to enable connectivity between Feather baseboards and Click boards for more easiest use. Once you plug the Feather board into the Feather click shield it will allow you access to hundreds of Click boards working with 3.3V logic. For checking which Click boards are compatible with Feather boards please open our click Shop filter and select "3.3V" and "3.3V or 5V" options.
Note: You should avoid adding Click boards with 5V logic output since these boards potentially can damage Feather base-board input pins.
Power your Inventions
When a USB type C connector is connected to the shield the PWR diode will glow Blue, at this setup, the connected Feather base-board and two mikroBUS sockets will be powered from it. Maximum overload on the mikroBUS connectors should not exceed 2A on 3.3V, and load on 5V will depend directly on the current that can supply the USB source to which this shield is connected (PC, USB hub, etc).
When a USB mini connector is connected to the Feather base-board the PWR diode will glow Green, at this setup the Feather baseboard itself will be powered and will provide power to the shield including two mikroBUS sockets. The maximum current that Feather mainboard can provide over USB cannot exceed 500mA.
When a USB type C connector is connected to the shield and a USB mini connector is connected to the Feather base-board the PWR diode will glow Cyan, at this setup the mikroBUS sockets are powered from the Type C connector and the Feather base-board is unloaded from delivering power to them. Feather baseboard is powered from its own source (USB mini) over which you can also upload programs to your board.
Feather to MikroBUS Pinout
Specifications
Type | Adapter, Shield |
Applications | IoT applications with Feather boards which require additional peripheral devices |
On-board modules | Feather connector for connecting compatible Feather boards, power part for converting 5V USB to the 3.3V |
Interface | Analog,GPIO,I2C,PWM,SPI,UART |
Compatibility | mikroBUS |
Input Voltage | 3.3V,5V |
Bouclier à clic en plumes d'Adafruit
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.