Mikroelektronika d.o.o.
Carte à clic 4G LTE-NA
Carte à clic 4G LTE-NA
Impossible de charger la disponibilité du service de retrait
La carte Click Board™ 4G LTE-NA est équipée du module cellulaire multimode LARA-R204 de u-blox. Cette version est conçue pour le marché nord-américain.
La carte est conçue pour utiliser une alimentation 5 V. Les niveaux de tension d'E/S peuvent être de 3,3 V ou 5 V. Elle communique avec le microcontrôleur cible via l'interface UART, avec des fonctionnalités supplémentaires fournies par les broches suivantes sur la ligne MikroBUS : AN, RST, CS, PWM, INT.
The 4G LTE-NA Click Board™ carries the LARA-R204 multi-mode cellular module from u-blox. The board is designed to use 5V power supply. I/O voltage levels could be 3.3V or 5V. It communicates with the target microcontroller over UART interface, with additional functionality provided by the following pins on the mikroBUSline: AN, RST, CS, PWM, INT.
LARA-R204 overview
With a range of interface options and an integrated IP stack, the modules are designed to support a wide range of data-centric applications. The unique combination of performance and flexibility make these modules ideally suited for medium speed M2M applications, such as smart energy gateways, remote access video cameras, digital signage, telehealth, and telematics.
4G LTE-NA Click Board™ overview
The board has a rich set of components to simplify development: two SMA connectors, a MicroUSB port, as well as a SIM card slot.
The LARA-R204 module specifies data rates of up to 10.3 Mb/s for Download, and 5.2 Mb/s for Upload. The network protocol stack includes support for TCP, UDP, PPP, MMS, FTP, SMTP, SMTPS, HTTP, HTTPS, PING, and SSL. It covers following LTE bands: 4, 13.Antenna interfaces - The module has two RF pins with a characteristic impedance of 50 Ω. The primary antenna pin (ANT1) supports both Tx and Rx, providing the main antenna interface, while the secondary antenna pin (ANT2) supports Rx only for the LTE Rx diversity configuration.A diversity antenna only covers the Rx frequencies, and its job is to acquire an independent sample of data. The application in which you are using the Click Board™ can then choose the receive signal it wants to use.
Free u-blox software
u-blox offers m-centre, a free evaluation software for all their cellular modules. It is an easy to use graphical interface where you can configure the module and save the changes on EPROM. You can also view and edit SIM phonebook entries, send text messages, and communicate with the wireless module using AT commands.
4G LTE explained
Simply put 4G is the fourth generation of the cellular network standard. This fourth generation does not support traditional circuit-switched telephony service, but all IP based communication such as IP telephony.If you are not familiar with cellular network standards and protocols and are not sure whether you need GSM or 3G or 4G, read our learn.mikroe.com article about 2G/3G/4G to get a better understanding.
LTE or Long Term Evolution, or 4G LTE as it is most commonly called has different categories defined. There are nine different ones so far. LARA-R204 module supports the LTE Cat 1.
Carte à clic 4G LTE-NA
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.