Mikroelektronika d.o.o.
Tableau de clic pour manomètre
Tableau de clic pour manomètre
Impossible de charger la disponibilité du service de retrait
Le Manometer Click Board™ intègre un capteur de pression en silicium piézorésistif, le HSCMAND060PA3A3 de Honeywell, un module leader du secteur avec une précision extrêmement élevée de ±0,25 % FSS BFSL.
Le Manometer Click Board™ est conçu pour fonctionner sur une alimentation de 3,3 V. Il communique avec le MCU cible via l'interface I2C.
The Manometer Click Board™ carries a piezoresistive silicon pressure sensor, the HSCMAND060PA3A3 from Honeywell, an industry-leading module with an extremely high accuracy of ±0.25%FSS BFSL. The click is designed to run on a 3.3V power supply. It communicates with the target MCU over I2C interface.
HSCMAND060PA3A3 FEATURES
The HSCMAND060PA3A3 has an industry-leading, extremely high accuracy of ±0.25%FSS BFSL. An absolute pressure range from 0 to 60 PSI makes it suitable for a variety applications. Beyond the measurement range, the sensor has a high burst pressure threshold, resulting in increased reliability.
FEATURES AND USAGE NOTES
The sensor on Manometer click is a highly reliable and robust unit. It's also fairly easy to use and implement. It requires no calibration and it compensates for environmental conditions by relying on its internal temperature sensor.
The HSC Series is calibrated over the temperature range of 0 °C to 50 °C (32 °F to 122 °F).
The temperature sensor can also be accessed independently through the I2C interface.
The barbed port accepts 4.93 mm (0.19") tubing which connects directly (no special extensions required).
SPECIFICATIONS
| Type | Pressure |
| Applications | A highly accurate pressure sensor suitable for demanding industrial applications (robotics, automotive, aircraft, HVAC, food production, engine controls, agriculture and more) |
| On-board modules | Honeywell HSCMAND060PA3A3 |
| Key Features | Industry-leading extremely high accuracy of ±0.25 %FSS BFSL. Pressure range from 0 mbar to 60 PSI |
| Interface | I2C |
| Compatibility | mikroBUS |
| Click board size | S (28.6 x 25.4 mm) |
| Input Voltage | 3.3V |
PINOUT DIAGRAM
This table shows how the pinout of the Manometer Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
| Notes | Pin |  |
Pin | Notes | |||
|---|---|---|---|---|---|---|---|
| NC | 1 | AN | PWM | 16 | NC | ||
| NC | 2 | RST | INT | 15 | NC | ||
| NC | 3 | CS | TX | 14 | NC | ||
| NC | 4 | SCK | RX | 13 | NC | ||
| NC | 5 | MISO | SCL | 12 | SCL | I2C Clock | |
| NC | 6 | MOSI | SDA | 11 | SDA | I2C Data | |
| Power supply | +3.3V | 7 | 3.3V | 5V | 10 | NC | |
| Ground | GND | 8 | GND | GND | 9 | GND | Ground |
Software Support
Code examples for the Manometer Click Board™, written for MikroElektronika hardware and compilers are available on Libstock.
CODE SNIPPET
The following code snippet shows how our library simplifies the usage of the Manometer Click Board™.
1 #include "manometer_hw.h"
2 void main()
3 {
4 float pressure, temp;
5 int count = 0;
6 TWI_Init( 100000 );
7 manometer_init( MANOMETER_ADDRESS_TYPE_3, 0, 60 );
8 pressure = manometer_get_pressure();
9 temp = manometer_get_temp( CELSIUS );
10 if( pressure > 45 && temp > 35 )
11 count++;
12 }
Software Support
Code examples for the Manometer Click Board™, written for MikroElektronika hardware and compilers are available on Libstock.
CODE SNIPPET
The following code snippet shows how our library simplifies the usage of the Manometer Click Board™.
1 #include "manometer_hw.h"
2 void main()
3 {
4 float pressure, temp;
5 int count = 0;
6 TWI_Init( 100000 );
7 manometer_init( MANOMETER_ADDRESS_TYPE_3, 0, 60 );
8 pressure = manometer_get_pressure();
9 temp = manometer_get_temp( CELSIUS );
10 if( pressure > 45 && temp > 35 )
11 count++;
12 }
Tableau de clic pour manomètre
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.