Mikroelektronika d.o.o.
Carte Clicker 2 pour STM32
Carte Clicker 2 pour STM32
Impossible de charger la disponibilité du service de retrait
Overview
Assemblez différents Click Boards™ et inventez des gadgets autonomes entièrement fonctionnels en toute simplicité à l'aide de la carte Clicker 2 Board™ pour STM32 . Cette carte Clicker 2 Board™ est une carte Click Board™ rapide et compacte à deux places équipée d'un microcontrôleur ARM Cortex-M4 32 bits STM32F407VGT6 et de deux sockets hôtes MikroBUS pour offrir à l'utilisateur des possibilités illimitées pour créer des inventions nouvelles et originales.
Le microcontrôleur est préprogrammé avec un chargeur USB HID MikroBootloader rapide. Cependant, la programmation du microcontrôleur peut également être effectuée à l'aide d'un programmateur externe MikroProg pour STM32 et du logiciel MikroProg Suite pour ARM, ou à l'aide du programmateur ST-LINK V2 et du logiciel MikroProg Suite pour ARM. Il est livré avec un circuit intégré de gestion de l'alimentation et de chargeur de batterie LTC3586-2 intégré qui fournit une alimentation électrique indépendante et stable au RTC du microcontrôleur à partir de la batterie lithium-polymère ou de l'USB, même lorsque l'utilisateur appuie sur le bouton de réinitialisation ou bascule l'interrupteur marche/arrêt.
Cette carte de poche est dotée de la même paire de plots de connexion 1x26 que les cartes mikroMedia™. Les connecteurs hôtes MikroBUS se composent de deux plots de connexion 1'.
Technical Specifications
Thousands of possibilities with click boards. With two mikroBUS™ sockets on clicker 2, you can take advantage of the huge potential of click™ boards, the constantly expanding range of over 1000 add-on boards. Blend different functionalities together and come up with new and original inventions. That's just two clicks and your project is halfway done. Go ahead and play with a few ideas right away.
Programming.To make your prototyping experience as convenient as possible, clicker 2 for STM32 is preprogrammed with a USB HID bootloader. Just download our mikroBootloader application and you're ready to upload your firmware. On-board mikroProg for STM32 connector enables programming through external programmer/debugger.
Power Management.Clicker 2 for STM32 features LTC®3586, a highly integrated power management and battery charger IC that includes a current-limited switching PowerPath manager. LTC®3586 also enables battery charging over a USB connection. You can supply power to the board with a micro USB cable provided in the package. On-board voltage regulators provide the appropriate voltage levels to each component on the board.
Powering Your Inventions
Focus on your main idea because clicker 2 will take care of the details for you: your prototype already has a power management system in place. The onboard LTC®3586-2 IC will provide 3.3V or 5V to the clicks. It turns the USB port into a charger for the li-po battery. It can also maintain an independent power supply to the MCU's RTC even when you push the RESET button or toggle the ON/OFF switch.
Processor
- STM32F407VGT6 (ARM Cortex-M4)
- 1024kB Flash, 192kB RAM
- 168MHz operation
Connectivity
- 52 programmable GPIOs
- 2 mikroBUS host sockets
- USB MINI-B connector
Expanding Your Ideas
No idea is too big for clicker 2. Let your train of thought lead you anywhere. Consider all options, explore all directions. More click boards? Additional electronics? Done and done. clicker 2 has the same pocket-size form factor and the same pair of 1x26 connection pads as mikromedia boards. This makes it compatible with mikromedia shields letting you expand your device any way you want.
HID Bootloader Inside
To make your prototyping experience as convenient as possible, clicker 2 for STM32 is preprogrammed with a USB-HID bootloader. Just download our mikroBootloader application and you're ready to upload your firmware.
Hardware Debugging
Efficiently erradicate any bugs and iron out your code until it's wrinkle free and your clicker 2 device works perfectly—use mikroProg™ for STM32®. It's a fast hardware debugger and programmer with outstanding performance. Especially when used together with our ARM® compilers.
HID Bootloader Inside
To make your prototyping experience as convenient as possible, clicker 2 for STM32 is preprogrammed with a USB-HID bootloader. Just download our mikroBootloader application and you're ready to upload your firmware.
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.