LinkBone
Multiplexeur BNC double 15 voies LinkBone
Multiplexeur BNC double 15 voies LinkBone
Impossible de charger la disponibilité du service de retrait
Key Features
- Connecteurs BNC pour entrées et sorties
- Bande passante : DC à 50 MHz
- Plage de tension : +/- 24 V, charge de 1,5 A par port
- Télécommande pour une commutation facile
- Contrôle externe via les interfaces Ethernet et RS-232
Le multiplexeur BNC double 15 voies LinkBone est une paire de multiplexeurs/commutateurs analogiques conçus pour commuter des signaux numériques et analogiques entre le port commun P et un ensemble de quinze ports A à O. L'état du commutateur de chaque port est contrôlé indépendamment par la configuration de l'utilisateur. Toutes les lignes acheminent les signaux électriques de manière bidirectionnelle entre les ports.
Cette version double du Single Switch est équipée de deux multiplexeurs pour le routage parallèle des signaux.
The LinkBone Dual 1-to-15 BNC Switch is an analogue multiplexer/switch designed for switching digital and analogue signals between common port P and a set of fifteen ports (A to O). Each port switch state is controlled by user configuration independently. All lines route electrical signals bidirectionally between ports. This means the switch can be configured as 1 to 15 or 15 to 1.
Operating Mode
The LinkBone BNC Switch can operate in one of two modes:
Single-Mode
Only one of the A to O ports can simultaneously be connected to the common port, P. The device operates as a classic analogue multiplexer/demultiplexer in this configuration.
Multi-Mode
When configured in multi-mode, there is no limit of ports connected to node P. Meaning that more than one port can be connected to port P simultaneously.
Switch Configuration
The Switch Position and Operating Mode can be changed using the following Methods:
Infrared Remote Control
The LinkBone multiplexer comes with an Infrared remote control. This makes it easy for the user to select the switch position quickly manually.
Built-in Webpage via Ethernet Interface
The LinkBone Multiplexer can also be controlled remotely from its built-in web server. This allows the switch position to be selected from anywhere in the world via the webpage or Telnet commands from automated controllers
RS-232 Interface
As an alternative, the built-in RS-232 interface can also be used, making it suitable to be connected to PLC controllers etc.
Applications
LinkBone BNC switch is a perfect choice for Test Automation Measurement. The BNC switch can be used in various applications. From video and audio to more complex signals with high amplitudes and frequencies.
Multiplexeur BNC double 15 voies LinkBone
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.