Mikroelektronika d.o.o.
Carte EasyMx PRO v7 pour MCU STM32 avec STM32F207VGT6
Carte EasyMx PRO v7 pour MCU STM32 avec STM32F207VGT6
Impossible de charger la disponibilité du service de retrait
Overview
La carte EasyMx PRO v7 pour STM32 MCU avec STM32F207VCT6 est équipée d'un microcontrôleur STM32F207VCT6 avec périphériques intégrés et constitue un excellent choix pour les débutants et les professionnels.
The STM32F207VGT6 MCU has .
- 120MHz frequency
- 1 Mbyte of Flash memory
- 128K + 4K bytes of general-purpose SRAM
- Integrated Ethernet controller
- USB 2.0 (OTG, Host, Device)
- 83 General purpose I/O pins
- 12x16-bit and 2x32-bit timers
- 3x12-bit A/D (24 channels)
- 2x12-bit D/A , 4xUSARTs, 2xUARTs
- Internal Real time clock (RTC)
- 2xI2C, 3xSPI and 2xCAN controllers
25MHz Crystal Oscillator
We carefully chose the most convenient crystal value that provides clock frequency which can be used directly, or with the PLL multipliers to create higher MCU clock value. MCU card also contains 32.768 kHz crystal oscillator which provides external clock for RTCC module.
USB Communications Lines
These two jumpers, when in USB position, connect D+ and D- lines of the on-board USB connector with PA11 and PA12 microcontroller pins. Since STM32F207VGT6 supports USB, jumpers are in USB position.
Ethernet Transceiver
MCU card contains single-chip Ethernet physical (PHY) layer transceiver which provides additional Ethernet functionality to STM32F207VGT6 controller .
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.