EasyMx PRO v7 pour carte MCU STM32 avec STM32F746VGT6
EasyMx PRO v7 pour carte MCU STM32 avec STM32F746VGT6
La carte MCU EasyMx PRO v7 pour STM32 avec STM32F746VCT6 est la carte MCU par défaut fournie avec l'EasyMx PRO v7 pour STM32. Elle contient un microcontrôleur STM32F746VCT6 avec des périphériques intégrés et constitue un excellent choix pour les débutants comme pour les professionnels.
STM32F746
Operates at 216 MHz reaching 1082 CoreMark/462 DMIPS which is the maximum theoretical performance of the Cortex-M7 core. The chip has 1 MB of Flash memory and 320 KB of RAM. It also features Ethernet, Quad SPI and more. For lowest power modes, the MCU also includes 4 KB of backup SRAM. Cortex-M7 is backward compatible with the Cortex-M4 instruction set.
25 MHz Crystal Oscillator
We carefully chose the most convenient crystal value that provides clock frequency which can be used directly, or with the PLL multipliers to create higher MCU clock value. MCU card also contains 32.768 KHz crystal oscillator which provides external clock for the RTCC module.
USB Communication Interface
These two jumpers, when in USB position, connect D+ and D- lines of the on-board USB connector with PA1 and PA12 MCU pins. Since the MCU supports USB, jumpers are in USB position.
Ethernet Transceiver
MCU card contains single-chip Ethernet physical (PHY) layer transceiver which provides additional Ethernet functionality to the microcontroller.
EasyMx PRO v7 pour carte MCU STM32 avec STM32F746VGT6
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.