Dediprog Technology Co Ltd
Émulateur Flash SPI NOR Dediprog EM100Pro-G2
Émulateur Flash SPI NOR Dediprog EM100Pro-G2
Impossible de charger la disponibilité du service de retrait
Overview
Le Dediprog EM100Pro-G2 est un émulateur Flash SPI NOR intégré à une mémoire DRAM haute vitesse pour offrir les meilleures performances de mise à jour de code. Cet outil avancé a été conçu en étroite collaboration avec les fournisseurs de Flash SPI NOR pour émuler le comportement de tous les Flash SPI NOR du marché ainsi que de la prochaine génération de Flash SPI NOR.
Il fournit aux ingénieurs un outil de développement et de test flexible pour tout projet embarqué utilisant une mémoire Flash SPI NOR externe. Il fournit des cycles de test de micrologiciel rapides et intégrés pendant le développement.
| General Information | |
|---|---|
Part Number (SKU) |
EM100Pro-G2
|
Manufacturer |
|
| Other | |
Warranty |
|
HS Code Customs Tariff code
|
|
EAN |
5055383621705
|
Benefits
- Minutes become seconds for SPI NOR Flash code update (3 seconds to update 2Gbit code)
- Save up to 1 hour every day for your development and reduce your time to market
- Debug efficiently your application through the available SPI bus with our SPI Trace, SPI Trigger, SPI Hyper Terminal for debug messages
- Develop your own application debugger via our bidirectional SPI Hyper terminal and control application from your host PC
- EM100Pro-G2 can connect with Intel motherboard by specific adaptor ISP-ADP-Intel-C (Option).
Performance (Erase+Program+Verify)
| Density | Programmer | EM100Pro-G2 Emulator |
| 8Mb | 9s | 3s |
| 16Mb | 13s | 3s |
| 32Mb | 16s | 3s |
| 64Mb | 38s | 3s |
| 128Mb | 75s | 3s |
| 256Mb | 115s | 3s |
| 512Mb | 200s | 3s |
| 1Gb | N/A | 3s |
| 2Gb | N/A | 3s |
Hardware
The EM100Pro-G2 has two 2.54mm pitch males connectors of:
- 2x2 for the Reset and Trig signals
- 2x10 for the Emulation signals
EM100Pro-G2 is designed with ISP header, through different cables/adaptors, it can connect to the PCB board directly. Please refer to Table 1 for EM100Pro-G2 2x10 header pin out.
DediProg also provides the EM100Pro-G2 ISP Cable which is used to connect the EM100Pro-G2 programmer to the 2X5 2.54mm ISP Pin Header on board, please refer to Table 2 for the EM100Pro-G2 ISP Cable 2x5 pin out.
EM100Pro-G2 ISP Header Pin Out
| 1 | NC | CS2 | 2 |
| 3 | CS1 | Vcc | 4 |
| 5 | MISO/DQ1 | Hold/DQ3 | 6 |
| 7 | Wp/DQ2 | CLK | 8 |
| 9 | GND | MOSI/DQ0 | 10 |
| 11 | 3.3V | NC | 12 |
| 13 | CTRL | NC | 14 |
| 15 | CTRL | 3.3V | 16 |
| 17 | CTRL | CTRL | 18 |
| 19 | GND | NC | 20 |
| 1 | GND | Reset | 2 |
| 3 | GND | Trig | 4 |
ISP Cable Connector Pin Out (2x5)
| 1 | NC | CS2 | 2 |
| 3 | CS1 | Vcc | 4 |
| 5 | MISO/DQ1 | Hold/DQ3 | 6 |
| 7 | Wp/DQ2 | CLK | 8 |
| 9 | GND | MOSI/DQ0 | 10 |
EM100Pro-G2 increases productivity by downloading firmware code or data into the emulator in a few seconds for density as large as 2Gb. In addition, it provides "SPI BUS Analyzer" feature by collecting all the SPI command and data on the SPI bus in order to help the debugging process.
It will speed up your firmware development and testing by eliminating the need to remove-erase-program and re-install SPI flash each time you test a code change.
If you want to stop the "program/insert/boot/remove/erase" cycle, then this is the tool for you.
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.