
Overview
The 19-Pin Cortex-M Adapter connects a J-Link or Flasher to Cortex-M target hardware for JTAG, SWD and SWO, adapting the 20-pin 0.1" JTAG connector to the 19-pin 0.05" Samtec FTSH connector defined by ARM. TRST is not connected by default and can be connected through solder bridge NR1. It also suits non-Cortex-M targets that use the same pinout.
The SEGGER 19-Pin Cortex-M Adapter (part number 8.06.00) connects a J-Link or Flasher to Cortex-M target hardware for JTAG, SWD and SWO, adapting the 20-pin 0.1" JTAG connector to the 19-pin 0.05" Samtec FTSH connector defined by ARM. TRST is not connected by default and can be connected through solder bridge NR1. SEGGER's shop lists it with a 19-pin cable, and it also suits non-Cortex-M targets that use the same pinout.
J-Link Debug on Cortex Debug+ETM Headers
SEGGER's Knowledge Base calls the 19-pin 0.05" connector the Cortex Debug+ETM connector. Boards built around it can be debugged from the standard J-Link 20-pin 0.1" connector found on most J-Link models, over JTAG or SWD with SWO, without a J-Trace on the bench. SEGGER lists it as suitable for J-Link models with the 20-pin connector, including J-Link Ultra and the Classic models. Pin assignments and adapter options are in our SEGGER J-Link 20-pin connector pinout guide.
19-Pin Connector Debug Pins
| Pin | Signal | Notes |
|---|---|---|
| 1 | VTref | Target reference voltage |
| 2 | SWDIO / TMS | SWD data or JTAG TMS |
| 3, 5, 15, 17, 19 | GND | Ground |
| 4 | SWCLK / TCK | SWD clock or JTAG TCK |
| 6 | SWO / TDO | SWO (optional for SWD) or JTAG TDO |
| 7 | n/a | Not present on this connector |
| 8 | NC / TDI | Not used in SWD; JTAG TDI |
| 9 | NC (TRST) | Connected to TRST only when NR1 is closed |
| 10 | nRESET | Active-low target reset |
| 12 to 20 (even) | TRACECLK, TRACEDATA[0] to [3] | Trace pins, used by J-Trace PRO |
Specifications
| Interfaces | JTAG, SWD, SWO |
|---|---|
| Probe side | 20-pin, 0.1" JTAG |
| Target side | 19-pin, 0.05" Samtec FTSH, as defined by ARM |
| TRST | Not connected by default; connectable via solder bridge NR1 |
| Targets | Cortex-M and compatible non-Cortex-M targets |
| Part number | 8.06.00 |
What's Included
- 19-Pin Cortex-M Adapter
- 19-pin cable
As listed in SEGGER's shop ("incl. 19-pin cable").
Limitations
- No ETM trace. SEGGER lists JTAG, SWD and SWO for this adapter; the 19-pin connector is built into all J-Trace PRO models for trace capture.
- TRST needs the NR1 solder bridge closed.
- For a 9-pin 0.05" Cortex Debug header, use the 9-Pin Cortex-M Adapter.
19-Pin Cortex-M Adapter Compared with Related Adapters
| Adapter | Target connector | Interfaces | Price ex VAT |
|---|---|---|---|
| 19-Pin Cortex-M Adapter (this product) | 19-pin, 0.05" Samtec FTSH | JTAG, SWD, SWO | £38 |
| 9-Pin Cortex-M Adapter | 9-pin, 0.05" Samtec FTSH | JTAG, SWD, SWO | £35 |
| 50-Mil 10-Pin Patch Adapter | 10-pin, 0.05" Cortex-M | Custom wiring for non-standard pinouts | £66 |
| STDC 14 Adapter | 14-pin, 0.05" defined by ST | ST targets | £60 |
Order the 19-Pin Cortex-M Adapter for £38 ex VAT, or ask us for a formal quotation. See the full range in our SEGGER debug probes collection.
Last reviewed 16/11/2026.
| General | |
|---|---|
| Probe side | 20-pin, 0.1" JTAG |
| TRST | Not connected by default; connectable via solder bridge NR1 |
| Part number | 8.06.00 |
| Host and Target Interface | |
| Interfaces | JTAG, SWD, SWO |
| Target side | 19-pin, 0.05" Samtec FTSH, as defined by ARM |
| Targets | Cortex-M and compatible non-Cortex-M targets |
| Ordering information | |
| Part number (SKU) | 8.06.00 |
| Manufacturer | SEGGER Microcontroller GmbH |
| EAN | 5055383614424 |
| Warranty | 12 months |
| Shipping weight | 0.02 kg |
- 1 ×19-Pin Cortex-M Adapter
- 1 ×19-pin cable
Preguntas y respuestas
-
Can I Capture Trace Through the 19-Pin Adapter?
No. SEGGER lists JTAG, SWD and SWO for this adapter. The trace pins on the 19-pin connector are for J-Trace PRO, which has the connector built in.
-
9-Pin or 19-Pin Cortex-M Adapter?
Match the header on your board. The 19-pin version fits the 19-pin 0.05" Cortex Debug+ETM connector; the 9-pin version fits the 9-pin 0.05" Cortex Debug connector.
No questions match your search.