Ir directamente a la información del producto
1 de 7

Mikroelektronika d.o.o.

Current 7 Click Board™

Current 7 Click Board™

SKU: MIKROE-4976

Precio habitual
£31.00 exc VAT
£37.20 inc VAT
Precio habitual £31.00 GBP Precio de oferta
£31.00 exc VAT
£37.20 inc VAT
Oferta Agotado
Los gastos de envío se calculan en la pantalla de pago.
If no stock shown above, check availability

Formas de pago

  • American Express
  • Visa
  • Mastercard
  • Maestro
  • PayPal
  • Apple Pay
  • Google Pay
  • Bank transfer
Ver todos los detalles

Descripción general

The Current 7 Click Board™ is a compact add-on board providing a precise and accurate current sensing solution. This board features the INA282, a wide common-mode range, bidirectional, high-accuracy current shunt monitor from Texas Instruments. The INA282 represents a voltage output current shunt monitor that can sense drops across shunts at common-mode voltages from –14 V to +80 V, independent of the supply voltage, which operates in a range from 2.7V up to 18V supply. The zero-drift topology enables high-precision measurements with maximum input offset voltages as low as 70μV. Also, the user is allowed to process the output signal in analog or digital form. This Click board™ delivers higher performance to industrial control and automation applications, load and power supplies monitoring, telecom equipment, and many more.

The Current 7 Click Board™ is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.

How Does The Current 7 Click Board™Work?

The Current 7 Click Board™ is based on the INA381, a high-accuracy current-sensing amplifier from Texas Instruments. This voltage output current-sensing amplifier accurately measures voltages developed across the current-sensing resistor (also known as a current-shunt resistor) at a common-mode range that extends 14V below the negative supply rail as up to 80V, allowing for either low-side or high-side current sensing. The zero-drift topology enables high-precision measurements with maximum input offset voltages as low as 70μV over the entire temperature range of –40°C to +120°C.

Current 7 click inner

The Current 7 Click Board™ possesses two ways to communicate with the MCU. The analog output signal of the INA282 can be converted to a digital value using MCP3221, a successive approximation A/D converter with a 12-bit resolution from Microchip using a 2-wire I2C compatible interface, or can be sent directly to an analog pin of the mikroBUS™ socket labelled as AN. The MCP3221 provides one single-ended input with low power consumption, a low maximum conversion current, and a Standby current of 250μA and 1μA, respectively. Data can be transferred at rates of up to 100kbit/s in the Standard and 400kbit/s in the Fast Mode. Selection can be performed by onboard SMD jumper labelled as OUT SEL, setting it to an appropriate position marked as AN and ADC.

The INA282 also allows a connection of external voltage signals on the onboard headers labelled as REF1 and REF2 for the device's reference voltage. This reference voltage determines how the output responds to certain input conditions. The configurable settings of the reference voltage control resistors, R5 and R6, allow the INA282 to be used in unidirectional and bi-directional applications. More information about these operational modes can be found in the attached datasheet.

The Current 7 Click Board™ can operate with both 3.3V and 5V logic voltage levels selected via the VCC SEL jumper. It allows for both 3.3V and 5V capable MCUs to use the communication lines properly. Additionally, there is a possibility for the INA282 power supply selection via jumper labelled as PWR SEL to supply the INA282 from an external power supply terminal in the range from 2.7V to 18V or with mikroBUS™ power rails. However, the Click board™ comes equipped with a library containing easy-to-use functions and an example code that can be used, as a reference, for further development.

SPECIFICATIONS

Type Measurements
Applications The Current 7 Click Board™ can be used for industrial control and automation applications, load and power supplies monitoring, telecom equipment, and many more
On-board modules INA381 - current-sensing amplifier from Texas Instruments
Key Features Wide input common-mode range, low power consumption, bidirectional and unidirectional current sensing, high accuracy and precision, possibility of signal processing in analog and digital form, and more
Interface Analog,I2C
Compatibility mikroBUS
Click board size M (42.9 x 25.4 mm)
Input Voltage 3.3V or 5V,External

PINOUT DIAGRAM

This table shows how the pinout of the Current 7 Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).

Notes Pin Mikrobus logo.png Pin Notes
Analog Device AN 1 AN PWM 16 NC
NC 2 RST INT 15 NC
NC 3 CS RX 14 NC
NC 4 SCK TX 13 NC
NC 5 MISO SCL 12 SCL I2C Clock
NC 6 MOSI SDA 11 SDA I2C Data
Power Supply 3.3V 7 3.3V 5V 10 5V Power Supply
Ground GND 8 GND GND 9 GND Ground

ONBOARD SETTINGS AND INDICATORS

Label Name Default Description
LD1 PWR - Power LED Indicator
JP1 VCC SEL Left Logic Level Voltage Selection 3V3/5V: Left position 3V3, Right position 5V
JP2 PWR SEL Right INA282 Power Supply Selection EXT/INT: Left position EXT, Right position INT
JP3 OUT SEL Right Output Voltage A/D Selection AN/ADC: Left position AN, Right position ADC
R5-R6 R5-R6 Populated Reference Voltage Control Resistors
J1-J2 REF1-REF2 Unpopulated External Reference Voltage Headers

CURRENT 7 CLICK ELECTRICAL SPECIFICATIONS

Description Min Typ Max Unit
Supply Voltage VCC 3.3 - 5 V
External Supply Voltage VEXT 2.7 - 18 V
Common-Mode Voltage Range -14 - +80 V
Gain - 50 - V/V
Operating Temperature Range -40 +25 +120 °C

Overview
CategoryMeasurements
ApplicationsCan be used for industrial control and automation applications, load and power supplies monitoring, telecom equipment, and many more
Key components
On-board modulesINA381 - current-sensing amplifier from Texas Instruments
Features
Key featuresWide input common-mode range, low power consumption, bidirectional and unidirectional current sensing, high accuracy and precision, possibility of signal processing in analog and digital form, and more
Interfaces
InterfaceAnalog, I2C
CompatibilitymikroBUS™
Electrical
Input voltage3.3V or 5V, External
Physical
Click board sizeM (42.9 x 25.4 mm)
Compliance
Country of originSerbia
RoHSCompliant
Información de pedido
Referencia (SKU)MIKROE-4976
FabricanteMikroelektronika d.o.o.
EAN8606027389283
Garantía12 months
Peso de envío0.02 kg
  • 1 × Current 7 Click Board™

Contacte con nosotros para confirmar el contenido completo de la caja.

Preguntas a nuestros ingenieros

Preguntas y respuestas

No questions have been asked about this product yet. Ask our engineers below and we'll reply by email.

¿No encuentra la respuesta? Pregunte a nuestros ingenieros.

Hacer una pregunta

Ask Our Engineers About This Product

Your question goes to the Debug Store technical team. We answer by email, and useful questions may be added to this page without your name or email address.

We reply within 24 hours.