Ir directamente a la información del producto
1 de 7

Mikroelektronika d.o.o.

Barometer 7 Click Board™

Barometer 7 Click Board™

SKU: MIKROE-4913

Precio habitual
£28.00 exc VAT
£33.60 inc VAT
Precio habitual £28.00 GBP Precio de oferta
£28.00 exc VAT
£33.60 inc VAT
Oferta Agotado
Los gastos de envío se calculan en la pantalla de pago.
If no stock shown above, check availability

Formas de pago

  • American Express
  • Visa
  • Mastercard
  • Maestro
  • PayPal
  • Apple Pay
  • Google Pay
  • Bank transfer
Ver todos los detalles

Descripción general

The Barometer 7 Click Board™ is a compact add-on board used to measure air pressure in a specific environment. This board features the KP264XTMA1, a high-accuracy digital barometric air pressure sensor based on a capacitive principle from Infineon Technologies. The KP264XTMA1 is surface micromachined with a monolithic integrated signal conditioning circuit implemented in BiCMOS technology that converts pressure into a 10-bit digital value and sends the information via the SPI interface. It measures pressure from 40kPa up to 115kPa with an accuracy of ±1.5kPa over a wide operating temperature range.

The Barometer 7 Click Board™ is suited for various pressure-based applications, industrial, consumer, weather stations, and many more.

How Does The Barometer 7 Click Board™ Work?

The Barometer 7 Click Board™ as its foundation uses the KP264XTMA1, a high-accuracy digital barometric air pressure sensor from Infineon Technologies, to measure air pressure in a specific environment. The sensor is individually calibrated and temperature compensated, reducing software complexity by directly reading pressure and temperature. The KP264XTMA1 provides a fast startup time of less than 10ms, measures pressure in a range from 40kPa up to 115kPa with an accuracy of ±1.5kPa, ideally suited to the harsh environmental conditions prevalent in industrial and consumer applications.

MikroElektronika MIKROE-4913 Barometer 7 Click Board with KP264XTMA1, annotated logic voltage selection

The Barometer 7 Click Board™ communicates with MCU through a standard SPI interface that enables high clock speeds up to 5MHz. The KP264XTMA1 converts pressure into a 10-bit digital value and sends the information via the SPI interface. In addition, a temperature sensor is also integrated into this chip. The 10-bit temperature information will also be transmitted via the SPI interface based on the received SPI command.

The KP264XTMA1 is fully calibrated and has a linear transfer function between the applied pressure and the digital output signal. Its unique reliability feature is the integrated diagnostic mode, which tests the sensor cells and the signal path, triggered with an SPI command.

The Barometer 7 Click Board™ can operate with both 3.3V and 5V logic voltage levels selected via the VCC SEL jumper. This way, it is allowed for both 3.3V and 5V capable MCUs to use the communication lines properly. However, the Click board™ comes equipped with a library that contains easy-to-use functions and an example code that can be used, as a reference, for further development.

SPECIFICATIONS

Type Pressure
Applications The Barometer 7 Click Board™ be used for various pressure-based applications, industrial, consumer, weather stations, and many more
On-board modules KP264XTMA1 - high-accuracy digital barometric air pressure sensor from Infineon Technologies
Key Features Low power consumption, high accuracy, integrated temperature sensor, 10-bit pressure and temperature resolution, self-diagnosis features, and more
Interface SPI
Compatibility mikroBUS
Click board size S (28.6 x 25.4 mm)
Input Voltage 3.3V or 5V

PINOUT DIAGRAM

This table shows how the pinout of the Barometer 7 Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).

Notes Pin MikroElektronika MIKROE-4913 Barometer 7 Click Board, mikroBUS label graphic in black text Pin Notes
NC 1 AN PWM 16 NC
NC 2 RST INT 15 NC
SPI Chip Select CS 3 CS RX 14 NC
SPI Clock SCK 4 SCK TX 13 NC
SPI Data OUT SDO 5 MISO SCL 12 NC
SPI Data IN SDI 6 MOSI SDA 11 NC
Power Supply 3.3V 7 3.3V 5V 10 5V Power Supply
Ground GND 8 GND GND 9 GND Ground

ONBOARD SETTINGS AND INDICATORS

Label Name Default Description
LD1 PWR - Power LED Indicator
JP1 VCC SEL Left Logic Level Voltage Selection 3V3/5V: Left position 3V3, Right position 5V

BAROMETER 7 CLICK ELECTRICAL SPECIFICATIONS

Description Min Typ Max Unit
Supply Voltage 3.3 - 5 V
Operating Pressure Range 40 - 115 kPa
Accuracy (0 - 85°C) -1.5 - +1.5 kPa
Resolution - 10 - bits
Operating Temperature Range -40 +25 +125 °C

Overview
CategoryPressure
ApplicationsCan be used for various pressure-based applications, industrial, consumer, weather stations, and many more
Key components
On-board modulesKP264XTMA1 - high-accuracy digital barometric air pressure sensor from Infineon Technologies
Features
Key featuresLow power consumption, high accuracy, integrated temperature sensor, 10-bit pressure and temperature resolution, self-diagnosis features, and more
Interfaces
InterfaceSPI
CompatibilitymikroBUS™
Electrical
Input voltage3.3V or 5V
Physical
Click board sizeS (28.6 x 25.4 mm)
Compliance
Country of originSerbia
RoHSCompliant
Información de pedido
Referencia (SKU)MIKROE-4913
FabricanteMikroelektronika d.o.o.
EAN8606027389689
Garantía12 months
Peso de envío0.02 kg
  • 1 × Barometer 7 Click Board™

Contacte con nosotros para confirmar el contenido completo de la caja.

Preguntas a nuestros ingenieros

Preguntas y respuestas

No questions have been asked about this product yet. Ask our engineers below and we'll reply by email.

¿No encuentra la respuesta? Pregunte a nuestros ingenieros.

Hacer una pregunta

Ask Our Engineers About This Product

Your question goes to the Debug Store technical team. We answer by email, and useful questions may be added to this page without your name or email address.

We reply within 24 hours.