Ir directamente a la información del producto
1 de 7

Mikroelektronika d.o.o.

LED Driver 7 Click Board™

LED Driver 7 Click Board™

SKU: MIKROE-3917

Precio habitual
£28.00 exc VAT
£33.60 inc VAT
Precio habitual £28.00 GBP Precio de oferta
£28.00 exc VAT
£33.60 inc VAT
Oferta Agotado
Los gastos de envío se calculan en la pantalla de pago.
If no stock shown above, check availability

Formas de pago

  • American Express
  • Visa
  • Mastercard
  • Maestro
  • PayPal
  • Apple Pay
  • Google Pay
  • Bank transfer
Ver todos los detalles

Descripción general

The LED Driver 7 Click Board™ is equipped with the LTC3490, single-cell 350mA LED driver from Analog Devices. The LED Driver 7 Click Board™ can be used for portable lighting, rechargeable flashlights, system calibrations, electronics level settings, automotive electronics adjustments, mechanical trimmers and potentiometer replacements. The LED drive current can be reduced by changing the voltage on the CTRL/SHDN pin with AD5171, a 64-position OTP digital potentiometer from Analog Devices (ADI).

How Does The LED Driver 7 Click Board™ Work?

The LED Driver 7 Click Board™ features the LTC3490, single cell 350mA LED driver from Analog Devices. It provides a constant current drive for 1W LED applications. It is a high efficiency boost converter. Some of its key features include the 350mA Constant Current Output, Fixed Frequency Operation: 1.3MHz, Low Quiescent Current: <1mA and Dimming Control.

LED Driver 7 Click Board™

The LED Driver 7 Click Board™ also features the AD5171, a 64-position OTP digital potentiometer from Analog Devices. The AD5171 is used for changing the voltage on the CTRL/SHDN pin. This voltage can control the LED drive current from 0mA to 350mA. The AD5171 uses fuse link technology to achieve the memory retention of the resistance setting function. OTP is a cost-effective alternative over the EEMEM approach for users who do not need to reprogram new memory settings in the digital potentiometer. This device performs the same electronic adjustment function as most mechanical trimmers and variable resistors. The AD5171 is programmed using a 2-wire, I2 C®- compatible digital control. It allows unlimited adjustments before permanently setting the resistance value. During the OTP activation, a permanent fuse blown command is sent after the final value is determined, freezing the wiper position at a given setting (analogous to placing epoxy on a mechanical trimmer).

Given the options its features offer, the LED Driver 7 Click Board™ is ideally used for Portable lighting, rechargeable flashlights, system calibrations, electronics level settings, automotive electronics adjustments, mechanical trimmers and potentiometer replacements.

The LED Driver 7 Click Board™ is designed to be operated only with 3.3V logic level. A proper logic voltage level conversion should be performed before the Click Board™ is used with MCUs with logic levels of 5V.

SPECIFICATIONS

Type LED Drivers
Applications Portable lighting, rechargeable flashlights, system calibrations, electronics level settings, automotive electronics adjustments, mechanical trimmers and potentiometer replacements
On-board modules LTC3490, single cell 350mA LED driver from Analog Devices AD5171, a 64-position OTP digital potentiometer also from Analog Devices
Key Features Dimming Control, 350mA Constant Current Output, I2C-compatible digital interface
Interface I2C
Compatibility mikroBUS
Click Board™ size S (28.6 x 25.4 mm)
Input Voltage 3.3V

PINOUT DIAGRAM

This table shows how the pinout on LED Driver 7 Click Board™ corresponds to the pinout on the mikroBUS socket (the latter shown in the two middle columns).

Notes Pin mikroBUS logo.png Pin Notes
NC 1 AN PWM 16 NC
NC 2 RST INT 15 NC
NC 3 CS RX 14 NC
NC 4 SCK TX 13 NC
NC 5 MISO SCL 12 SCL I2C Clock
NC 6 MOSI SDA 11 SDA I2C Data
Power Supply 3.3V 7 3.3V 5V 10 NC
Ground GND 8 GND GND 9 GND Ground


ONBOARD SETTINGS AND INDICATORS

Label Name Default Description
LD1 PWR - Power LED Indicator

Overview
CategoryLED Drivers
ApplicationsPortable lighting, rechargeable flashlights, system calibrations, electronics level settings, automotive electronics adjustments, mechanical trimmers and potentiometer replacements
Key components
On-board modulesLTC3490, single cell 350mA LED driver from Analog Devices AD5171, a 64-position OTP digital potentiometer also from Analog Devices
Features
Key featuresDimming Control, 350mA Constant Current Output, I2C-compatible digital interface
Interfaces
InterfaceI2C
CompatibilitymikroBUS™
Electrical
Input voltage3.3V
Physical
Click board sizeS (28.6 x 25.4 mm)
Compliance
Country of originSerbia
RoHSCompliant
Información de pedido
Referencia (SKU)MIKROE-3917
FabricanteMikroelektronika d.o.o.
EAN8606018719068
Garantía12 months
Peso de envío0.016 kg
  • 1 × LED Driver 7 Click Board™

Contacte con nosotros para confirmar el contenido completo de la caja.

Preguntas a nuestros ingenieros

Preguntas y respuestas

No questions have been asked about this product yet. Ask our engineers below and we'll reply by email.

¿No encuentra la respuesta? Pregunte a nuestros ingenieros.

Hacer una pregunta

Ask Our Engineers About This Product

Your question goes to the Debug Store technical team. We answer by email, and useful questions may be added to this page without your name or email address.

We reply within 24 hours.