How To Use Tag-Connect Cables With Sauris TI Programmers
Sauris TI programmers such as the SAU100-USB support TI's 14-pin (and 20-pin) JTAG headers. For the 14-pin TI connector (TI-14), Tag-Connect's TC-C2000 adapter converts it to a 10-pin TC2050 footprint, so the board needs no header.
In short: fit a TC-C2000 adapter to the TI-14 connector and use a TC2050-IDC (legged) or TC2050-IDC-NL (no legs) cable. Pick the adapter version to suit the gender of your programmer's cable end.
Recommended Parts
| Option | Parts |
|---|---|
| Legged | TC-C2000 with TC2050-IDC |
| No-legs | TC-C2000 with TC2050-IDC-NL and a TC2050-CLIP |
The TC-C2000 comes as TC-C2000-M (male pins, for a TI-14 male debug end such as the XDS100v2) and as female versions, TC-C2000-F-90 (unkeyed) and TC-C2000-F-180 (keyed), for other TI-14 debuggers.
TC-C2000 Mapping: TI-14 to TC2050
| TI-14 pin | Signal | TC2050 pin |
|---|---|---|
| 1 | TMS | 2 |
| 2 | /TRST | 9 |
| 3 | TDI | 8 |
| 5 | VCC | 1 |
| 7 | TDO | 6 |
| 11 | TCK | 4 |
| 13 | EMU0 | 7 |
| 14 | EMU1 | 10 |
| 4, 6, 8, 10, 12 | GND | 3 and 5 (pin 5 can be set to TCK_RET by jumper) |
- The adapter has EMU0 and EMU1 pull-ups on board.
- As shipped, the adapter loops TCK back to TCK_RET, so the target doesn't need to provide TCK_RET.
- TDIS is not carried to the TC2050 footprint. TCK_RET (TI-14 pin 9) reaches TC2050 pin 4 or 5 only if the adapter's jumpers are changed.
Frequently Asked Questions
Which Tag-Connect adapter fits a TI 14-pin JTAG programmer?
The TC-C2000, used with a TC2050-IDC or TC2050-IDC-NL cable.
Do I need to route TCK_RET on my board?
No. In its factory setting the TC-C2000 loops TCK to TCK_RET on the adapter.
Related Guides
Sources
Last reviewed 22 November 2026 by The Debug Store, supplier of Tag-Connect cables.