Dediprog SF100 SPI NOR Flash Programmer
Dediprog SF100 SPI NOR Flash Programmer
Key Features
- Affordable and essential for all engineers
- Powered by Its USB Interface to a Host PC
- Includes Windows PC Software
The Dediprog SF100 SPI NOR Flash Programmer is the perfect programming tool that can be easily controlled through the USB port using Dediprog software. The SF100 is so affordable that you should have one in your toolkit.
The Dediprog SF100 is a high-speed in-system programmer (ISP) for programming serial flash memory devices. It is a USB-based programmer that supports a wide range of serial flash devices, including SPI NOR flash, SPI NAND flash, and eMMC devices.
To use the SF100 programmer, you will need to install the SF100 software on your computer. This software provides a user-friendly interface for configuring the programmer and programming your serial flash devices. You can find more information and download the software from the Dediprog website.
Once the software is installed, you can connect the SF100 programmer to your computer using the USB cable provided. Then, you can use the software to select your serial flash device, configure the programming options, and start the programming process. The SF100 programmer is capable of programming at high speeds, making it suitable for use in high-volume production environments.
Hardware
The Dediprog SF100 is designed with an ISP header, through an appropriate connector; users can connect the programmer and drive the SPI signals, supply the memory and control the controller or application status. Please refer to Table 1 for the SF100 2x7 header pin out. DediProg also provides the SF100 ISP Cable which is used to connect the SF100 programmer to the 2X4 2.54mm ISP Pin Header on board, please refer to Table 2 for the SF100 ISP Cable 2x4 pin out.
SF100 ISP Header Pin Out (2x7)
1 | I/O1 | I/O4 | 2 |
3 | I/O2 or CS2 | NC | 4 |
5 | Vcc | GND | 6 |
7 | CS | CLK | 8 |
9 | MISO | MOSI | 10 |
11 | Vpp/Acc | I/O3 | 12 |
13 | SCL | SDA | 14 |
ISP Cable Connector Pin Out (2x4)
1 | Vcc | GND | 2 |
3 | CS | CLK | 4 |
5 | MISO | MOSI | 6 |
7 | Vpp/Acc | I/O3 | 8 |
SF100 Application Software
The SF100 USB software tool chain offers high flexibility and fits different and the highest requirements:
Engineering Mode
For engineers and expert to access advanced features for development, repairing etc.
Production Mode
The SF100 Application software supports Gang Programming. Additional programmers can be added at any time production capacity needs to be increased.
For operators in production to control multiple programmers and improve the throughput.
Command Line
Customer software can control multiple SF100 programmers by command line interface.
Dediprog SF100 SPI NOR Flash Programmer
Frequently Asked Questions
Ask a Question-
How do I update the firmware on the Dediprog SF100?
To update the firmware on the Dediprog SF100, you will need to download the latest firmware from the Dediprog website and follow the instructions provided to install it on the programmer.
-
Can the Dediprog SF100 program multiple devices at the same time?
Yes, the Dediprog SF100 has the capability to program multiple devices at the same time, depending on the number of sockets available on the programmer and the number of PC USB ports.
-
Does the Dediprog SF100 come with any software or do I need to purchase it separately?
The Dediprog SF100 comes with its own software. This software is used to communicate with and control the programmer.
-
Is the Dediprog SF100 compatible with multiple programming languages?
Yes, the Dediprog SF100 is compatible with multiple programming languages, including C, C++, and Python.
-
What operating systems are supported by the Dediprog SF100?
Windows 7, 8, 8.1, and 10 Linux
-
How do I connect the Dediprog SF100 to my computer?
The Dediprog SF100 can be connected to your computer via USB. The USB Interface also powers the SF100 so it doesn't need a separate power supply.
-
What types of devices can the Dediprog SF100 program?
- BIOS chips
- Freescale MCU using the Ezport (MCF5223, MCF5221, MCF5213) or the external SPI Flash of Freescale MCU using the SBF interface (MCF5445, MCF5227)
- NOR Flash -
What is the Dediprog SF100 and what is it used for?
The Dediprog SF100 is a high-speed universal programmer for serial flash memories. It is used to program serial flash memory devices such as BIOS chips, microcontrollers, and FPGAs.
What's Included
Dediprog SF100 SPI NOR Flash Programmer
- SF100 Programmer x 1
- USB cable x 1
- ISP cable x 1
- SF100 Universal Adaptor x 1