Mikroelektronika d.o.o.
Clicker Board 2 for FT90x
Clicker Board 2 for FT90x
Couldn't load pickup availability
The Clicker 2 Board™ for FT90x is a fast and compact development kit powered by FT900, a 32-bit FT32 core microcontroller. Equipped with two MikroBUS sockets, this development board provides for Click Board™ connectivity to quickly build innumerable gadgets with unique features and functionalities.
The microcontroller can be programmed using an external MikroProg for FT90x programmer with MikroProg Suite for FT90x software.
![Mikroelektronika d.o.o. MIKROE-1724 Clicker Board 2 for FT90x - The Debug Store UK](http://thedebugstore.com/cdn/shop/products/mikroelektronika-d-o-o-clicker-board-clicker-board-2-for-ft90x-30258325422269.jpg?v=1684999381&width=1445)
![Mikroelektronika d.o.o. MIKROE-1724 Clicker Board 2 for FT90x - The Debug Store UK](http://thedebugstore.com/cdn/shop/products/mikroelektronika-d-o-o-clicker-board-clicker-board-2-for-ft90x-30258291310781.jpg?v=1684998830&width=1445)
![Mikroelektronika d.o.o. MIKROE-1724 Clicker Board 2 for FT90x - The Debug Store UK](http://thedebugstore.com/cdn/shop/products/mikroelektronika-d-o-o-clicker-board-clicker-board-2-for-ft90x-28863134597309.jpg?v=1685099983&width=1445)
Technical Specifications
Thousands of possibilities with Click boards™
With two mikroBUS™ sockets on clicker 2, you can take advantage of the huge potential of Click boards™, the constantly expanding range of over 1300 add-on Click boards™. Blend different functionalities together and come up with new and original inventions. That's just two clicks and your project is half-way done. Go ahead and play with a few ideas right away.
Programming
To make your prototyping experience as convenient as possible, clicker 2 for FT90x is preprogrammed with a USB HID bootloader. Just download our mikroBootloader application and you're ready to upload your firmware. On-board mikroProg for FT90x connector enables programming through external programmer/debugger.
Power Management
Clicker 2 for FT90x features LTC®3586, a highly integrated power management and battery charger IC that includes a current limited switching PowerPath manager. LTC®3586 also enables battery charging over a USB connection. You can supply power to the board with a micro USB cable provided in the package. On-board voltage regulators provide the appropriate voltage levels to each component on the board.
Powering Your Inventions
Focus on your main idea because the Clicker 2 Board for FT90x will take care of the details for you: your prototype already has a power management system in place. The onboard LTC®3586-1 IC will provide 3.3V or 5V to the clicks. It turns the USB port into a battery charger. For convenience, clicker 2 for FT900 features a reset button and an ON/OFF switch (you can also connect an external ON/OFF switch).
Processor
- FT900, 3.10 DMIPS/MHz
- 256KB shadow program memory
- 256 kB of Flash
Connectivity
- 52 programmable GPIOs
- 2 mikroBUS host sockets
- USB Mini-B connector
EXPANDING YOUR IDEAS
No idea is too big for the Clicker 2 Board for FT90x. Let your train of thought lead you anywhere. Consider all options, explore all directions. More click boards? Additional electronics? Done and done. clicker 2 has the same pocket-size form factor and the same pair of 1x26 connection pads as mikromedia boards. This makes it compatible with mikromedia shields letting you expand your device any way you want.
mikroBUS Shield for mikromedia
mikromedia connect shield
mikromedia PROTO shield
Battery Boost Shield
Hardware Debugging
Efficiently erradicate any bugs and iron out your code until it's wrinkle free and your clicker 2 device works perfectly—use mikroProg™ for FT900. It's a fast hardware debugger and programmer with outstanding performance. Especially when used together with our FT90x compilers.
USB HID BOOTLOADER Inside
To make your prototyping experience as convenient as possible, clicker 2 for FT900 is preprogrammed with a USB-HID bootloader. Just download our mikroBootloader application and you're ready to upload your firmware.
Hardware Debugging
Efficiently erradicate any bugs and iron out your code until it's wrinkle free and your clicker 2 device works perfectly—use mikroProg™ for FT900. It's a fast hardware debugger and programmer with outstanding performance. Especially when used together with our FT90x compilers.
USB The HID BOOTLOADER Inside
To make your prototyping experience as convenient as possible, clicker 2 for FT900 is preprogrammed with a USB-HID bootloader. Just download our mikroBootloader application and you're ready to upload your firmware.
SPECIFICATION TABLE
Type | Clicker 2 |
Architecture | FT90x (32-bit) |
Programming | Bootloader, External |
Silicon Vendor | FTDI |
mikroBUS No. | 2 |
Supply Voltage | Battery, USB |
Category | Clicker 2 |
Clicker Board 2 for FT90x
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.
![banner Image](http://thedebugstore.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_medium.gif)