Advanced Cable Tester Module Bundle - USB-C

• Individually measure the DC resistance of VBUS and GND wires
• Individually measure the DC resistance of VBUS and GND pins in the USB Type-C connector
• Verify wiring is correct with no shorted or disconnected wires
• Testing of USB 2.0 pairs is supported at about 518 Mbps, and any present SuperSpeed pairs tested at 5 Gbps or 10 Gbps.
• This is all you will need for testing USB Type-C cables, whether USB 2.0, USB 3.1 Gen1, USB 3.1 Gen2, or USB 3.2

Test Compatibility/Coverage

• USB 3.2/3.1/3.0/2.0
• PD 2.0, PD 3.0
• Short testing - Dynamic visualization of test results
• Open testing - Dynamic visualization of test results
• Continuity testing - Dynamic visualization of test results
• DC resistance measurement for most wires, with milliohm precision on ground and power wires, ohm resolution on most other wires, continuity check only on high-speed data lines
• Signal integrity testing of data lines to 12.8 Gbps per channel
• E-Marker verification