Mikroelektronika d.o.o.
Compass 2 Click Board
Compass 2 Click Board
Couldn't load pickup availability
Overview
The Compass 2 Click Board™ carries the AK8963 3-axis electronic compass. The AK8963 sensor is based on the Hall effect. The Click Board™ is designed to run on a 3.3V power supply only. It communicates with the target microcontroller through either the I2C or SPI interface, with additional functionality provided by the INT pin on the mikroBUS line.
The Compass 2 Click Board™ carries the AK8963 3-axis electronic compass. The AK8963 sensor is based on the Hall effect. The click is designed to run on a 3.3V power supply only. It communicates with the target microcontroller through either I2C or SPI interface, with additional functionality provided by the INT pin on the mikroBUS™ line.
AK8963 Features
The built-in ADC converter can be set up at either 14 or 16 bit resolution, for each of the 3 axes. The sensitivity is 0.6µT/LSB typ. at 14-bit, and 0.15µT/LSB at 16-bit.
AK8963 incorporates magnetic sensors for detecting terrestrial magnetism in the X-axis, Y-axis, and Z-axis, a sensor driving circuit, signal amplifier chain, and an arithmetic circuit for processing the signal from each sensor.
Key Features
- AK8963 electronic compass
- Built-in ADC converter
- 14-/16-bit selectable resolution
- Sensitivity:
- 0.6 µT/LSB typ. (14-bit)
- 0.15µT/LSB typ. (16-bit)
- I2C or SPI interface
- 3.3V power supply
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.