Lipowsky Industrie Elektronik GmbH
SKU: BABY-LIN-MB-IILipowsky Baby-LIN-MB II CAN/LIN Bus Simulator
Lipowsky Baby-LIN-MB II CAN/LIN Bus Simulator
Couldn't load pickup availability
The Lipowsky Baby-LIN-MB-II Multi-Bus Gateway can simulate LIN Bus traffic derived from Ethernet or RS-232C data interfaces. The device is also expandable to extend its interfacing options.
The Lipowsky Baby-LIN-MB-II can be built with additional LIN and Digital I/O ports.
Features
-
Linux based system allows for easy adaption of network protocols and remote support options.
-
Multi SDF capable, you can switch between different LIN bus configurations by just loading another SDF form the internal flash drive.
-
Connection to PLC or host system via ethernet connection or RS-232.
-
SDF files or firmware updates are installed on the device by using an USB stick.
-
Base version integrated LIN1, LIN2, CAN-High-Speed, RS-232, LAN interface hardware.
-
Base version supports LIN1 interface (including SDF-V3), LIN2and CAN support can be activated by separate sold activation keys.
-
2 internal MIF module slots for extension, MIF-LIN-02 module with 2 LIN interfaces allows a total of 6 LIN lines in one device.
-
Digital input and digital output available.
-
Secure shut down due to integrated USV (15 seconds hold-up time).
-
Optional compatibility adapter converts new Sub-D-25 connector pinning to 2 * Sub-D-9 connector pinning of Baby-LIN-MB.
Technical Function
-
Supports LIN bus versions 1.2, 1.3, 2.0, 2.1 and 2.2, as well as CAN high-speed, RS-232 and LAN interface
-
LIN interface with 2 MIF-LIN-02 modules and a total of 6 LIN channels
-
Input and output with 24V signal for synchronisation purposes
-
Integrated UPS with 15 seconds bridging time
-
Galvanically isolated LIN and CAN bus interface
-
MicroSD card up to 32 GB
-
On-board voltages from 8 - 28V
Application Areas
-
Application of network protocols and remote maintenance functions for Industry 4.0
-
Control of different interfaces via multi SDF capability and 6 LIN bus configurations
-
Can be used for PLC coupling, restbus simulation, control unit test, automatic test systems and EOL applications
-
Enables gateway functions between LIN and CAN buses
-
Stand-alone mode with freely programmable command sequences possible
-
Data logging function possible at 100% bus workload
-
Remote maintenance for Industry 4.0 through integrated website, SDF upload, log file download, parameter change and firmware update, all possible from anywhere
Software
- Tested with
- Windows XP
- Windows Vista
- Windows 7 (32/64 Bit)
- Windows 8 (32/64 Bit)
- Windows 10 (32/64 Bit)
- Library available for custom applications.
- Windows (x86 & x64)
- PC-based Linux (x86 & x64)
- ARM-based Linux (x86 & x64), especially for the RaspberryPi
- Native programming e.g. in C/C++ as well as programming in .NET languages, Python, VB6 and LabView using wrappers.
Lipowsky Baby-LIN-MB II CAN/LIN Bus Simulator
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.