Lineeye Co Ltd
Lineeye SI-60-E LAN to RS-232C Interface Converter
Lineeye SI-60-E LAN to RS-232C Interface Converter
Couldn't load pickup availability
The Lineeye SI-60-E is an interface converter to connect factory automation equipment and analyzers, which only have the RS-232C serial communication port, to LAN. The built-in Lantronix Xport® on the LAN interface converts RS-232C data into LAN protocol (TCP/IP). The device supports a 35mm DIN rail and a wide range of operating temperatures. Therefore, you can use it for factory automation without worry.
■Block Chart
RS-232C connector pin arrangement
| Pin *1 | Signal | I/O *2 | |
|---|---|---|---|
| DTE | DCE | ||
| 1 | FG | - | - |
| 2 | SD | Out | In |
| 3 | RD | In | Out |
| 4 | RS (RTS) | Out | In |
| 5 | CS (CTS) | In | Out |
| 6 | DR (DSR) *3 | In | In |
| 7 | GND | - | - |
| 9 | +DC IN *4 | - | - |
| 20 | ER (DTR) *3 | In | In |
*1: Pins not listed here are not connected. *2: The DTE/DCE selector switch changes In and Out. *3: Pins 6 and 20 are internally connected in this unit. *4: Power can be supplied from this pin when the AC adapter is not used.
■Example of SI-60 Connection
Attached software (COM port Redirector TM ) controls the RS-232C device as if it is connecting directly to the serial port (COM1 to n) of PC. This reduces the modification of communication programs. Also, you can transmit/receive RS-232C serial data directly using the TCP/IP socket communication method.
■Locate RS-232C devices to further place using LAN cable
2sets of SI-60 makes it possible to locate the RS-232C devices in the far place using LAN cable. One set of SI-60 has to be in Server mode (or Server and Client mode) and the other one has to be in Client mode (or Server and Client) mode.
■Connection with LINEEYE analyzer
By connecting the LINEEYE analyzers to LAN (Ethernet) using SI-60, you can analyze the data on a PC in the office far from the workplace in real time, continuously measuring the data between the device A and B.
■Space-saving
Able to install the device on the 35mm DIN rail using Optional DIN plate (SI-DIN70), and to install it on the wall using the optional wall bracket (SI-WM1).
DIN Rail Installation Example
Optional "Metal Fitting for Wall"
■2 kinds of power input
Able to supply the power from attached AC adapter. Supplying power from Dsub 9pin of device via RS-232C device eliminates the use of AC adapter and saves space.
■A Useful Tool for Multiple Operation
SILANIOinit is a configuration tool for LINEEYE products embedded WiPort-NR. It is useful and saves time to rewrite the WiPort-NR configuration file (Setup Record) .
［ Functions ］
- Searches the device on the Network. Displays the MAC address.
- Reads and saves the configuration (set-up record) of converter.
- Writes to the set-up record of selected converter.
- Sets the IP address of selected converter.
Configuration tool (SILANIOinit)
Specifications
| Conversion | LAN <->RS-232C |
|---|---|
| LAN Interface | RJ-45 connector 10BASE-T/100BASE-TX, Ethernet IEEE802.3 |
| LAN Protocol | ARP, UDP/IP, TCP/IP, ICMP, SNMP, Telnet, DHCP, BOOTP, HTTP, AutoIP |
| Serial Interface | RS-232C, Dsub25 Pin (Female), DTE/DCE Switchable |
| Serial signal | SD, RD, RTS, CTS, DSR/DTR*1 |
| Synchronous Method | Asynchronous |
| Baud Rate (bps) | 300/600/1200/2400/4800/9600/19200/38400/57600/115200/230400 |
| Data Frame Structure | Data (7 or 8) + Parity (Even, Odd, None) + Stop (1 or 2) |
| Flow Control | Xon/off, RTS/CTS |
| Management Initial setting | Web server, Telnet login, Serial login, SNMP |
| Sample software | Transmit and receive program (with source code) for Windows® |
| Firmware | Able to write on the FTP or internal flash memory via serial communication. |
| LED display | LAN connection, RS-232C signal status |
| Power Supply *2 | Dsub connector: DC 5 to 12V AC adapter: AC100V+/- 15%, 50/60Hz |
| Power Consumption*3 | 4.2VA (when using AC adapter (AC100V) |
| Temperature | Operating: -10 to 50 degree Celsius*4 Storage: -20 to 80 degree Celsius |
| Humidity | 10 to 95% RH (no condensation) |
| External Dimension (mm) | 65(W) x 95(D) x 24(H) |
| Weight (g) | Approx. 200 |
| Accessories | AC adapter (VEN-650B), Utility CD-ROM, Instruction manual, Warranty |
*1 DSR and DTR are connected inside the unit, which logic state can be checked with CP1 of XPort.
*2 Supplied either from.
*3 When using the attached AC adapter (AC100V).
*4 Operation temperature will be -10 to 40 degree Celsius when DC power voltage from Dsub connecter is more than 10V.
Lineeye SI-60-E LAN to RS-232C Interface Converter
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.
