Lineeye Co Ltd
Lineeye LE-8500X Multi-Protocol Analyzer
Lineeye LE-8500X Multi-Protocol Analyzer
Couldn't load pickup availability
Overview
The Lineeye LE-8500X/LE-8500XR is a handy communication protocol analyzer equipped with a measurement board that can simultaneously measure and test the power supply status of one PoE (Power over Ethernet) and two lines of Ethernet communication data on a line (from 10BASE-T to 1000BASE-T).
It can be widely used for diagnosing and testing LAN networks and related devices using the packet monitor function, packet generator (PG) function, statistical analysis function, PoE judgment function, etc., according to the test situation.
The Lineeye LE-8500X/LE-8500XR has a 7-inch wide-colour LCD with a touch panel, so you can check the measurement data immediately on-site without using a personal computer. You can log the data to a USB flash memory etc., via USB 3.0, to analyze the data in detail after capture.
In addition, as the timestamps that are corrected with high accuracy by GNSS signals can be added to the monitor data by using an optional GPS antenna, by checking the time stamps, you can compare and analyze the data measured simultaneously at two points for an extended period to investigate a communication failure.
Furthermore, by replacing the standard measurement board with another (sold as an option), the communication interface to be measured can be expanded later so that they can be widely used from network systems to development testing and maintenance of embedded communication equipment.
Features
- Simultaneous measurement of 2 Ethernet packets and PoE power (LE-8500X / LE-8500XR)
- Output test packets at wire-rate from 2 channels at the same time (LE-8500X / LE-8500XR)
- PoE++ judgment, long-time PoE power recording (LE-8500X / LE-8500XR)
- Supports RS-232C, RS-422/RS-485, TTL communication (LE-8500X-RT / LE-8500XR-RT)
- Supports high-speed serial communication of up to 20 Mbps (LE-8500X-RT / LE-8500XR-RT)
- Various data can be displayed on the 7-inch wide-color LCD main unit screen, with touch operation capability
- Accurate time stamps with time correction function using GNSS (PPS) signals
- Automatically records communication logs to large-capacity external storage via USB3.2 (Gen1)
- Measurement data can be transferred to a PC for analysis via LAN, USB, or Wi-Fi (XR only) connection
Specification
| Model*1 | LE-8500X / LE-8500XR | LE-8500X-RT / LE-8500XR-RT |
|---|---|---|
| 10/100/1000BASE-T | Yes | With SB-GE2*3 |
| RS-232C, RS-422/485, TTL | With SB-R2TS1*2 | Yes |
| Protocol | IPv4, ARP, ICMP, TCP, UDP, DHCP, EtherCAT | ASYNC, PPP, SYNC, BSC, HDLC, SDLC, X.25, CC-LINK, Modbus, PROFIBUS, I2C, SPI, BURST |
| Max. speed | 1Gbps | 4Mbps (20Mbps in high-speed mode) |
| Measurement test function | Packet monitor, packet and PoE monitor, PoE judgement recording, statistic analysis, delay time measurement, packet generate, Ping, port blink | Monitor, simulation, BERT, logic analysis, statistic analysis, signal level measurement, delay time measurement |
| Capture memory | 1Gbyte | |
| Display | 7-inch TFT colour with capacitive touch-panel | |
| GPS port | SMA (female), for time correction of the time stamp. Optional GPS antenna to be connected | |
| USB device port | Type-C connector, for SuperSpeed transfer. A PC is to be connected | |
| USB host port | Standard A connector, for SuperSpeed transfer. External storage (USB flash, SSD) to be connected | |
| SD card slot | SDHC card supported. SD Association standard compliant | |
| Power | Built-in lithium-ion battery or attached AC adapter | |
| Size & Weight | 234(W) x 186(D) x 44(H)mm, about 990g | |
- "XR" model has Wi-Fi function (for PC connection)
- Functions equivalent to LE-8500X-RT by using optional board (SB-R2TS1)
- Functions equivalent to LE-8500X by using optional board (SB-GE2)
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.