Mikroelektronika d.o.o.
Current 9 Click Board™
Current 9 Click Board™
Couldn't load pickup availability
Key Features
- Low power consumption, integrated current carrying conductor, low total error output, high bandwidth, fast response time, high accuracy and precision, possibility of signal processing in analogue and digital form, and more
- Based on the CT415-HSN830DR - XtremeSense® TMR current sensor from Crocus Technology
- Can be used for many consumer, enterprise, and industrial applications
- mikroBUS: I2C and Analogue Interfaces
Overview
The Current 9 Click Board™ is a compact add-on board providing a precise and accurate current sensing solution. This board features the CT415-HSN830DR, high-bandwidth and ultra-low-noise XtremeSense® TMR current sensor designed for the current range up to 30A from Crocus Technology. This sensor also features an integrated current-carrying conductor which handles rated current and generates a current measurement as a linear analogue output voltage, accomplishing a total output error of about ±1% full-scale. After that, the user can process the output voltage in analogue or digital form. This Click board™ is ideal for high-accuracy current measurements for many consumer, enterprise, and industrial applications.
The Current 9 Click Board™ is supported by a mikroSDK-compliant library, which includes functions that simplify software development. This Click board™ comes as a thoroughly tested product, ready to be used on a system equipped with the mikroBUS™ socket.
| General Information | |
|---|---|
Part Number (SKU) |
MIKROE-5319
|
Manufacturer |
|
| Physical and Mechanical | |
Weight |
0.02 kg
|
| Other | |
HS Code Customs Tariff code
|
|
EAN |
8606027387661
|
DO NOT TOUCH THE BOARD WHILE THE LOAD IS CONNECTED!
Note: This Click board™ needs to be used by trained personnel only while applying high voltages. Special care should be taken when working with hazardous voltage levels.
How Does The Current 9 Click Board™ Work?
The Current 9 Click Board™ is based on the CT415-HSN830DR, an XtremeSense® TMR current sensor providing high-accuracy current measurements from Crocus Technology. The CT415-HSN830DR comes with an integrated current carrying conductor (CCC) that handles current from 0A up to 30A. It has high sensitivity and a wide dynamic range with excellent accuracy (low total output error) across temperature range from –40°C to +85°C making it suitable for many consumer, enterprise, and industrial applications.
When current flows through the CCC, the XtremeSense® TMR sensors inside the chip sense the field, generating a differential voltage signal that goes through the analogue front-end to output a current measurement with less than ±1% full-scale total output error. The CT415-HSN830DR is designed to enable a fast response time for the current measurement. In addition, the user is provided with the option of selecting the output voltage level of the sensor performed by the onboard SMD jumper by populating it to an appropriate position marked as 3V3 or 5V. Even with high bandwidth of 1MHz, the CT415 consumes minimal power.
The output signal of the CT415-HSN830DR can be converted to a digital value using MCP3221, a successive approximation A/D converter with a 12-bit resolution from Microchip using a 2-wire I2C compatible interface, or can be sent directly to an analogue pin of the mikroBUS™ socket labelled as AN. Selection can be performed by onboard SMD jumper labelled as ADC SEL, placing it to an appropriate position marked as EXT and INT.
Also, the Current 9 Click Board™ should be connected in series with the load. The current is measured by two onboard terminal connectors, one terminal block for the positive and the other for the negative current input.
The Current 9 Click Board™ can operate with both 3.3V and 5V logic voltage levels selected via the VCC SEL jumper. This way, it is allowed for both 3.3V and 5V capable MCUs to use the communication lines properly. However, the Click board™ comes equipped with a library containing easy-to-use functions and an example code that can be used, as a reference, for further development.
SPECIFICATIONS
| Type | Measurements |
| Applications | Can be used for many consumer, enterprise, and industrial applications |
| On-board modules | CT415-HSN830DR - XtremeSense® TMR current sensor from Crocus Technology |
| Key Features | Low power consumption, integrated current carrying conductor, low total error output, high bandwidth, fast response time, high accuracy and precision, the possibility of signal processing in analogue and digital form, and more |
| Interface | Analog, I2C |
| Compatibility | mikroBUS |
| Click board size | L (57.15 x 25.4 mm) |
| Input Voltage | 3.3V or 5V |
PINOUT DIAGRAM
This table shows how the pinout of the Current 9 Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
| Notes | Pin |  |
Pin | Notes | |||
|---|---|---|---|---|---|---|---|
| Analog Signal | AN | 1 | AN | PWM | 16 | NC | |
| NC | 2 | RST | INT | 15 | NC | ||
| NC | 3 | CS | RX | 14 | NC | ||
| NC | 4 | SCK | TX | 13 | NC | ||
| NC | 5 | MISO | SCL | 12 | SCL | I2C Clock | |
| NC | 6 | MOSI | SDA | 11 | SDA | I2C Data | |
| Power Supply | 3.3V | 7 | 3.3V | 5V | 10 | 5V | Power Supply |
| Ground | GND | 8 | GND | GND | 9 | GND | Ground |
ONBOARD SETTINGS AND INDICATORS
| Label | Name | Default | Description |
|---|---|---|---|
| LD1 | PWR | - | Power LED Indicator |
| JP2 | OUT SEL | Left | CT415 Output Voltage Level Selection 3V3/5V: Left position 3V3, Right position 5V |
| JP2 | VCC SEL | Right | Logic Level Voltage Selection 3V3/5V: Left position 3V3, Right position 5V |
| JP3 | ADC SEL | Right | Output Voltage A/D Selection EXT/INT: Left position EXT, Right position INT |
CURRENT 9 CLICK ELECTRICAL SPECIFICATIONS
| Description | Min | Typ | Max | Unit |
|---|---|---|---|---|
| Supply Voltage | 3.3 | - | 5 | V |
| Current Measurement Range | 0 | - | 30 | A |
| Operating Temperature Range | -40 | +25 | +85 | °C |
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.