Mikroelektronika d.o.o.
IR Beacon Click Board
IR Beacon Click Board
Couldn't load pickup availability
The IR Beacon Click Board™ is a mikroBUS add-on board with an array of nine high speed infrared emitting diodes. It functions as a beacon device, transmitting infrared rays in a wide-angle, which can be detected by nearby infrared receivers (such as the one on IR Click Board™). Each of the nine VSMB2948SL diodes has a transparent plastic package that serves as tiny lenses.
![Mikroelektronika d.o.o. MIKROE-1939 IR Beacon Click Board - The Debug Store UK](http://thedebugstore.com/cdn/shop/products/mikroelektronika-d-o-o-click-board-ir-beacon-click-board-30246602866877.jpg?v=1685028356&width=1445)
![Mikroelektronika d.o.o. MIKROE-1939 IR Beacon Click Board - The Debug Store UK](http://thedebugstore.com/cdn/shop/products/mikroelektronika-d-o-o-click-board-ir-beacon-click-board-30246602735805.jpg?v=1685028359&width=1445)
![Mikroelektronika d.o.o. MIKROE-1939 IR Beacon Click Board - The Debug Store UK](http://thedebugstore.com/cdn/shop/products/mikroelektronika-d-o-o-click-board-ir-beacon-click-board-28898085568701.jpg?v=1685028363&width=1445)
![Mikroelektronika d.o.o. MIKROE-1939 IR Beacon Click Board - The Debug Store UK](http://thedebugstore.com/cdn/shop/products/mikroelektronika-d-o-o-click-board-ir-beacon-click-board-28898085634237.jpg?v=1685120327&width=1445)
The IR wave has a half intensity angle of ±25 degrees. The diodes have high radiant power and intensity with a peak wavelengths of 940nm.
The IR Beacon Click Board™ is suitable for high pulse current operation. The mainboard MCU drives the infrared diodes through the mikroBUS MOD pin, providing a carrier signal (which can be modified to match the frequency of the receiver). Either UART or PWM can be used to transmit a signal to a target receiver (specified by the position of the TX SEL jumper is in the middle of the board).
The range is up to half a meter. You can increase it by stacking multiple IR Beacon Click Board™s onto a same mikroBUS socket.
The board can use either a 3.3V or a 5V power supply.
IR Beacon Click Board
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.
![banner Image](http://thedebugstore.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_medium.gif)