Mikroelektronika d.o.o.
Thermo 2 Click Board™
Thermo 2 Click Board™
Couldn't load pickup availability
Overview
The Thermo 2 Click Board™ is a measurement accessory board that includes DS1825, a programmable resolution 1-wire digital thermometer. The digital thermometer provides 9 to 12-bit centigrade temperature measurements and communicates over a 1-Wire bus.
The DS1825 chip has a unique 64-bit serial code, which allows the user to connect multiple DS1825s to function on the same 1-Wire bus.
| General Information | |
|---|---|
Part Number (SKU) |
MIKROE-1840
|
Manufacturer |
|
| Physical and Mechanical | |
Weight |
0.025 kg
|
| Other | |
Country of Origin |
|
HS Code Customs Tariff code
|
|
EAN |
8606015076287
|
Warranty |
|
The Thermo 2 Click Board™ carries DS1825, a programmable resolution digital thermometer IC with a unique 64-bit address. The click is designed to run on a 3.3V power supply. The board communicates with the target microcontroller through a 1-wire interface. Using the onboard jumper you can select between two outputs: GP1 (default mikroBUS™ AN pin), and GPO (default PWM pin).
Temperature range
The sensor aboard the Thermo 2 Click Board™ measures temperature within a range from –10°C to 85°C with ±0.5°C accuracy .
DS1825 Digital Thermometer
You can specify the resolution of the measurements, from 9 to 12-bit, depending on the application. Because each DS1825 has a unique 64-bit serial code, many of them can function on the same 1-wire bus.
The 4-bit location address lets you set up a unique ID for up to 16 sensors that operate on a single 1-Wire bus.
Onboard jumpers
The board features a set of four onboard jumpers (zero ohm resistors) for specifying a unique address for the sensor.
A separate jumper lets you select the sensor's output between GP1 and GP0 pins.
The Thermo 2 Click Board™ also features four Address Select jumpers for setting a unique ID for the sensor (allowing for up to 16 sensors to operate on a single 1-Wire bus).
Key Features
- DS1825 digital thermometer
- ±0.5°C accuracy from -10°C to +85°C
- Thermometer Resolution is User-Selectable from 9 to 12 Bits
- Alarm function (user-programmable)
- Interface: AN, PWM
- 3.3V power supply
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.