Lineeye Co Ltd
Lineeye SI-60-E LAN to RS-232C Interface Converter
Lineeye SI-60-E LAN to RS-232C Interface Converter
Couldn't load pickup availability
Overview
The Lineeye SI-60-E is an interface converter to connect factory automation equipment and analyzers, which only have the RS-232C serial communication port, to LAN. The built-in Lantronix Xport® on the LAN interface converts RS-232C data into LAN protocol (TCP/IP). The device supports a 35mm DIN rail and a wide range of operating temperatures. Therefore, you can use it for factory automation without worry.
■Block Chart
RS-232C connector pin arrangement
| Pin *1 | Signal | I/O *2 | |
|---|---|---|---|
| DTE | DCE | ||
| 1 | FG | - | - |
| 2 | SD | Out | In |
| 3 | RD | In | Out |
| 4 | RS (RTS) | Out | In |
| 5 | CS (CTS) | In | Out |
| 6 | DR (DSR) *3 | In | In |
| 7 | GND | - | - |
| 9 | +DC IN *4 | - | - |
| 20 | ER (DTR) *3 | In | In |
*1: Pins not listed here are not connected. *2: The DTE/DCE selector switch changes In and Out. *3: Pins 6 and 20 are internally connected in this unit. *4: Power can be supplied from this pin when the AC adapter is not used.
■Example of SI-60 Connection
Attached software (COM port Redirector TM ) controls the RS-232C device as if it is connecting directly to the serial port (COM1 to n) of PC. This reduces the modification of communication programs. Also, you can transmit/receive RS-232C serial data directly using the TCP/IP socket communication method.
■Locate RS-232C devices to further place using LAN cable
2sets of SI-60 makes it possible to locate the RS-232C devices in the far place using LAN cable. One set of SI-60 has to be in Server mode (or Server and Client mode) and the other one has to be in Client mode (or Server and Client) mode.
■Connection with LINEEYE analyzer
By connecting the LINEEYE analyzers to LAN (Ethernet) using SI-60, you can analyze the data on a PC in the office far from the workplace in real time, continuously measuring the data between the device A and B.
■Space-saving
Able to install the device on the 35mm DIN rail using Optional DIN plate (SI-DIN70), and to install it on the wall using the optional wall bracket (SI-WM1).
DIN Rail Installation Example
Optional "Metal Fitting for Wall"
■2 kinds of power input
Able to supply the power from attached AC adapter. Supplying power from Dsub 9pin of device via RS-232C device eliminates the use of AC adapter and saves space.
■A Useful Tool for Multiple Operation
SILANIOinit is a configuration tool for LINEEYE products embedded WiPort-NR. It is useful and saves time to rewrite the WiPort-NR configuration file (Setup Record) .
［ Functions ］
- Searches the device on the Network. Displays the MAC address.
- Reads and saves the configuration (set-up record) of converter.
- Writes to the set-up record of selected converter.
- Sets the IP address of selected converter.
Configuration tool (SILANIOinit)
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.