Thermo 26 Click Board
Thermo 26 Click Board
Key Features:
- Low power consumption, high precision, I2C interface, temperature sensor in the STS31-DIS is the chip itself, resolution of 0.01°C, high accuracy, high reliability and long-term stability, and more
- Based on the STS31-DIS - digital temperature sensor from Sensirion
- Can be used for the thermal management of various consumer, industrial, and environmental applications
- mikroBUS: I2C Interface
The Thermo 26 Click Board™ is a compact add-on board that accurately measures temperature. This board features the STS31-DIS, a high-accuracy digital temperature sensor from Sensirion. Characterized by its high accuracy (up to ±0.2°C typical) and high resolution of 0.01°C, the STS31-DIS provides temperature data to the host controller with a configurable I2C interface. It relies on the industry-proven CMOSens® technology, providing increased intelligence, reliability, and improved accuracy specifications, including enhanced signal processing, user-selectable I2C addresses, and up to 1 MHz communication speeds. This Click board™ is suitable for the thermal management of various consumer, industrial, and environmental applications.
The Thermo 26 Click Board™ is supported by a mikroSDK-compliant library, which includes functions that simplify software development. This Click board™ comes as a thoroughly tested product, ready to be used on a system equipped with the mikroBUS™ socket.
Software Support
We provide a library for the Thermo 26 Click Board™ as well as a demo application (example), developed using MikroE compilers. The demo can run on all the main MikroEdevelopment boards.
The package can be downloaded/installed directly from NECTO Studio The package Manager(recommended), downloaded from our LibStock™ or found on MikroE Github account.
Library Description
This library contains API for the Thermo 26 Click Board™ driver.
Key functions
-
thermo26_read_serial_num
This function reads the 32-bit unique serial number. -
thermo26_start_measurement
This function starts the measurements by sending the specified command. -
thermo26_read_temperature
This function reads the temperature raw data measurements and converts it to degrees Celsius.
Example Description
This example demonstrates the use of the Thermo 26 Click Board™ by reading and displaying the temperature measurements.
void application_task ( void )
{
float temperature;
if ( THERMO26_OK == thermo26_read_temperature ( &thermo26, &temperature ) )
{
log_printf ( &logger, " Temperature: %.2frnn", temperature );
}
Delay_ms ( 1000 );
}
The full application code, and ready to use projects can be installed directly from NECTO Studio The package Manager(recommended), downloaded from our LibStock™ or found on MikroE Github account.
Other MikroE Libraries used in the example:
- MikroSDK.Board
- MikroSDK.Log
- Click.Thermo26
Additional Notes and Information
Depending on the development board you are using, you may need a USB UART Click Board™, USB UART 2 Click or RS232 Click to connect to your PC for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.
MIKROSDK
The Thermo 26 Click Board™ is supported with mikroSDK – MikroElektronika’s Software Development Kit. mikroSDK should be downloaded from the LibStock™ and installed for the compiler you are using to ensure proper operation of mikroSDK compliant Click board™ demo applications.
Thermo 26 Click Board
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.