Mikroelektronika d.o.o.
Relais 3 Click-Platine
Relais 3 Click-Platine
Verfügbarkeit für Abholungen konnte nicht geladen werden
Das Relay 3 Click Board™ ist ein Dual-Relais-Click Board™ mit zwei einpoligen Doppel-Umschaltrelais, die über Ausgangsstifte des Host-Mikrocontrollers (MCU) betrieben werden können. Es bietet eine elegante und einfache Lösung zur Steuerung einer Vielzahl von Stromversorgungsanwendungen. Zwei SRD-5VDC-SL-C-Relais, die auf diesem Click Board™ verwendet werden, sind hermetisch abgedichtete Relais, die 5 V über ihre Spulen benötigen und im aktiven Zustand etwa 0,4 W verbrauchen. Sie ermöglichen bis zu 28 VDC über die angeschlossene Last und leiten bis zu 7 A.
Relay 3 Click Board™ kann in verschiedenen SPS-basierten Systemen, als Remote-Ein/Aus-Schalter und anderen ähnlichen Anwendungen verwendet werden.
Besides two relays, the Relay 3 Click Board™ contains all the necessary electronic components for driving the relay coils. Two LED indicators provide visual feedback about the activity of the relays. Although it can withstand up to 7A through its contacts, the life expectancy of the relay drops proportionally with the current through the contacts. Therefore, Relay 3 click is a good solution for power or signal switching in a range of low to medium power applications, including domestic appliances, office machines, audio equipment, etc.
How Does The Relay 3 Click Board™ Work?
The Relay 3 Click Board™ features two SRD-05VDC-SL-C small-size relays, from Songle Relays. These are reliable relays in sealed a plastic housing, offering good isolation. Despite its size, the SRD-05VDC-SL-C relay is able to withstand up to 7A and 220V AC/28V DC. It can endure up to 10 5 operations while loaded, and even up to 10 7 with no load applied. This relay is of a single-pole-double-throw type: when the coil is energized, it will attract the internal switching elements and close one of the contacts, while opening the other contact at the same time. Normally Closed contacts are usually labelled with NC, while Normally Open contacts are labelled as NO.
These relays are designed so that their coils can be easily activated by relatively low currents and voltages. The SRD-05VDC-SL-C relay can be operated with 5V, making it a good choice for activating it by an MCU pin. However, to provide sufficient current for the activation, an additional MOSFET has to be used. Gates of two MOSFETS (one for each relay) are controlled by the MCU pins, therefore are routed to the mikroBUS™. The gates are routed to RST and CS pins of the mikroBUS™ and are labelled as RE1 and RE2, respectively.
There are two LEDs (yellow) that are used to indicate the activity state of the relay. When the current flows through the MOSFET, the coil will be energized, and the relay will be activated. This current also flows through these LEDs, indicating that the relay is active. The LEDs are labelled according to the relay they are connected to: REL1 for Relay 1, and REL2 for Relay 2.
A Schottky diode is connected across the relay coil, preventing the back-EMF which can be generated because of the inert nature of the coil. The back EMF can have an adverse effect on the circuit and can potentially damage the control circuit. The diode is connected in the inverse direction, allowing the back-EMF to discharge through the relay coil, instead.
Each relay is equipped with a 3-pole screw terminal, rated for up to 6A. Therefore, the maximum current through the connected load should not exceed this value. However, as already mentioned above, a high current negatively affects the life expectance of the relay itself, so switching large currents should be avoided. The middle pole of the screw terminal is connected to the common terminal of the relay (COM) while two other poles are the NC and NO contacts of the relay. Having both NC and NO contacts is useful, expanding the implementation possibilities of Relay 3 click.
DO NOT TOUCH THE BOARD WHILE THE EXTERNAL POWER SUPPLY IS ON!
Note : Relay 3 click has exposed pins/pads. To stay safe take precautions when applying high voltage to the click. The click is to be used by trained personnel only when applying high voltage.
SPECIFICATIONS
| Type | Relay |
| Applications | Relay 3 click is a good solution for power or signal switching in a range of low to medium power applications, including domestic appliances, office machines, audio equipment, etc. |
| On-board modules | SRD-05VDC-SL-C, small-size sealed relays from Songle Relay |
| Key Features | Two small-sized SPDT relays in a sealed plastic housing. LED indicators for indicating the activity of each relay. Screw terminals allow secure connection of the load. Protection from back-EMF generated as a result of the coil inductance. |
| Interface | GPIO |
| Compatibility | mikroBUS |
| Click board size | L (57.15 x 25.4 mm) |
| Input Voltage | 5V |
PINOUT DIAGRAM
This table shows how the pinout on the Relay 3 Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
| Notes | Pin |  |
Pin | Notes | |||
|---|---|---|---|---|---|---|---|
| NC | 1 | AN | PWM | 16 | NC | ||
| RE1 | RST | 2 | RST | INT | 15 | NC | |
| RE2 | CS | 3 | CS | RX | 14 | NC | |
| NC | 4 | SCK | TX | 13 | NC | ||
| NC | 5 | MISO | SCL | 12 | NC | ||
| NC | 6 | MOSI | SDA | 11 | NC | ||
| NC | 7 | 3.3V | 5V | 10 | +5V | Power Supply | |
| Ground | GND | 8 | GND | GND | 9 | GND | Ground |
RELAY 3 CLICK MAXIMUM RATINGS
| Description | Min | Typ | Max | Unit |
|---|---|---|---|---|
| Operational Current Range (28V DC / 220V AC) | 0 | - | 6 | A |
| Operational Voltage Range (AC) | 0 | - | 220 | V |
| Operational Voltage Range (DC) | 0 | - | 28 | V |
| Mechanical Endurance | 0 | - | 100,000 | operations |
ONBOARD SETTINGS AND INDICATORS
| Label | Name | Default | Description |
|---|---|---|---|
| LD1 | PWR | - | Power indicator LED |
| LD2 | REL1 | - | Relay 1 activity LED indicator |
| LD3 | REL2 | - | Relay 2 activity LED indicator |
Software Support
We provide a library for the Relay 3 Click Board™ on our LibStock page, as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Library Description
The library contains functions for turning on/off relays 1 and 2. The library contains functions for turning on/off relays 1 and 2 after a defined period of time.
Key Functions
void relay3_relayOn( uint8_t relay_ )- Turns selected relay on.void relay3_relayOff( uint8_t relay_ )- Turns selected relay off.void relay3_onDelay( uint8_t relay_, uint8_t units_, uint16_t time_ )- Turns selected relay on after a defined period of time in selected units of time.void relay3_offDelay( uint8_t relay_, uint8_t units_, uint16_t time_ )- Turns selected relay off after a defined period of time in selected units of time.
Example Description
The application is composed of three sections :
- System Initialization - Initializes LOG functionality, initializes RST and CS pins as OUTPUTs.
- Application Initialization - Initializes GPIO driver.
- Application Task - Activates relays 1 and/or 2 based on user input.
void applicationTask( )
{
dataReady = UART_Rdy_Ptr( );
if (dataReady != 0)
{
receivedData = UART_Rd_Ptr( );
switch (receivedData)
{
case '1' :
{
relay3_case1( );
break;
}
case '2' :
{
relay3_case2( );
break;
}
case '3' :
{
relay3_case3( );
break;
}
default :
{
mikrobus_logWrite( "wrong command", _LOG_LINE );
break;
}
}
}
}
Additional Functions
void relay3_case1()- Turns relay 1 on/offvoid relay3_case2()- Turns relay 2 on/offvoid relay3_case3()- Turns relay 3 on/off
The full application code, and ready to use projects can be found on our LibStock page.
Other mikroE Libraries used in the example:
UART
Additional Notes and Information
Depending on the development board you are using, you may need a USB UART click, USB UART 2 click or RS232 click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all MikroElektronika compilers, or any other terminal application of your choice, can be used to read the message.
Relais 3 Click-Platine
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.