Smart Buck 3 Klickbrett
Smart Buck 3 Klickbrett
Key Features:
- Höchste Effizienz, hervorragende DC-Ausgangsspannungsregelung, Sanftanlauf, programmierbare Anstiegsrate beim Spannungsübergang, Überstromschutz, Eingangsunterspannungserkennung/-sperre und mehr
- Basierend auf dem TPS62366A – hochfrequenter synchroner Abwärts-DC-DC-Wandler von Texas Instruments
- Kann für die Entwicklung von DSP-Netzteilen, tragbaren Geräten, dynamischer Spannungsskalierung und mehr verwendet werden
- mikroBUS: I2C-Schnittstelle
Das Smart Buck 3 Click Board™: Energieeffizienz auf Knopfdruck
Wir präsentieren das Smart Buck 3 Click Board™, die kompakte Zusatzplatine, die Ihren Stromversorgungsbedarf revolutioniert. Dieses hochmoderne Gerät bringt Ihre Projekte mit seinem hochfrequenten synchronen DC-DC-Abwärtswandler auf ein neues Niveau.
Effizientes Energiemanagement leicht gemacht
Angetrieben vom TPS62366A von Texas Instruments bietet das Smart Buck 3 Click Board™ beispiellose Leistung und Vielseitigkeit. Seine I2C-kompatible Schnittstelle und Remote-Sense-Funktion ermöglichen eine nahtlose Integration in Ihr System.
Flexibler Eingangs- und Ausgangsbereich
Das Smart Buck 3 Click Board™ akzeptiert Eingangsspannungen von 2,5 V bis 5,5 V und unterstützt verschiedene Stromquellen, einschließlich gängiger Batterietechnologien. Was den Ausgang betrifft, kann der Konverter die Spannung von 0,5 V bis 1,77 V in präzisen 10-mV-Schritten skalieren und liefert dabei einen beeindruckenden Spitzenausgangsstrom von bis zu 2,5 A.
Schnelle und stabile Leistung
Erleben Sie einen reibungslosen Betrieb mit dem Smart Buck 3 Click Board™. Sein fortschrittliches Design gewährleistet eine typische Schaltfrequenz von 2,5 MHz, garantiert eine optimale Stromversorgung und minimiert Leistungseinbußen.
Lassen Sie Ihrer Kreativität freien Lauf
Egal, ob Sie an DSP-Netzteilen, tragbaren Geräten oder dynamischer Spannungsskalierung arbeiten, das Smart Buck 3 Click Board™ ist die ultimative Lösung. Nutzen Sie den kompakten Formfaktor und die robusten Funktionen, um Ihre Projekte zum Leben zu erwecken.
Nahtlose Integration mit mikroSDK
Genießen Sie problemlose Softwareentwicklung mit dem Smart Buck 3 Click Board™. Dieses innovative Gerät wird von einer mikroSDK-kompatiblen Bibliothek unterstützt und bietet eine Reihe von Funktionen, die Ihre Codierungsaufgaben vereinfachen. Beginnen Sie selbstbewusst mit dem Aufbau Ihres Traumsystems.
Bereit zum Einschalten?
Das Smart Buck 3 Click Board™ wird vollständig getestet geliefert und kann in jedes System integriert werden, das mit der mikroBUS™-Buchse ausgestattet ist. Lassen Sie sich diese außergewöhnliche Energiemanagementlösung nicht entgehen – entfesseln Sie noch heute das Potenzial Ihrer Projekte!
How Does The Smart Buck 3 Click Board™ Work?
The Smart Buck 3 Click Board™ is based on the TPS62366A, a processor supply with I2C compatible interface and a remote sense from Texas Instruments. Its dedicated inputs over the VIN terminal allow fast voltage transition while introducing input under voltage detection and lockout. In addition, it features over-temperature protection, a soft start, excellent DC output voltage regulation, and other robust operation/protection features. It offers a high-efficiency step-down conversion, with the highest efficiency towards low and highest output currents. This way, it increases the battery ON-time.
The TPS62366A uses the DCS-Control™ architecture and fully differential sensing to achieve precise static and dynamic transient output voltage regulation. This way, the output voltage security margins can be kept small. The used architecture supports PWM mode for medium and heavy load conditions and a Power Save mode for light loads. During the PWM mode, it works at the 2.5MHz frequency, and as the load decreases, the TPS62366A enters a Power Save mode (on this board set at 1.16V). This transition is seamless and does not affect output voltage transients.
In addition, the TPS62366A incorporates internal soft-start circuitry, which controls the output voltage ramp-up after enabling the device by eliminating the inrush current. The converter avoids excessive voltage drops of primary cells and rechargeable batteries with high internal impedance. During this procedure, the output voltage is monotonically ramped up to the threshold of the minimum programmable output voltage and further increases by the ramp rate settings to the programmed output voltage.
The Smart Buck 3 Click Board™ uses a standard 2-Wire I2C interface to communicate with the host MCU supporting Standard, Fast, and High-speed modes with a frequency of up to 3.4MHz. The I2C address is fixed and can not be changed.
This Click board™ can only be operated with a 3.3V logic voltage level. The board must perform appropriate logic voltage level conversion before using MCUs with different logic levels. However, the Click board™ comes equipped with a library containing functions and an example code that can be used, as a reference, for further development.
SPECIFICATIONS
Type | Buck |
Applications | It can be used for the development of DSPs power supplies, portable devices, dynamic voltage scaling, and more |
On-board modules | TPS62366A - high-frequency synchronous step-down DC-DC converter from Texas Instruments |
Key Features | Highest efficiency, excellent DC output voltage regulation, soft start, programmable slew rate at voltage transition, over current protection, input under voltage detection/lock-out, and more |
Interface | I2C |
Compatibility | mikroBUS |
Click board size | M (42.9 x 25.4 mm) |
Input Voltage | 3.3V |
PINOUT DIAGRAM
This table shows how the pinout on Smf the Smart Buck 3 Click Board™corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
Notes | Pin | Pin | Notes | ||||
---|---|---|---|---|---|---|---|
NC | 1 | AN | PWM | 16 | NC | ||
NC | 2 | RST | INT | 15 | NC | ||
NC | 3 | CS | RX | 14 | NC | ||
NC | 4 | SCK | TX | 13 | NC | ||
NC | 5 | MISO | SCL | 12 | SCL | I2C Clock | |
NC | 6 | MOSI | SDA | 11 | SDA | I2C Data | |
Power Supply | 3.3V | 7 | 3.3V | 5V | 10 | NC | |
Ground | GND | 8 | GND | GND | 9 | GND | Ground |
ONBOARD SETTINGS AND INDICATORS
Label | Name | Default | Description |
---|---|---|---|
LD1 | PWR | - | Power LED Indicator |
SMART BUCK 3 CLICK ELECTRICAL SPECIFICATIONS
Description | Min | Typ | Max | Unit |
---|---|---|---|---|
Supply Voltage | - | 3.3 | - | V |
Input Voltage Range | 2.5 | - | 5.5 | V |
Output Voltage Range | 0.7 | - | 1.77 | V |
Output Current | - | - | 2.5 | A |
Software Support
We provide a library for the SSmart Buck 3 Click Board™ and a demo application (example) developed using MIKROE compilers. The demo can run on all the main MIKROE development boards.
The package can be downloaded/installed directly from NECTO Studio The package Manager (recommended), downloaded from our LibStock™ or found on MikroE Github account.
Library Description
This library contains API for the Smart Buck 3 Click Board™ driver.
Key functions
-
smartbuck3_set_voltage
Smart Buck 3 set voltage function. -
smartbuck3_get_voltage
Smart Buck 3 get voltage function. -
smartbuck3_set_operation_mode
Smart Buck 3 set operation mode function.
Example Description
This example demonstrates the use of the Smart Buck 3 Click Board™. This driver provides functions for device configurations and for the sets and reads the output voltage.
void application_task ( void )
{
if ( SMARTBUCK3_OK == smartbuck3_set_voltage( &smartbuck3, vout_mv ) )
{
Delay_ms( 100 );
if ( SMARTBUCK3_OK == smartbuck3_get_voltage( &smartbuck3, &vout_mv ) )
{
log_printf ( &logger, " Vout: %u mVrn", vout_mv );
}
}
vout_mv += 100;
if ( vout_mv > SMARTBUCK3_VOUT_MAX )
{
vout_mv = SMARTBUCK3_VOUT_MIN;
}
Delay_ms( 3000 );
}
The full application code, and ready to use projects can be installed directly from NECTO Studio The package Manager (recommended), downloaded from our LibStock™ or found on MikroE Github account.
Other MikroE Libraries used in the example:
- MikroSDK.Board
- MikroSDK.Log
- Click.SmartBuck3
Additional Notes and Information
Depending on the development board you are using, you may need USB UART Click Board™, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MIKROE compilers.
MIKROSDK
Thie Smart Buck 3 Click Board™ is supported with mikroSDK - MIKROE Software Development Kit, which needs to be downloaded from the LibStock and installed for the compiler you are using to ensure proper operation of mikroSDK compliant Click board™ demo applications.
Smart Buck 3 Klickbrett
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.