UART MUX 4 Click-Platine
UART MUX 4 Click-Platine
Key Features:
- Schnelle Ein- und Ausschaltzeiten, zwei UART-Ausgangsschnittstellen, 3,3-V- und 5-V-Betrieb, Klemmdioden an den Eingängen, CMOS-Ebene, ESD-Schutz und mehr
- Basierend auf dem 74HC4066D - vierfach einpoliger, einstufiger Analogschalter von Nexperia
- Kann für die Entwicklung einer breiten Palette von Anwendungen verwendet werden, von Industrie- und Instrumentierungsanwendungen bis hin zu Verbraucher-, Kommunikations- und Datenerfassungssystemen und vielen mehr
- mikroBUS: UART-Schnittstelle
Entfesseln Sie die Leistung der Konnektivität mit dem UART MUX 4 Click Board™
Erweitern Sie Ihr technologisches Toolkit mit dem UART MUX 4 Click Board™. Diese schlanke und kompakte Zusatzplatine wurde entwickelt, um Ihre Projekte auf ein neues Niveau zu heben, indem die UART-Pins (RX und TX) von der mikroBUS™-Buchse auf einen der beiden verfügbaren Ausgänge umgeschaltet werden. In diesem hochfunktionalen Gerät finden Sie den 74HC4066D – einen robusten, vierpoligen, einstufigen Analogschalter von Nexperia.
Erleben Sie nahtloses Umschalten wie nie zuvor
Mit dem UART MUX 4 Click Board™ können Sie ganz bequem von einem Multiplex-UART zu einem anderen wechseln. Beachten Sie jedoch, dass gleichzeitiges Wechseln nicht unterstützt wird. Dieses Click Board™ ist eine außergewöhnliche Lösung für viele Anwendungen. Ob für industrielle Zwecke, Instrumentierung, verbraucherbasierte Kommunikation, Datenerfassungssysteme oder mehr, Sie haben die Lösung!
Unterstützt durch eine robuste mikroSDK-kompatible Bibliothek
Eine mikroSDK-kompatible Bibliothek unterstützt das UART MUX 4 Click Board™ und macht die Softwareentwicklung zum Kinderspiel. Diese umfassende Funktion bietet eine Vielzahl von Funktionen, die Ihren Entwicklungsprozess vereinfachen und Ihre kreative Reise reibungsloser und angenehmer gestalten können.
Gebrauchsfertiges, vollständig getestetes Produkt
Keine Sorge: Das UART MUX 4 Click Board™ ist ein vollständig getestetes Produkt und einsatzbereit auf einem System mit mikroBUS™-Buchse. Es ist an der Zeit, Ihr Technikerlebnis mit dem UART MUX 4 Click Board™ zu revolutionieren!
How Does The UART MUX 4 Click Board™ Work?
The UART MUX 4 Click Board™ is based on the 74HC4066D, a quad single-pole, single-throw analogue switch from Nexperia. The CMOS level inputs of the 74HC4066D include clamp diodes, which in turn allow current limiting resistors to interface inputs to voltages exceeding VCC. This Click board™ has two multiplexed 4-pin UART headers labelled UART1 and UART2. The UART header lines are labelled for corresponding pins. It offers fast switching speeds with a turn-OFF time of 13ns and 11ns for turn-ON if powered with 5V.
The UUART MUX 4 Click Board™ uses a standard UART interface to communicate with the host MCU, with commonly used RX and TX lines. To switch between the two output UART interfaces, this Click board™ features a switch in the form of an NPN transistor circuit. This switch circuit allows using one of the outputs UART interfaces via the SW pin of the mikroBUS™ socket with a simple logic state.
This Click board™ can operate with either 3.3V or 5V logic voltage levels selected via the VCC SEL jumper. This way, both 3.3V and 5V capable MCUs can use the communication lines properly. However, the Click board™ comes equipped with a library containing easy-to-use functions and an example code that can be used, as a reference, for further development.
SPECIFICATIONS
Type | Port expander, RS-232 |
Applications | It can be used for the development of a wide range of applications, from industrial and instrumentation to consumer, communications, data-acquisition systems, and many more |
On-board modules | 74HC4066D - quad single-pole, single-throw analogue switch from Nexperia |
Key Features | Fast turn-ON and turn-OFF times, two output UART interfaces, 3.3V and 5V operation, clamp diodes included on inputs, CMOS level, ESD protection, and more |
Interface | UART |
Compatibility | mikroBUS |
Click board size | S (28.6 x 25.4 mm) |
Input Voltage | 3.3V or 5V |
PINOUT DIAGRAM
This table shows how the pinout of the UART MUX 4 Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
Notes | Pin | Pin | Notes | ||||
---|---|---|---|---|---|---|---|
NC | 1 | AN | PWM | 16 | NC | ||
UART Output Switch | SW | 2 | RST | INT | 15 | NC | |
NC | 3 | CS | RX | 14 | TX | UART TX | |
NC | 4 | SCK | TX | 13 | RX | UART RX | |
NC | 5 | MISO | SCL | 12 | NC | ||
NC | 6 | MOSI | SDA | 11 | NC | ||
Power Supply | 3.3V | 7 | 3.3V | 5V | 10 | 5V | Power Supply |
Ground | GND | 8 | GND | GND | 9 | GND | Ground |
ONBOARD SETTINGS AND INDICATORS
Label | Name | Default | Description |
---|---|---|---|
LD1 | PWR | - | Power LED Indicator |
JP1 | VCC SEL | Left | Power/Logic Voltage Level Selection 3V3/5V: Left position 3V3, Right position 5V |
UART MUX 4 CLICK ELECTRICAL SPECIFICATIONS
Description | Min | Typ | Max | Unit |
---|---|---|---|---|
Supply Voltage | 3.3 | 5 | V |
Software Support
We provide a library for the UART MUX 4 Click Board™ as well as a demo application (example), developed using MIKROE compilers. The demo can run on all the main MIKROE development boards.
The package can be downloaded/installed directly from NECTO Studio. The package Manager (recommended), from our LibStock™ or found on the MikroE Github account.
Library Description
This library contains API for UART MUX 4 Click driver.
Key functions
-
uartmux4_enable_uart1
UART MUX 4 enable the UART 1 function. -
uartmux4_enable_uart2
UART MUX 4 enable the UART 2 function.
Example Description
This example demonstrates using the UART MUX 4 Click Board™ by processing the incoming data and displaying them on the USB UART.
void application_task ( void )
{
if ( uartmux4_generic_write ( &uartmux4, DEMO_MESSAGE, sizeof( DEMO_MESSAGE ) ) )
{
if ( UARTMUX4_OK == uartmux4_process( &uartmux4 ) )
{
log_printf( &logger, "%s", app_buf );
uartmux4_clear_app_buf( );
}
}
Delay_ms( 2000 );
}
The full application code, and ready to use projects can be installed directly from NECTO Studio The package Manager (recommended), downloaded from our LibStock™ or found on MikroE Github account.
Other MikroE Libraries used in the example:
- MikroSDK.Board
- MikroSDK.Log
- Click.UARTMUX4
Additional Notes and Information
Depending on the development board you are using, you may need USB UART Click Board™, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MIKROE compilers.
MIKROSDK
The UART MUX 4 Click Board™ is supported with mikroSDK - MIKROE Software Development Kit. To ensure proper operation of mikroSDK compliant Click board™ demo applications, mikroSDK should be downloaded from the LibStock and installed for the compiler you are using.
UART MUX 4 Click-Platine
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.