Thermo 29 Click Board
Thermo 29 Click Board
Key Features:
- Hohe Genauigkeit, breiter Temperaturbereich, hohe Auflösung, SPI-Schnittstelle, schnelle Messintervalle ohne Selbsterhitzung, erweiterte Funktionen für erhöhte Zuverlässigkeit, programmierbarer Alarm, werkseitig kalibriert, geringer Stromverbrauch und mehr
- Basierend auf dem TMP126 - Temperatursensor mit digitalem Ausgang von Texas Instruments
- Kann für das Wärmemanagement tragbarer elektronischer Geräte sowie für Industrie-, Verbraucher- und Umweltanwendungen verwendet werden
- mikroBUS: SPI-Schnittstelle
Das Thermo 29 Click Board™: Genaue Temperaturmessungen leicht gemacht
Das Thermo 29 Click Board™ ist die perfekte Lösung für alle, die präzise und zuverlässige Temperaturmessungen benötigen. Mit seinem kompakten Design und den erweiterten Funktionen ist dieses Board ein Muss für verschiedene Anwendungen.
Überlegene Genauigkeit mit dem TMP126-Sensor
Das Herzstück des Thermo 29 Click Board™ ist der TMP126, ein außergewöhnlicher digitaler Temperatursensor von Texas Instruments. Dieser hochpräzise Sensor kombiniert einen intern kalibrierten thermischen BJT-Sensor, einen 14-Bit-ADC und einen digitalen Signalprozessor, um eine beispiellose Genauigkeit zu bieten.
Mit einer beeindruckenden Genauigkeit von ±0,25 °C und einer Temperaturauflösung von 0,03125 °C pro LSB sorgt das TMP126 dafür, dass Sie sich auf präzise Temperaturmessungen verlassen können. Ganz gleich, ob Sie industrielle Prozesse überwachen, das Wärmemanagement in elektronischen Geräten optimieren oder an Umweltanwendungen arbeiten, das Thermo 29 Click Board™ ist für Sie da.
Bleiben Sie wachsam mit der programmierbaren Alarmfunktion
Das Thermo 29 Click Board™ geht über die Temperaturmessung hinaus und bietet eine programmierbare Alarmfunktion. Mit dieser Funktion können Sie bestimmte Temperaturschwellenwerte festlegen und bei Überschreiten dieser Schwellenwerte Interruptsignale auf Ihrer Mikrocontrollereinheit (MCU) empfangen.
Mithilfe der programmierbaren Alarmfunktion können Sie umgehend auf kritische Temperaturereignisse reagieren und entsprechende Maßnahmen ergreifen. Ob es darum geht, eine Überhitzung in tragbaren elektronischen Geräten zu verhindern oder optimale Betriebsbedingungen in industriellen Systemen aufrechtzuerhalten – mit dem Thermo 29 Click Board™ behalten Sie die Kontrolle.
Vereinfachte Softwareentwicklung mit MikroSDK-Unterstützung
Dank der mikroSDK-kompatiblen Bibliothek ist die Entwicklung von Software für das Thermo 29 Click Board™ ein Kinderspiel. Diese umfassende Bibliothek bietet eine Reihe von Funktionen, die die Integration des Click Board™ in Ihr System vereinfachen.
Durch die Verwendung der mikroSDK-kompatiblen Bibliothek können Sie bei der Softwareentwicklung wertvolle Zeit und Aufwand sparen. Das Thermo 29 Click Board™ ist ein vollständig getestetes und gebrauchsfertiges Produkt, das ein nahtloses Erlebnis bei der Integration in jedes System gewährleistet, das mit der beliebten mikroBUS™-Buchse ausgestattet ist.
Geben Sie sich nicht mit weniger als genauen und zuverlässigen Temperaturmessungen zufrieden. Holen Sie sich das Thermo 29 Click Board™ noch heute und erleben Sie den Unterschied, den es beim Wärmemanagement in verschiedenen Anwendungen macht!
How Does The Thermo 29 Click Board™ Work?
The Thermo 29 Click Board™ is based on the TMP126, a digital output temperature sensor from Texas Instruments with increased reliability and improved accuracy specifications optimal for thermal management and protection applications. The TMP126 consists of an internal thermal BJT (factory calibrated on a NIST traceable setup), a high-resolution analog-to-digital converter (ADC), a data processing circuit, and serial interface logic functions in one package. The voltage is digitized and converted to a 14-bit temperature result in degrees Celsius, giving a fully calibrated digital output with outstanding accuracy of up to ±0.25°C and temperature resolution of 0.03125°C per LSB, typical over a temperature range of 20°C to 30°C.
This Click board™ communicates with MCU using a 3-wire SPI-compatible interface with a maximum frequency of 10MHz, for data transfer and configuration of the TMP126. Using the Mode bit in the configuration register, the TMP126 can be configured to operate in various conversion modes, including continuous, one-shot, and shutdown modes. These modes provide flexibility to use the board in the most power-efficient way necessary for the intended application.
The TMP126 also includes advanced features for increased reliability in harsh environments. These include an optional CRC checksum for data integrity, programmable alert limits, a temperature slew rate warning, and an enhanced operating temperature range. An alarm (interrupt) signal, marked as ALR and routed to the interrupt pin of the mikroBUS™ socket, is alarming when a specific temperature event occurs that depends on the value of the temperature reading relative to programmable limits. In addition to the ALR pin, this function can be visually identified by a red LED marked as ALERT.
The Thermo 29 Click Board™ can operate with either 3.3V or 5V logic voltage levels selected via the VCC SEL jumper. This way, it is allowed for both 3.3V and 5V capable MCUs to use the communication lines properly. However, the Click board™ comes equipped with a library containing easy-to-use functions and an example code that can be used, as a reference, for further development.
SPECIFICATIONS
Type | Temperature & humidity |
Applications | Can be used for the thermal management of portable electronics and industrial, consumer, and environmental applications |
On-board modules | TMP126 - digital output temperature sensor from Texas Instruments |
Key Features | High accuracy, broad temperature range, high resolution, SPI interface, fast measurement intervals with no self-heating, advanced features for increased reliability, programmable alert, factory-calibrated, low power consumption, and more |
Interface | SPI |
Compatibility | mikroBUS |
Click board size | S (28.6 x 25.4 mm) |
Input Voltage | 3.3V or 5V |
PINOUT DIAGRAM
This table shows how the pinout on Thermo 29 Click corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
Notes | Pin | Pin | Notes | ||||
---|---|---|---|---|---|---|---|
NC | 1 | AN | PWM | 16 | NC | ||
NC | 2 | RST | INT | 15 | ALR | Alert Interrupt | |
SPI Chip Select | CS | 3 | CS | RX | 14 | NC | |
SPI Clock | SCK | 4 | SCK | TX | 13 | NC | |
SPI Data OUT | SDO | 5 | MISO | SCL | 12 | NC | |
SPI Data IN | SDI | 6 | MOSI | SDA | 11 | NC | |
Power Supply | 3.3V | 7 | 3.3V | 5V | 10 | 5V | Power Supply |
Ground | GND | 8 | GND | GND | 9 | GND | Ground |
ONBOARD SETTINGS AND INDICATORS
Label | Name | Default | Description |
---|---|---|---|
LD1 | PWR | - | Power LED Indicator |
LD2 | ALERT | - | Alert LED Indicator |
JP1 | VCC SEL | Left | Logic Level Voltage Selection 3V3/5V: Left position 3V3, Right position 5V |
THERMO 29 CLICK ELECTRICAL SPECIFICATIONS
Description | Min | Typ | Max | Unit |
---|---|---|---|---|
Supply Voltage | 3.3 | - | 5 | V |
Temperature Accuracy | -0.3 | - | 0.3 | deg |
Temperature Resolution | - | 0.03125 | - | °C/LSB |
Temperature Range | -20 | +25 | +85 | °C |
Software Support
We provide a library for the Thermo 29 Click Board™ as well as a demo application (example), developed using MikroE compilers. The demo can run on all the main MikroE development boards.
The package can be downloaded/installed directly from NECTO Studio The package Manager (recommended), downloaded from our LibStock™ or found on MikroE Github account.
Library Description
This library contains API for the Thermo 29 Click Board™ driver.
Key functions
-
thermo29_read_unique_id
This function reads the device unique ID words (6 bytes in total). -
thermo29_get_alert_pin
This function returns the alert pin logic state. -
thermo29_read_temperature
This function reads the temperature measurement in degrees Celsius.
Example Description
This example demonstrates the use of the Thermo 29 Click Board™ by reading and displaying the temperature measurements.
void application_task ( void )
{
float temperature;
// Wait for the data ready alert flag
while ( thermo29_get_alert_pin ( &thermo29 ) );
if ( ( THERMO29_OK == thermo29_clear_alert_status ( &thermo29 ) ) &&
( THERMO29_OK == thermo29_read_temperature ( &thermo29, &temperature ) ) )
{
log_printf ( &logger, " Temperature: %.2f degCrnn", temperature );
}
}
The full application code, and ready to use projects can be installed directly from NECTO Studio The package Manager (recommended), downloaded from our LibStock™ or found on MikroE Github account.
Other MikroE Libraries used in the example:
- MikroSDK.Board
- MikroSDK.Log
- Click.Thermo29
Additional Notes and Information
Depending on the development board you are using, you may need USB UART Click Board™, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroE compilers.
MIKROSDK
Thie Thermo 29 Click Board™ is supported with mikroSDK - MikroE Software Development Kit, which needs to be downloaded from the LibStock and installed for the compiler you are using to ensure proper operation of mikroSDK compliant Click board™ demo applications.
Thermo 29 Click Board
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.