Mikroelektronika d.o.o.
Luftgeschwindigkeits-Click-Board
Luftgeschwindigkeits-Click-Board
Verfügbarkeit für Abholungen konnte nicht geladen werden
Key Features:
- MEMS-Sensor auf Thermosäulenbasis, thermische Isolationstechnologie, resistent gegen Oberflächenverschmutzung, Anwendung mit geringem Stromverbrauch, I2C-Schnittstelle und mehr
- Basierend auf dem FS3000-1005 - Luftgeschwindigkeitsmodul von Renesas
- Kann für Luftaufbereitungssysteme, HVAC, analytische Gasüberwachungssysteme, Rechenzentren und Luftqualitätssysteme verwendet werden, um Fehler am Lüfter oder Gebläse, die Lüfterdrehzahlregelung oder Filterverstopfungen zu erkennen
- mikroBUS: I2C-Schnittstelle
Das Air Velocity Click Board™ ist eine kompakte Zusatzplatine, die die direkte Luftgeschwindigkeit misst. Diese Platine verfügt über das FS3000-1005, ein oberflächenmontiertes Luftgeschwindigkeitsmodul mit einem MEMS-Thermosäulensensor von Renesas. Dieses I2C-konfigurierbare Luftgeschwindigkeitsmodul verfügt über einen digitalen Ausgang mit einer 12-Bit-Auflösung und einem großen Betriebsbereich von 0–7,2 Metern/Sekunde (0–16,2 mph). Der Sensor besteht aus einer „festen“ Wärmeisolationstechnologie und einer Siliziumkarbidbeschichtung zum Schutz vor Abrieb und Wasserkondensation. Dieses Click Board™ eignet sich für Luftaufbereitungssysteme, HVAC, analytische Gasüberwachungssysteme, Rechenzentren und Luftqualitätssysteme zur Erkennung von Fehlern im Lüfter oder Gebläse, der Lüfterdrehzahlregelung oder Filterverstopfungen.
Das Air Velocity Click Board™ wird von einer mikroSDK-kompatiblen Bibliothek unterstützt, die Funktionen enthält, die die Softwareentwicklung vereinfachen. Dieses Click Board™ ist ein gründlich getestetes Produkt und kann auf einem System verwendet werden, das mit der mikroBUS™-Buchse ausgestattet ist.
How Does The Air Velocity Click Board™ Work?
The Air Velocity Click Board™ is based on the FS3000-1005, a high-performance surface-mount type air velocity module utilizing a MEMS thermopile-based sensor from Renesas. The FS3000-1005 measures the direct local air, which allows the system control to make adjustments quickly. It features a digital output with a 12-bit resolution with a wide operational range of 0-7.2meter/second (0-16.2mph). By providing a closed-loop control, systems can reduce the energy cost of the system. The FS3000-1005 targets low-profile applications and is designed to measure airflow around critical components such as analytic gas monitoring systems, data centers, and air quality systems to detect failures in the fan or blower, fan speed control, or filter clogging.
The FS3000-1005 comprises a "solid" thermal isolation technology and silicon-carbide coating to protect it from abrasive wear and water condensation. This Click board™ communicates with MCU using the standard I2C 2-Wire interface to read data and configure settings, supporting a Fast Mode operation up to 400kHz. It continuously measures in operation, where the data is sent in byte packages.
The Air Velocity Click Board™ can be operated only with a 3.3V logic voltage level. The board must perform appropriate logic voltage level conversion before using MCUs with different logic levels. However, the Click board™ comes equipped with a library containing functions and an example code that can be used as a reference for further development.
SPECIFICATIONS
| Type | Environmental |
| Applications | Can be used for air handling systems, HVAC, analytic gas monitoring systems, data centers, and air quality systems to detect failures in the fan or blower, fan speed control, or filter clogging |
| On-board modules | FS3000-1005 - air velocity module from Renesas |
| Key Features | MEMS thermopile-based sensor, thermal isolation technology, resistant to surface contamination, low power application, I2C interface, and more |
| Interface | I2C |
| Compatibility | mikroBUS |
| Click board size | S (28.6 x 25.4 mm) |
| Input Voltage | 3.3V |
PINOUT DIAGRAM
This table shows how the pinout of the Air Velocity Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
| Notes | Pin |  |
Pin | Notes | |||
|---|---|---|---|---|---|---|---|
| NC | 1 | AN | PWM | 16 | NC | ||
| NC | 2 | RST | INT | 15 | NC | ||
| NC | 3 | CS | RX | 14 | NC | ||
| NC | 4 | SCK | TX | 13 | NC | ||
| NC | 5 | MISO | SCL | 12 | SCL | I2C Clock | |
| NC | 6 | MOSI | SDA | 11 | SDA | I2C Data | |
| Power Supply | 3.3V | 7 | 3.3V | 5V | 10 | NC | |
| Ground | GND | 8 | GND | GND | 9 | GND | Ground |
ONBOARD SETTINGS AND INDICATORS
| Label | Name | Default | Description |
|---|---|---|---|
| LD1 | PWR | - | Power LED Indicator |
AIR VELOCITY CLICK ELECTRICAL SPECIFICATIONS
| Description | Min | Typ | Max | Unit |
|---|---|---|---|---|
| Supply Voltage | - | 3.3 | - | V |
| Air Velocity | 0 | - | 7.23 | m/s |
| Resolution | - | - | 12 | bit |
Software Support
We provide a library for the Air Velocity Click Board™ as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
The package can be downloaded/installed directly from NECTO Studio The package Manager(recommended), downloaded from our LibStock™ or found on MikroE Github account.
Library Description
This library contains API for Athe Air Velocity Click Board™ driver.
Key functions
-
airvelocity_read_outputThis function reads the raw output counts by using I2C serial interface. -
airvelocity_convert_counts_to_mpsThis function converts raw output counts to velocity in m/sec (0-7.23).
Example Description
This example demonstrates the use of the Air Velocity Click Board™ by reading and displaying the output counts and air velocity in m/sec.
void application_task ( void )
{
uint16_t out_counts;
if ( AIRVELOCITY_OK == airvelocity_read_output ( &airvelocity, &out_counts ) )
{
log_printf ( &logger, " Out counts: %urn", out_counts );
log_printf ( &logger, " Air velocity: %.2f m/srnn", airvelocity_convert_counts_to_mps ( out_counts ) );
Delay_ms ( 250 );
}
}
The full application code, and ready to use projects can be installed directly from NECTO Studio The package Manager(recommended), downloaded from our LibStock™ or found on MikroE Github account.
Other MikroE Libraries used in the example:
- MikroSDK.Board
- MikroSDK.Log
- Click.AirVelocity
Additional Notes and Information
Depending on the development board you are using, you may need USB UART Click Board™, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.
MIKROSDK
The Air Velocity Click Board™ is supported with mikroSDK - MikroElektronika Software Development Kit. To ensure proper operation of mikroSDK compliant Click board™ demo applications, mikroSDK should be downloaded from the LibStock and installed for the compiler you are using.
Luftgeschwindigkeits-Click-Board
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.