Mikroelektronika d.o.o.
Aktuelles 9 Click Board
Aktuelles 9 Click Board
Verfügbarkeit für Abholungen konnte nicht geladen werden
Key Features:
- Geringer Stromverbrauch, integrierte Stromführung, geringe Gesamtfehlerrate, hohe Bandbreite, schnelle Reaktionszeit, hohe Genauigkeit und Präzision, Möglichkeit der Signalverarbeitung in analoger und digitaler Form, und mehr
- Basierend auf dem CT415-HSN830DR – XtremeSense® TMR-Stromsensor von Crocus Technology
- Kann für viele Verbraucher-, Unternehmens- und Industrieanwendungen verwendet werden
- mikroBUS: I2C und analoge Schnittstellen
Das Current 9 Click Board™ ist eine kompakte Zusatzplatine, die eine präzise und genaue Stromerfassungslösung bietet. Diese Platine verfügt über den CT415-HSN830DR, einen hochbandbreiten und extrem rauscharmen XtremeSense® TMR-Stromsensor für den Strombereich bis zu 30 A von Crocus Technology. Dieser Sensor verfügt außerdem über einen integrierten stromführenden Leiter, der den Nennstrom verarbeitet und eine Strommessung als lineare analoge Ausgangsspannung erzeugt, wodurch ein Gesamtausgangsfehler von ca. ±1 % des Skalenendwerts erreicht wird. Danach kann der Benutzer die Ausgangsspannung in analoger oder digitaler Form verarbeiten. Dieses Click Board™ ist ideal für hochpräzise Strommessungen für viele Verbraucher-, Unternehmens- und Industrieanwendungen.
Das Current 9 Click Board™ wird von einer mikroSDK-kompatiblen Bibliothek unterstützt, die Funktionen enthält, die die Softwareentwicklung vereinfachen. Dieses Click Board™ ist ein gründlich getestetes Produkt und kann auf einem System verwendet werden, das mit der mikroBUS™-Buchse ausgestattet ist.
DO NOT TOUCH THE BOARD WHILE THE LOAD IS CONNECTED!
Note: This Click board™ needs to be used by trained personnel only while applying high voltages. Special care should be taken when working with hazardous voltage levels.
How Does The Current 9 Click Board™ Work?
The Current 9 Click Board™ is based on the CT415-HSN830DR, an XtremeSense® TMR current sensor providing high-accuracy current measurements from Crocus Technology. The CT415-HSN830DR comes with an integrated current carrying conductor (CCC) that handles current from 0A up to 30A. It has high sensitivity and a wide dynamic range with excellent accuracy (low total output error) across temperature range from –40°C to +85°C making it suitable for many consumer, enterprise, and industrial applications.
When current flows through the CCC, the XtremeSense® TMR sensors inside the chip sense the field, generating a differential voltage signal that goes through the analogue front-end to output a current measurement with less than ±1% full-scale total output error. The CT415-HSN830DR is designed to enable a fast response time for the current measurement. In addition, the user is provided with the option of selecting the output voltage level of the sensor performed by the onboard SMD jumper by populating it to an appropriate position marked as 3V3 or 5V. Even with high bandwidth of 1MHz, the CT415 consumes minimal power.
The output signal of the CT415-HSN830DR can be converted to a digital value using MCP3221, a successive approximation A/D converter with a 12-bit resolution from Microchip using a 2-wire I2C compatible interface, or can be sent directly to an analogue pin of the mikroBUS™ socket labelled as AN. Selection can be performed by onboard SMD jumper labelled as ADC SEL, placing it to an appropriate position marked as EXT and INT.
Also, the Current 9 Click Board™ should be connected in series with the load. The current is measured by two onboard terminal connectors, one terminal block for the positive and the other for the negative current input.
The Current 9 Click Board™ can operate with both 3.3V and 5V logic voltage levels selected via the VCC SEL jumper. This way, it is allowed for both 3.3V and 5V capable MCUs to use the communication lines properly. However, the Click board™ comes equipped with a library containing easy-to-use functions and an example code that can be used, as a reference, for further development.
SPECIFICATIONS
| Type | Measurements |
| Applications | Can be used for many consumer, enterprise, and industrial applications |
| On-board modules | CT415-HSN830DR - XtremeSense® TMR current sensor from Crocus Technology |
| Key Features | Low power consumption, integrated current carrying conductor, low total error output, high bandwidth, fast response time, high accuracy and precision, the possibility of signal processing in analogue and digital form, and more |
| Interface | Analog, I2C |
| Compatibility | mikroBUS |
| Click board size | L (57.15 x 25.4 mm) |
| Input Voltage | 3.3V or 5V |
PINOUT DIAGRAM
This table shows how the pinout of the Current 9 Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
| Notes | Pin |  |
Pin | Notes | |||
|---|---|---|---|---|---|---|---|
| Analog Signal | AN | 1 | AN | PWM | 16 | NC | |
| NC | 2 | RST | INT | 15 | NC | ||
| NC | 3 | CS | RX | 14 | NC | ||
| NC | 4 | SCK | TX | 13 | NC | ||
| NC | 5 | MISO | SCL | 12 | SCL | I2C Clock | |
| NC | 6 | MOSI | SDA | 11 | SDA | I2C Data | |
| Power Supply | 3.3V | 7 | 3.3V | 5V | 10 | 5V | Power Supply |
| Ground | GND | 8 | GND | GND | 9 | GND | Ground |
ONBOARD SETTINGS AND INDICATORS
| Label | Name | Default | Description |
|---|---|---|---|
| LD1 | PWR | - | Power LED Indicator |
| JP2 | OUT SEL | Left | CT415 Output Voltage Level Selection 3V3/5V: Left position 3V3, Right position 5V |
| JP2 | VCC SEL | Right | Logic Level Voltage Selection 3V3/5V: Left position 3V3, Right position 5V |
| JP3 | ADC SEL | Right | Output Voltage A/D Selection EXT/INT: Left position EXT, Right position INT |
CURRENT 9 CLICK ELECTRICAL SPECIFICATIONS
| Description | Min | Typ | Max | Unit |
|---|---|---|---|---|
| Supply Voltage | 3.3 | - | 5 | V |
| Current Measurement Range | 0 | - | 30 | A |
| Operating Temperature Range | -40 | +25 | +85 | °C |
Software Support
We provide a library for the Current 9 Click Board™ as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
The package can be downloaded/installed directly from NECTO Studio The package Manager (recommended), downloaded from our LibStock™ or found on the MikroE Github account.
Library Description
This library contains API for the Current 9 Click Board™ driver.
Key functions
-
current9_read_voltageThis function reads raw ADC value and converts it to a proportional voltage level. -
current9_read_currentThis function reads the input current level [A] based on @b CURRENT9_NUM_CONVERSIONS of voltage measurements. -
current9_set_vrefThis function sets the voltage reference for the Current 9 Click Board™ driver.
Example Description
This example demonstrates the Current 9 Click Board™ by reading and displaying the input current measurements.
void application_task ( void )
{
float current = 0;
if ( CURRENT9_OK == current9_read_current ( ¤t9, ¤t ) )
{
log_printf( &logger, " Current : %.3f[A]rnn", current );
Delay_ms( 1000 );
}
}
The complete application code and ready-to-use projects can be installed directly from NECTO Studio. The package Manager (recommended), is downloaded from our LibStock™ or found on the MikroE Github account.
Other MikroE Libraries used in the example:
- MikroSDK.Board
- MikroSDK.Log
- Click.Current9
Additional Notes and Information
Depending on the development board you are using, you may need USB UART Click Board™, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.
MIKROSDK
The Current 9 Click Board™ is supported with mikroSDK - MikroElektronika Software Development Kit. To ensure proper operation of mikroSDK compliant Click board™ demo applications, mikroSDK should be downloaded from the LibStock and installed for the compiler you are using.
Aktuelles 9 Click Board
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.