Mikroelektronika d.o.o.
LightRanger 10 Click-Platine
LightRanger 10 Click-Platine
Verfügbarkeit für Abholungen konnte nicht geladen werden
Key Features:
- Schnelle und genaue Entfernungsmessung, erhebliche Verbesserung der Leistung bei der Entfernungsmessung über große Entfernungen hinweg für alle Ziele und Lichtverhältnisse, Fähigkeit zur Erkennung mehrerer Objekte, Ziele in einer Entfernung von über 80 cm sind immun gegen Übersprechen von Deckglas und mehr
- Basierend auf dem VL53L4CX - optischer ToF-Abstandssensor (Time-of-Flight) von STMicroelectronics
- Kann zur Anwesenheitserkennung (Objekterkennung), Entfernungsmessung, industriellen Entfernungsmessung, Bestandskontrolle und mehr verwendet werden
- mikroBUS: I2C-Schnittstelle
Das LightRanger 10 Click Board™ ist eine kompakte Zusatzplatine, die für Anwendungen zur Entfernungsmessung und Distanzerfassung geeignet ist. Diese Platine verfügt über den VL53L4CX, einen optischen ToF-Entfernungssensor (Time of Flight) mit einem erweiterten Zielerkennungsbereich von STMicroelectronics. Der VL53L4CX wurde speziell für Messungen über große Entfernungen und mehrere Ziele entwickelt und bietet genaue Entfernungsmessungen bis zu 6 m mit ausgezeichneten Ergebnissen über kurze Entfernungen und 18° FoV (Sichtfeld) und verbessert so die Leistung bei Umgebungslicht. Die Datenverarbeitung erfolgt im VL53L4CX und liefert Entfernungsinformationen und Konfidenzwerte über seine I2C-Schnittstelle. Dieses Click Board™ ist für Anwesenheitserkennung (Objekterkennung), Entfernungsmessung, industrielle Entfernungsmessung, Bestandskontrolle und viele andere Anwendungen geeignet.
Das LightRanger 10 Click Board™ wird von einer mikroSDK-kompatiblen Bibliothek unterstützt, die Funktionen enthält, die die Softwareentwicklung vereinfachen. Dieses Click Board™ ist ein gründlich getestetes Produkt und kann auf einem System verwendet werden, das mit der mikroBUS™-Buchse ausgestattet ist.
How Does The LightRanger 10 Click Board™ Work?
The LightRanger 10 Click Board™ is based on the VL53L4CX, a ToF (Time-of-Flight) optical distance sensor with an extended target detection range from STMicroelectronics. This ToF sensor integrates a VCSEL (vertical-cavity surface-emitting laser), which emits an entirely invisible 940nm IR light, totally safe for eyes (Class 1 certification), and a SPAD (single-photon avalanche diode) array which helps the VL53L4CX to achieve the best ranging performance even when a Click board™ is hidden behind a wide range of cover glass materials.
Specifically designed for long-range and multi-target measurements, the VL53L4CX provides very accurate distance measurements up to 6m with excellent results over short distances and 18° FoV (Field of View), which improves performances under ambient light. Thanks to ST's patented algorithms, the VL53L4CX can detect multiple objects within the FoV with depth understanding. ST histogram algorithms ensure cover glass crosstalk immunity beyond 80cm and dynamic smudge compensation for targets below 80cm. Like all Time-of-Flight sensors based on ST's FlightSense technology, the VL53L4CX records an absolute distance measurement regardless of the target color and reflectance.
The LightRanger 10 Click Board™ communicates with MCU using the standard I2C 2-Wire interface to read data and configure settings with a maximum clock frequency of 1MHz. This Click board™ can be enabled or disabled through the EN pin routed to the CS pin of the mikroBUS™ socket; hence, offering a switch operation to turn ON the initial boot sequence of the VL53L4CX. It also possesses an additional interrupt pin, routed to the INT pin on the mikroBUS™ socket, indicating when a ranging measurement is available.
The LightRanger 10 Click Board™ can be operated only with a 3.3V logic voltage level. The board must perform appropriate logic voltage level conversion before using MCUs with different logic levels. However, the Click board™ comes equipped with a library containing functions and an example code that can be used, as a reference, for further development.
SPECIFICATIONS
| Type | Optical |
| Applications | Can be used for presence (object) detection, distance measurement, industrial ranging, inventory control, and more |
| On-board modules | VL53L4CX - ToF (Time-of-Flight) optical distance sensor from STMicroelectronics |
| Key Features | Fast and accurate distance ranging, major improvement in long distance-ranging performance across all targets and light levels, multiobject detection capability, targets beyond 80 cm range are immune to crosstalk from cover glass, and more |
| Interface | I2C |
| Compatibility | mikroBUS |
| Click board size | S (28.6 x 25.4 mm) |
| Input Voltage | 3.3V |
PINOUT DIAGRAM
This table shows how the pinout of the LightRanger 10 Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
| Notes | Pin |  |
Pin | Notes | |||
|---|---|---|---|---|---|---|---|
| NC | 1 | AN | PWM | 16 | NC | ||
| NC | 2 | RST | INT | 15 | INT | Interrupt | |
| Enable | EN | 3 | CS | RX | 14 | NC | |
| NC | 4 | SCK | TX | 13 | NC | ||
| NC | 5 | MISO | SCL | 12 | SCL | I2C Clock | |
| NC | 6 | MOSI | SDA | 11 | SDA | I2C Data | |
| Power Supply | 3.3V | 7 | 3.3V | 5V | 10 | NC | |
| Ground | GND | 8 | GND | GND | 9 | GND | Ground |
ONBOARD SETTINGS AND INDICATORS
| Label | Name | Default | Description |
|---|---|---|---|
| LD1 | PWR | - | Power LED Indicator |
LIGHTRANGER 10 CLICK ELECTRICAL SPECIFICATIONS
| Description | Min | Typ | Max | Unit |
|---|---|---|---|---|
| Supply Voltage | - | 3.3 | - | V |
| Distance Measurement Range | 0 | - | 6 | m |
| Field of View | - | 18 | - | Deg |
| VCSEL Wavelength | - | 940 | - | nm |
| Operating Temperature Range | -30 | +25 | +85 | °C |
Software Support
We provide a library for the LightRanger 10 Click Board™ as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
The package can be downloaded/installed directly from NECTO Studio The package Manager (recommended), downloaded from our LibStock™ or found on the MikroE Github account.
Library Description
This library contains an API for LightRanger 10 Click driver.
Key functions
-
lightranger10_get_int_pinThis function returns the INT pin logic state. -
lightranger10_clear_interruptsThis function clears the interrupts. -
lightranger10_get_distanceThis function reads the target object distance in millimetres.
Example Description
This example demonstrates the use of the LightRanger 10 Click Board™ by reading and displaying the target object distance in millimetres.
void application_task ( void )
{
while ( lightranger10_get_int_pin ( &lightranger10 ) );
uint16_t distance_mm;
if ( ( LIGHTRANGER10_OK == lightranger10_clear_interrupts ( &lightranger10 ) ) &&
( LIGHTRANGER10_OK == lightranger10_get_distance ( &lightranger10, &distance_mm ) ) )
{
log_printf ( &logger, " Distance: %u mm rnn", distance_mm );
}
}
The full application code and ready-to-use projects can be installed directly from NECTO Studio The package Manager (recommended), downloaded from our LibStock™ or found on the MikroE Github account.
Other MikroE Libraries used in the example:
- MikroSDK.Board
- MikroSDK.Log
- Click.LightRanger10
Additional Notes and Information
Depending on the development board you are using, you may need USB UART Click Board™, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.
MIKROSDK
The LightRanger 10 Click Board™ is supported with mikroSDK - MikroElektronika Software Development Kit. To ensure proper operation of mikroSDK compliant Click board™ demo applications, mikroSDK should be downloaded from the LibStock and installed for the compiler you are using.
LightRanger 10 Click-Platine
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.