Mikroelektronika d.o.o.
LED-Treiber 13 Click-Platine
LED-Treiber 13 Click-Platine
Verfügbarkeit für Abholungen konnte nicht geladen werden
Key Features
- Entwickelt für eine Schaltfrequenz von 400 kHz, Betrieb im Boost- oder SEPIC-Modus für flexible Ausgabe, bietet 150 mA pro Kanal, programmierbare Boost-Frequenz, wählbare LED-Dimmfunktion, integrierte Schutzschaltung und mehr
- Basierend auf dem A80604-1 - Multi-Output-LED-Treiber für Automobilanwendungen von Allegro Microsystems
- Kann für verschiedene Automobilanwendungen verwendet werden, wie z. B. Infotainment-Hintergrundbeleuchtung, Innen-/Außenbeleuchtung, Head-up-Display und mehr
- mikroBUS: PWM- und GPIO-Schnittstellen
Overview
Das LED Driver 13 Click Board™ ist eine kompakte Zusatzplatine, die die Steuerung mehrerer LEDs vereinfacht. Diese Platine verfügt über den A80604-1, einen 4-Kanal-LED-Treiber mit einer Schaltfrequenz von 400 kHz, der 150 mA pro Kanal von Allegro Microsystems liefert. Er wird von einem externen Netzteil im Bereich von 6 V bis 18 V gespeist und liefert eine Ausgangsspannung von ungefähr 26 V, die zur Stromversorgung der an die LED-Kanäle angeschlossenen LEDs verwendet wird. Auf der logischen Seite verwendet diese Platine sowohl 3 V als auch 5 V mit mikroBUS™-Stromschienen und kommuniziert über GPIO-Pins mit der MCU. Darüber hinaus hat der Benutzer die Möglichkeit, die LED-Dimmung analog oder digital auszuwählen, indem er einen PWM-Pin von der mikroBUS™-Buchse oder ein integriertes Potentiometer/externes PWM-Signal verwendet. Dieses Click Board™ eignet sich für verschiedene Automobilanwendungen, wie etwa Infotainment-Hintergrundbeleuchtung, Innen-/Außenbeleuchtung, Head-up-Display und mehr.
Das LED Driver 13 Click Board™ wird von einer mikroSDK-kompatiblen Bibliothek unterstützt, die Funktionen enthält, die die Softwareentwicklung vereinfachen. Dieses Click Board™ wird als vollständig getestetes Produkt geliefert und ist bereit für den Einsatz auf einem System, das mit der mikroBUS™-Buchse ausgestattet ist.
How Does The Work?
The LED Driver 13 Click Board™ as its foundation uses the A80604-1, a multi-output LED driver for automotive applications designed at a switching frequency of 400kHz from Allegro Microsystems. The A80604-1 implements a current-mode boost/SEPIC converter with gate driver for onboard external N-channel MOSFET. Thus, it provides an output current of 150mA per channel at an output voltage of approximately 26V, limited by the input voltage of the A80604-1, which must be in the range of 6V to 18V for proper operation. It also has integrated protection circuitry to guard against output short, overvoltage, LED short-circuit protections, and overtemperature.
The LED Driver 13 Click Board™ offers two ways to implement the LED dimming: analog dimming via an onboard potentiometer or through an external PWM signal applied on the onboard header labelled as PWM, and PWM dimming using a PWM pin from the mikroBUS™ socket. Using the patented Pre-Emptive Boost control, an LED brightness contrast ratio of 15,000:1 can be achieved using PWM dimming at 200Hz. A higher ratio of 150,000:1 is possible when using a combination of PWM and analog dimming. The analog dimming selection can be made by positioning the SMD jumper labelled as ADIM SEL to an appropriate position marked as POT or PWM.
The switching frequency of the A80604-1 can be externally synchronized to an external clock or generated internally - programmed between 260kHz and 2.3MHz. The spread-spectrum technique (with user-programmable dithering range and modulation frequency) is provided to reduce EMI. A clock-out signal, available on the onboard header labelled CLKO, allows other converters to be synchronized to the switching frequency of A80604-1.
As mentioned in the product description, the LED Driver 13 Click Board™ communicates with MCU using several GPIO pins. The Enable pin, labelled as EN and routed to the CS pin of the mikroBUS™ socket, optimizes power consumption used for power ON/OFF purposes of the board. In addition, it also uses a fault pin labelled as FLT and routed to the INT pin of the mikroBUS™ socket, which indicates the previously mentioned fault conditions to an external system if any fault occurs during operation. This fault signal is also visually indicated via a red LED labelled FAULT. Once the fault is removed, the soft-start process will continue.
The LED Driver 13 Click Board™ can operate with both 3.3V and 5V logic voltage levels selected via the VCC SEL jumper. This way, it is allowed for both 3.3V and 5V capable MCUs to use the communication lines properly. However, the Click board™ comes equipped with a library containing easy-to-use functions and an example code that can be used, as a reference, for further development.
SPECIFICATIONS
| Type | LED Drivers |
| Applications | The LED Driver 13 Click Board™ be used for various automotive applications, such as infotainment backlighting, interior/exterior lighting, heads-up display, and more |
| On-board modules | A80604-1 - multi-output LED driver for automotive applications from Allegro Microsystems |
| Key Features | Designed at a switching frequency of 400kHz, operate in Boost or SEPIC mode for flexible output , provides 150mA per channel, programmable boost frequency, selectable LED Dimming feature, onboard protection circuitry, and more |
| Interface | GPIO,PWM |
| Compatibility | mikroBUS |
| Click board size | L (57.15 x 25.4 mm) |
| Input Voltage | 3.3V or 5V,External |
PINOUT DIAGRAM
This table shows how the pinout for the LED Driver 13 Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
| Notes | Pin |  |
Pin | Notes | |||
|---|---|---|---|---|---|---|---|
| NC | 1 | AN | PWM | 16 | PWM | PWM Signal | |
| NC | 2 | RST | INT | 15 | FLT | Fault Indicator | |
| Enable | EN | 3 | CS | RX | 14 | NC | |
| NC | 4 | SCK | TX | 13 | NC | ||
| NC | 5 | MISO | SCL | 12 | NC | ||
| NC | 6 | MOSI | SDA | 11 | NC | ||
| Power Supply | 3.3V | 7 | 3.3V | 5V | 10 | 5V | Power Supply |
| Ground | GND | 8 | GND | GND | 9 | GND | Ground |
ONBOARD SETTINGS AND INDICATORS
| Label | Name | Default | Description |
|---|---|---|---|
| LD1 | PWR | - | Power LED Indicator |
| LD2 | FAULT | - | Fault LED Indicator |
| JP1 | VCC SEL | Left | Logic Level Voltage Selection 3V3/5V: Left position 3V3, Right position 5V |
| JP2 | ADIM SEL | Left | Analog Dimming Mode Selection POT/PWM: Left position POT, Right position PWM |
| J1 | PWR | Unpopulated | Analog Dimming External PWM Signal Header |
| J2 | CLKO | Unpopulated | Sync Clock-Out Signal Header |
| J3 | LED DRIVER | Populated | LED Driver Header |
LED DRIVER 13 CLICK ELECTRICAL SPECIFICATIONS
| Description | Min | Typ | Max | Unit |
|---|---|---|---|---|
| Supply Voltage VCC | 3.3 | - | 5 | V |
| External Supply Voltage VIN | 6 | - | 18 | V |
| Output LED Supply Voltage VOUT | - | 26 | - | V |
| LED Channel Current | - | 150 | - | mA |
| Operating Temperature Range | -40 | +25 | +120 | °C |
Software Support
We provide a library for the LED Driver 13 Click Board™ as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
The package can be downloaded/installed directly from NECTO Studio The package Manager (recommended), downloaded from our LibStock™ or found on MikroE Github account.
Library Description
This library contains API for LED Driver 13 Click driver.
Key functions
-
leddriver13_set_enableLED Driver 13 set enable function. -
leddriver13_pwm_startLED Driver 13 start PWM module. -
leddriver13_set_duty_cycleLED Driver 13 sets PWM duty cycle.
Example Description
This library contains API for the LED Driver 13 Click Board™ driver.
void application_task ( void )
{
static int8_t duty_cnt = 1;
static int8_t duty_inc = 1;
float duty = duty_cnt / 1000.0;
leddriver13_set_duty_cycle ( &leddriver13, duty );
log_printf( &logger, "> Duty: %.1f%%rn", duty * 100 );
Delay_ms( 100 );
if ( 30 == duty_cnt )
{
duty_inc = -1;
}
else if ( 0 == duty_cnt )
{
duty_inc = 1;
}
duty_cnt += duty_inc;
}
The full application code, and ready to use projects can be installed directly from NECTO Studio The package Manager (recommended), downloaded from our LibStock™ or found on MikroE Github account.
Other MikroE Libraries used in the example:
- MikroSDK.Board
- MikroSDK.Log
- Click.LEDDriver13
Additional Notes and Information
Depending on the development board you are using, you may need a USB UART Click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.
MIKROSDK
The LED Driver 13 Click Board™ is supported with mikroSDK - MikroElektronika Software Development Kit. To ensure proper operation of mikroSDK compliant Click board™ demo applications, mikroSDK should be downloaded from the LibStock and installed for the compiler you are using.
Software Support
We provide a library for the LED Driver 13 Click Board™ as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
The package can be downloaded/installed directly from NECTO Studio The package Manager (recommended), downloaded from our LibStock™ or found on MikroE Github account.
Library Description
This library contains API for LED Driver 13 Click driver.
Key functions
-
leddriver13_set_enableLED Driver 13 set enable function. -
leddriver13_pwm_startLED Driver 13 start PWM module. -
leddriver13_set_duty_cycleLED Driver 13 sets PWM duty cycle.
Example Description
This library contains API for the LED Driver 13 Click Board™ driver.
void application_task ( void )
{
static int8_t duty_cnt = 1;
static int8_t duty_inc = 1;
float duty = duty_cnt / 1000.0;
leddriver13_set_duty_cycle ( &leddriver13, duty );
log_printf( &logger, "> Duty: %.1f%%rn", duty * 100 );
Delay_ms( 100 );
if ( 30 == duty_cnt )
{
duty_inc = -1;
}
else if ( 0 == duty_cnt )
{
duty_inc = 1;
}
duty_cnt += duty_inc;
}
The full application code, and ready to use projects can be installed directly from NECTO Studio The package Manager (recommended), downloaded from our LibStock™ or found on MikroE Github account.
Other MikroE Libraries used in the example:
- MikroSDK.Board
- MikroSDK.Log
- Click.LEDDriver13
Additional Notes and Information
Depending on the development board you are using, you may need a USB UART Click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.
MIKROSDK
The LED Driver 13 Click Board™ is supported with mikroSDK - MikroElektronika Software Development Kit. To ensure proper operation of mikroSDK compliant Click board™ demo applications, mikroSDK should be downloaded from the LibStock and installed for the compiler you are using.
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.