Mikroelektronika d.o.o.
I2C-Isolator 4 Click-Platine
I2C-Isolator 4 Click-Platine
Verfügbarkeit für Abholungen konnte nicht geladen werden
Key Features:
- Robuste galvanische Trennung digitaler Signale, widersteht 5 kVRMS für 60 s, geringer Stromverbrauch, unterstützt I2C-Takt-Stretching, störungsfreien Betrieb, hervorragende Zuverlässigkeit, lange Lebensdauer und mehr
- Basierend auf dem MAX14937 – zweikanaliger I2C-Digitalisolator von Analog Devices
- Kann zur Übertragung digitaler Signale zwischen Schaltkreisen mit unterschiedlichen Leistungsbereichen verwendet werden
- mikroBUS: I2C-Schnittstelle
Das I2C Isolator 4 Click Board™ ist eine kompakte Zusatzplatine, die vollständig isolierte bidirektionale Kommunikation bietet. Diese Platine verfügt über den MAX14937, einen zweikanaligen 5kVRMS I2C-Digitalisolator von Analog Devices. Der MAX14937 bietet zwei bidirektionale Open-Drain-Kanäle für Anwendungen, bei denen Daten in beide Richtungen auf derselben Leitung übertragen werden müssen. Es unterstützt Datenraten von DC bis zu 1,7 MHz und kann in isolierten I2C-Bussen mit oder ohne Taktdehnung verwendet werden. Dieses Click Board™ eignet sich für die Übertragung digitaler Signale zwischen Schaltkreisen mit unterschiedlichen Leistungsbereichen bei Umgebungstemperaturen.
Das I2C Isolator 4 Click Board™ wird von einer mikroSDK-kompatiblen Bibliothek unterstützt, die Funktionen enthält, die die Softwareentwicklung vereinfachen. Dieses Click Board™ wird als vollständig getestetes Produkt geliefert und ist bereit für den Einsatz auf einem System, das mit der mikroBUS™-Buchse ausgestattet ist.
How Does The I2C Isolator 4 Click Board™ Work?
The I2C Isolator 4 Click Board™ is based on the MAX14937, a two-channel, 5kVRMS I2C digital isolator from Analog Devices. The MAX14937 bidirectionally buffers the two I2C signals across the isolation barrier and supports I2C clock stretching while providing 5kVrms of galvanic isolation. It transfers digital signals between circuits with different power domains at ambient temperatures and offers the glitch-free operation, excellent reliability, and a very long operational life. The wide temperature range and high isolation voltage make the device ideal for harsh industrial environments.
The I2C Isolator 4 Click Board™ also possesses two terminals labelled as VIN and SDA/SCL at the bottom of the Click board™, where VIN represents the B-side power supply of the isolator. At the same time, the other corresponds to the isolated bidirectional logic-bus terminal.
This Click board™ can operate with both 3.3V and 5V logic voltage levels selected via the VCC SEL jumper. This way, it is allowed for both 3.3V and 5V capable MCUs to use the communication lines properly. However, the Click board™ comes equipped with a library containing easy-to-use functions and an example code that can be used, as a reference, for further development.
SPECIFICATIONS
| Type | I2C,Isolators |
| Applications | Can be used for transferring digital signals between circuits with different power domains |
| On-board modules | MAX14937 - two-channel I2C digital isolator from Analog Devices |
| Key Features | Robust galvanic isolation of digital signals, withstands 5kVRMS for 60s, low power consumption, supports I2C clock stretching, glitch-free operation, excellent reliability, long operational life, and more |
| Interface | I2C |
| Compatibility | mikroBUS |
| Click board size | M (42.9 x 25.4 mm) |
| Input Voltage | 3.3V or 5V |
PINOUT DIAGRAM
This table shows how the pinout of the I2C Isolator 4 Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
| Notes | Pin |  |
Pin | Notes | |||
|---|---|---|---|---|---|---|---|
| NC | 1 | AN | PWM | 16 | NC | ||
| NC | 2 | RST | INT | 15 | NC | ||
| NC | 3 | CS | RX | 14 | NC | ||
| NC | 4 | SCK | TX | 13 | NC | ||
| NC | 5 | MISO | SCL | 12 | SCL | I2C Clock | |
| NC | 6 | MOSI | SDA | 11 | SDA | I2C Data | |
| Power Supply | 3.3V | 7 | 3.3V | 5V | 10 | 5V | Power Supply |
| Ground | GND | 8 | GND | GND | 9 | GND | Ground |
ONBOARD SETTINGS AND INDICATORS
| Label | Name | Default | Description |
|---|---|---|---|
| LD1 | PWR | - | Power LED Indicator |
| JP1 | VCC SEL | Left | Logic Level Voltage Selection 3V3/5V: Left position 3V3, Right position 5V |
I2C ISOLATOR 4 CLICK ELECTRICAL SPECIFICATIONS
| Description | Min | Typ | Max | Unit |
|---|---|---|---|---|
| Supply Voltage | 3.3 | - | 5 | V |
| Maximum Withstand Isolation Voltage | - | - | 5000 | Vrms |
| Maximum Frequency | - | - | 1.7 | MHz |
| Data Rate | - | - | 1.6 | Mbps |
Software Support
Software Support
We provide a library for the II2C Isolator 4 Click Board™ as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
The package can be downloaded/installed directly from NECTO Studio The package Manager (recommended), downloaded from our LibStock™ or found on the MikroE Github account.
Library Description
This library contains API for the I2C Isolator 4 Click Board™ driver.
Key functions
-
i2cisolator4_generic_writeI2C Isolator 4 I2C writing function. -
i2cisolator4_generic_readI2C Isolator 4 I2C reading function. -
i2cisolator4_set_slave_addressI2C Isolator 4 set I2C Slave address function.
Example Description
This library contains API for the I2C Isolator 4 Click Board™ driver. This demo application shows an example of an I2C Isolator 4 Click Board™ wired to the VAV Press Click Board™ for reading differential pressure and temperature measurement.
void application_task ( void ) {
get_dif_press_and_temp( );
log_printf( &logger, " Diff. Pressure : %.4f Parn", diff_press );
log_printf( &logger, " Temperature : %.4f Crn", temperature );
log_printf( &logger, "--------------------------------rn" );
Delay_ms( 2000 );
}
The full application code, and ready to use projects can be installed directly from NECTO Studio The package Manager (recommended), downloaded from our LibStock™ or found on MikroE Github account.
Other MikroE Libraries used in the example:
- MikroSDK.Board
- MikroSDK.Log
- Click.I2cIsolator4
Additional Notes and Information
Depending on the development board you are using, you may need USB UART Click Board™, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.
MIKROSDK
The I2C Isolator 4 Click Board™ is supported with mikroSDK - MikroElektronika Software Development Kit. To ensure proper operation of mikroSDK compliant Click board™ demo applications, mikroSDK should be downloaded from the LibStock and installed for the compiler you are using.
I2C-Isolator 4 Click-Platine
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.