Mikroelektronika d.o.o.
Analoge MUX 2 Click-Platine
Analoge MUX 2 Click-Platine
Verfügbarkeit für Abholungen konnte nicht geladen werden
Key Features
- 8-zu-1-Matrixschalter, niedriger Einschaltwiderstand, „Break-Before-Make“-Schaltfunktion, seriell gesteuert und mehr.
- Basierend auf dem ADG728 - Niederspannungs-CMOS-8-Kanal-Analogmatrixschalter mit seriell gesteuerter 2-Draht-Schnittstelle von Analog Devices
- Kann für eine breite Palette von Anwendungen verwendet werden, von Industrie- und Instrumentierungssystemen bis hin zu medizinischen, Verbraucher-, Kommunikations- und Automobilsystemen.
- mikroBUS: I2C und analoge Schnittstellen
Der Analog MUX 2 Click Board™ ist eine kompakte Zusatzplatine, die einen der acht Eingänge auf einen Ausgang umschaltet. Diese Platine verfügt über den ADG728, einen analogen CMOS-Matrixschalter mit niedriger Spannung und 8 Kanälen und einer seriell gesteuerten 2-adrigen Schnittstelle von Analog Devices. Der ADG728 kann gleichermaßen als Multiplexer, Demultiplexer oder Schalterarray verwendet werden und lässt sich einfach an eine neunpolige Federblockklemme anschließen. Er bietet Flexibilität und verfügt über einen niedrigen Einschaltwiderstand, der zwischen den Schaltern genau abgestimmt ist und über den gesamten Signalbereich flach ist. Dieses Click Board™ ist für verschiedene Anwendungen geeignet, von Industrie und Instrumentierung bis hin zu medizinischen, Verbraucher-, Kommunikations- und Automobilsystemen.
Das Analog MUX 2 Click Board™ wird durch eine mikroSDK-kompatible Bibliothek unterstützt, die Funktionen enthält, die die Softwareentwicklung vereinfachen. Dieses Click Board™ wird als vollständig getestetes Produkt geliefert und ist bereit für den Einsatz auf einem System, das mit der mikroBUS™-Buchse ausgestattet ist.
How Does The Analog MUX 2 Click Board™ Work?
The Analog MUX 2 Click Board™ is based on the ADG728, a low voltage, CMOS 8-channel analogue matrix switch with a serially controlled 2-wire interface from Analog Devices. The ADG728 can operate equally well as either multiplexer, demultiplexer, or switch array, providing more flexibility. It also features a low on-resistance closely matched between switches and very flat over the full signal range. During the Power-Up of the ADG728, all switching channels will be in the OFF condition, and the internal shift register will contain all zeros. All channels exhibit 'break-before-make' switching action preventing momentary shorting when switching channels.
Each bit of the 8-bit serial word corresponds to one switch of the device. Internal switching channels are independently controlled by an individual bit, providing an option of having any, all, or none of the switches activated. All of the input channels of the multiplexer can be easily connected to a 9 pole spring action block terminal, without having to use any additional tools, such as screwdrivers, while the output pin from the multiplexer is routed to the AN pin on the mikroBUS™ socket.
The Analog MUX 2 Click Board™ communicates with MCU using the standard I2C 2-Wire interface with a frequency of up to 400kHz. It also has two address pins (A0 and A1) programmed by the user to determine the value of the last two LSBs of the slave address, selected by onboard SMD jumpers labelled as ADDR SEL to an appropriate position marked as 0 and 1, allowing selection of the slave address LSBs. Also, this Click board™ has a Reset pin routed to the RST pin on the mikroBUS™ socket, which clears the input register and turns all switches to the OFF condition.
When changing the switch conditions, a new 8-bit word is written to the input shift register. The ADG728 compares the state of switches from the previous write cycle to minimize glitches on the switches output. This can be achieved if the switch is already in the ON condition and is required to stay ON.
The Analog MUX 2 Click Board™ is designed to operate with both 3.3V and 5V logic voltage levels selected via the VCC SEL jumper. It allows for both 3.3V and 5V capable MCUs to use the I2C communication lines properly. However, the Click board™ comes equipped with a library that contains functions and an example code that can be used, as a reference, for further development.
SPECIFICATIONS
| Type | Port expander |
| Applications | Can be used for a wide range of applications, from industrial and instrumentation to medical, consumer, communications, and automotive systems. |
| On-board modules | ADG728 - low voltage, CMOS 8-channel analogue matrix switch with a serially controlled 2-wire interface from Analog Devices |
| Key Features | 8-to-1 matrix switch, low on-resistance, 'Break-Before-Make' switching action, serially controlled, and more. |
| Interface | Analog, I2C |
| Compatibility | mikroBUS |
| Click board size | L (57.15 x 25.4 mm) |
| Input Voltage | 3.3V or 5V |
PINOUT DIAGRAM
This table shows how the pinout of the Analog MUX 2 Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
| Notes | Pin |  |
Pin | Notes | |||
|---|---|---|---|---|---|---|---|
| Analog Signal | AN | 1 | AN | PWM | 16 | NC | |
| Reset | RST | 2 | RST | INT | 15 | NC | |
| NC | 3 | CS | RX | 14 | NC | ||
| NC | 4 | SCK | TX | 13 | NC | ||
| NC | 5 | MISO | SCL | 12 | SCL | I2C Clock | |
| NC | 6 | MOSI | SDA | 11 | SDA | I2C Data | |
| Power Supply | 3.3V | 7 | 3.3V | 5V | 10 | 5V | Power Supply |
| Ground | GND | 8 | GND | GND | 9 | GND | Ground |
ONBOARD SETTINGS AND INDICATORS
| Label | Name | Default | Description |
|---|---|---|---|
| LD1 | PWR | - | Power LED Indicator |
| JP1 | VCC SEL | Left | Logic Level Voltage Selection 3V3/5V: Left position 3V3, Right position 5V |
| JP2 | ADDR SEL | Left | I2C Address Selection 0/1: Left position 0, Right position 1 |
ANALOG MUX 2 CLICK ELECTRICAL SPECIFICATIONS
| Description | Min | Typ | Max | Unit |
|---|---|---|---|---|
| Supply Voltage | 3.3 | - | 5 | V |
| Analog Input Signal Range | 0 | - | 5 | V |
| On-Resistance | - | 6 | 12 | Ω |
| Operating Temperature Range | -40 | +25 | +85 | °C |
Software Support
We provide a library for the Analog MUX 2 Click Board™ as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
The package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on the mikroE Github account.
Library Description
This library contains API for the Analog MUX 2 Click Board™ driver.
Key Functions
void analogmux2_cfg_setup ( analogmux2_cfg_t *cfg );- Config Object Initialization function.ANALOGMUX2_RETVAL analogmux2_init ( analogmux2_t *ctx, analogmux2_cfg_t *cfg );- Initialization function.void analogmux2_default_cfg ( analogmux2_t *ctx );- Click Default Configuration function.
Example Description
This application controls the multiplexing of a single input channel with an eight-channel matrix switch.
The demo application is composed of two sections :
void application_task ( void ) {
for ( uint8_t ch_pos = ANALOGMUX2_SET_CHANNEL_0; ch_pos <= ANALOGMUX2_SET_CHANNEL_7; ch_pos++ ) {
analogmux2_set_channel( &analogmux2, ch_pos );
Delay_ms( 3000 );
uint16_t analogmux2_an_value = 0;
log_printf( &logger, " CHANNEL : AN%u rn", ( uint16_t ) analogmux2_get_channel( &analogmux2 ) );
log_printf( &logger, "- - - - - - - - - - - - - rn" );
if ( analogmux2_read_an_pin_value ( &analogmux2, &analogmux2_an_value ) != ADC_ERROR ) {
log_printf( &logger, " ADC Value : %urn", analogmux2_an_value );
}
float analogmux2_an_voltage = 0;
if ( analogmux2_read_an_pin_voltage ( &analogmux2, &analogmux2_an_voltage ) != ADC_ERROR ) {
log_printf( &logger, " AN Voltage : %.3f V rn", analogmux2_an_voltage );
}
log_printf( &logger, "-------------------------rn" );
}
}
The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on mikroE Github account.
Other mikroE Libraries used in the example:
- MikroSDK.Board
- MikroSDK.Log
- Click.AnalogMux2
Additional Notes and Information
Depending on the development board you are using, you may need a USB UART click, USB UART 2 click or RS232 click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all MikroElektronika compilers, or any other terminal application of your choice, can be used to read the message.
MIKROSDK
The Analog MUX 2 Click Board™ is supported with mikroSDK - MikroElektronika Software Development Kit. To ensure proper operation of mikroSDK compliant Click board™ demo applications, mikroSDK should be downloaded from the LibStock and installed for the compiler you are using.
Software Support
We provide a library for the Analog MUX 2 Click Board™ as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
The package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on the mikroE Github account.
Library Description
This library contains API for the Analog MUX 2 Click Board™ driver.
Key Functions
void analogmux2_cfg_setup ( analogmux2_cfg_t *cfg );- Config Object Initialization function.ANALOGMUX2_RETVAL analogmux2_init ( analogmux2_t *ctx, analogmux2_cfg_t *cfg );- Initialization function.void analogmux2_default_cfg ( analogmux2_t *ctx );- Click Default Configuration function.
Example Description
This application controls the multiplexing of a single input channel with an eight-channel matrix switch.
The demo application is composed of two sections :
void application_task ( void ) {
for ( uint8_t ch_pos = ANALOGMUX2_SET_CHANNEL_0; ch_pos <= ANALOGMUX2_SET_CHANNEL_7; ch_pos++ ) {
analogmux2_set_channel( &analogmux2, ch_pos );
Delay_ms( 3000 );
uint16_t analogmux2_an_value = 0;
log_printf( &logger, " CHANNEL : AN%u rn", ( uint16_t ) analogmux2_get_channel( &analogmux2 ) );
log_printf( &logger, "- - - - - - - - - - - - - rn" );
if ( analogmux2_read_an_pin_value ( &analogmux2, &analogmux2_an_value ) != ADC_ERROR ) {
log_printf( &logger, " ADC Value : %urn", analogmux2_an_value );
}
float analogmux2_an_voltage = 0;
if ( analogmux2_read_an_pin_voltage ( &analogmux2, &analogmux2_an_voltage ) != ADC_ERROR ) {
log_printf( &logger, " AN Voltage : %.3f V rn", analogmux2_an_voltage );
}
log_printf( &logger, "-------------------------rn" );
}
}
The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on mikroE Github account.
Other mikroE Libraries used in the example:
- MikroSDK.Board
- MikroSDK.Log
- Click.AnalogMux2
Additional Notes and Information
Depending on the development board you are using, you may need a USB UART click, USB UART 2 click or RS232 click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all MikroElektronika compilers, or any other terminal application of your choice, can be used to read the message.
MIKROSDK
The Analog MUX 2 Click Board™ is supported with mikroSDK - MikroElektronika Software Development Kit. To ensure proper operation of mikroSDK compliant Click board™ demo applications, mikroSDK should be downloaded from the LibStock and installed for the compiler you are using.
Analoge MUX 2 Click-Platine
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.